研究者データベース

小山 真司
コヤマ シンジ
知能機械創製部門
准教授
Last Updated :2024/05/26

研究者基本情報

研究者

  • 氏名

    小山 真司, コヤマ シンジ

所属

  • 知能機械創製部門, 准教授

基本情報

  • 研究者氏名(日本語)

    小山, 真司
  • 研究者氏名(カナ)

    コヤマ, シンジ

使用外国語

  • 発表に使用する外国語

    英語
  • 執筆に使用する外国語

    英語

所属

  • 群馬大学, 准教授

所属部局等

  • 所属情報

    大学院理工学府, 知能機械創製部門
  • 職名情報

    准教授

学歴

  • 2001年03月, 2005年05月, 大阪大学, 工学研究科, 生産科学

学位

  • 博士(工学)

経歴

  • 2005年06月, 2008年01月, 応用科学研究所, 第1研究室, 研究員

研究活動情報

研究分野

  • ものづくり技術(機械・電気電子・化学工学), 加工学、生産工学
  • ナノテク・材料, 材料加工、組織制御
  • ものづくり技術(機械・電気電子・化学工学), 材料力学、機械材料
  • ものづくり技術(機械・電気電子・化学工学), 設計工学
  • ものづくり技術(機械・電気電子・化学工学), 機械要素、トライボロジー

研究キーワード

  • 機械加工
  • 金属材料
  • 接合
  • ろう付
  • 表面改質
  • 鉄鋼
  • はんだ

論文

  • Liquid-phase diffusion bonding of Al alloy for casting using formate coated insert sheet, S. Koyama, Y. Shinohara, 2024年03月, Welding International, 38, 319, 327, 研究論文(学術雑誌)
  • ギ酸塩被膜付与インサート材を用いた鋳造用Al合金の液相拡散接合, 小山真司, 篠原勇人, 2023年, 溶接学会論文集, 41, 364, 370, 研究論文(学術雑誌)
  • Synthesis and structure of a pyridine-stabilized silanone molybdenum complex and its reactions with PMe3 and acetone, T. Muraoka, Y. Suzuki, M. Tsuchimoto, G. Trigagema, K. Ueno, S. Koyama, 2022年, Dalton Trans., 51, 18203, 18212, 研究論文(学術雑誌)
  • 金属塩生成接合法を用いたパルスヒート援用Cu/Cu接合の検討, 小山真司, 鈴木宏和, 田部井由香里, 谷澤秀和, 岩渕昭夫, 2022年, 銅と銅合金, 61, 244, 247
  • ギ酸塩の生成・分解反応を利用したクロム銅の固相拡散接合, 小山真司, 武智正登, 村岡貴子, 2022年, 銅と銅合金, 61, 264, 267
  • ギ酸塩被膜付与Cuナノ粒子を用いたCu固相接合条件の緩和, 小山真司, 荒井悠平, 村岡貴子, 2022年, 銅と銅合金, 61, 240, 243, 研究論文(学術雑誌)
  • Structures and Mechanical Properties of Pure Titanium by Different Nitriding Temperatures, T. Chen, S. Koyama, 2022年, Key Engineering Materials, 918, 35, 40, 研究論文(学術雑誌)
  • Structures and Mechanical Properties of Pure Titanium by Different Boriding and Nitriding Conditions, T. Chen, S. Koyama, 2022年, Key Engineering Materials, 918, 9, 14, 研究論文(学術雑誌)
  • Influence of oxidation temperature on structure and mechanical properties of Titanium, T. Chen, S. Koyama, 2021年, Solid State Phenomena, 324, 15, 20, 研究論文(学術雑誌)
  • Influence of Nitriding Temperature on Mechanical and Tribological Properties of Titanium, T. Chen, S. Koyama, 2021年, Materials Science Forum, 1034, 3, 8
  • Influence of Boriding Temperature on Microstructure and Tribological Properties of Titanium, T. Chen, S. Koyama, 2020年, Solid State Sciences, 107, 106369-1, 106369-5
  • Microstructure, mechanical and tribological properties of TaCN composite films by reactive magnetron sputtering, Yu, Dian;Yu, Lihua;Jia, Pei;Ju, Hongbo;Luo, Huang;Xu, Junhua;Koyama, Shinji, 2020年, CERAMICS INTERNATIONAL, 46, 13, 20683, 20694
  • Microstructure, mechanical and tribological properties of VCN-Ag composite films by reactive magnetron sputtering, Yu, Dian;Yu, Lihua;Asempah, Isaac;Ju, Hongbo;Xu, Junhua;Koyama, Shinji;Gao, Yin, 2020年, SURFACE & COATINGS TECHNOLOGY, 399
  • Reforming of deformed aluminum foam by precursor foaming process, Y. Hangai, H. Matsushita, R. Suzuki, S. Koyama, K. Amagai, R. Nagahiro, T. Utsunomiya, M. Matsubara, N. Yoshikawa, 2019年, J. Porous Mater.
  • ギ酸塩被膜処理Zn シートを用いたAl合金の液相拡散接合強度に及ぼす接合表面粗さの影響, 篠原 勇人;小山 真司, 2019年, 溶接学会全国大会講演概要, Preprints of the National Meeting of JWS, 2019, 0, 344, 345
  • 酢酸を用いた金属塩生成接合法によるA6061/高張力鋼板の固相接合, 小山 真司;小澤 昂平;村岡 貴子, 2019年, 軽金属, Journal of Japan Institute of Light Metals, 69, 11, 548, 552
  • Al 合金の液相拡散接合実用化に向けたZnシート表面の金属塩被膜処理条件の緩和, 篠原 勇人;小山 真司, 2019年, 鋳造工学 全国講演大会講演概要集, Journal of the Reports of the Japan Foundry Engineering Society Meeting, 174, 0, 44, 44
  • チタンの微細構造に及ぼす浸炭温度の影響と機械的特性評価, 陳 彤;小山 真司, 2019年, 年次大会, The Proceedings of Mechanical Engineering Congress, Japan, 2019, 0
  • Al添加溶融ほう砂浴を用いたほう化処理によるSCM440鋼の機械的特性の向上, 吉田 駿;小山 真司, 2019年, 年次大会, The Proceedings of Mechanical Engineering Congress, Japan, 2019, 0
  • Al合金の接合強度に及ぼすZnインサート材のギ酸塩被膜付与条件の影響, 篠原 勇人;小山 真司, 2019年, 年次大会, The Proceedings of Mechanical Engineering Congress, Japan, 2019, 0
  • ギ酸塩被膜付与 Zn シートを用いた Al 合金の大気中液相拡散接合強度に及ぼす接合面粗さの影響, 篠原 勇人;小山 真司, 2019年, 生産加工・工作機械部門講演会 : 生産と加工に関する学術講演会, The Proceedings of The Manufacturing & Machine Tool Conference, 2019, 0
  • チタンの表面特性に及ぼすほう化処理条件の影響, 陳 彤;小山 真司, 2019年, 生産加工・工作機械部門講演会 : 生産と加工に関する学術講演会, The Proceedings of The Manufacturing & Machine Tool Conference, 2019, 0
  • ギ酸塩被膜付与Znシートを用いたA6061合金液相拡散接合継手の機械的特性に及ぼすT6処理の影響, 篠原 勇人;小山 真司, 2019年, 機械材料・材料加工技術講演会講演論文集, The Proceedings of the Materials and processing conference, 2019, 0
  • Fabrication of bilayer tube consisting of outer aluminum foam tube and inner dense aluminum tube by friction stir back extrusion, 2018年, Materials Today Communications
  • Influence of Ag Content on the Microstructure, Mechanical, and Tribological Properties of ZrN-Ag Films, T. Chen, L. Yu, H. Ju, Y. Geng, J. Xu, S. Koyama, 2018年, J. Nano Reserch
  • Influence of Cu Content on the Microstructure, Mechanical, and Tribological Properties of ZrN-Cu Films, Chen, Tong;Yu, Lihua;Ju, Hongbo;Xu, Junhua;Koyama, Shinji, 2018年, NANO, 13, 4
  • Fabrication of bilayer tube consisting of outer aluminum foam tube and inner dense aluminum tube by friction stir back extrusion, Hangai, Yoshihiko;Otazawa, Shunsuke;Utsunomiya, Takao;Suzuki, Ryosuke;Koyama, Shinji;Matsubara, Masaaki;Yoshikawa, Nobuhiro, 2018年, MATERIALS TODAY COMMUNICATIONS, 15, 36, 42
  • Influence of Ag Content on the Microstructure, Mechanical, and Tribological Properties of ZrN-Ag Films, Chen, Tong;Yu, Lihua;Ju, Hongbo;Geng, Yaoxiang;Xu, Junhua;Koyama, Shinji, 2018年, JOURNAL OF NANO RESEARCH, 54, 88, 97
  • 溶融法により作製した発泡アルミニウム材料の圧潰後の残存発泡剤による再発泡, 半谷 禎彦;松下 駿人;西本 拓真;鈴木 良祐;小山 真司;松原 雅昭;清水 克成;秋元 清隆;吉川 暢宏, 2018年, 鋳造工学, Journal of Japan Foundry Engineering Society, 90, 7, 381, 385
  • ほう化処理によるインコネルの表面特性の向上, 安澤 佳希;小山 真司;井上 雅博;西田 進一, 2018年, 茨城講演会講演論文集, The Proceedings of Ibaraki District Conference, 2018, 0
  • 冷間工具鋼のほう化処理条件の最適化, 秋元 直也;小山 真司;井上 雅博;西田 進一, 2018年, 北海道支部講演会講演概要集, The Proceedings of Conference of Hokkaido Branch, 2018, 0
  • ほう素・炭素の拡散浸透処理によるチタンの表面特性の向上, 安澤 佳希;小山 真司;井上 雅博;西田 進一, 2018年, 北海道支部講演会講演概要集, The Proceedings of Conference of Hokkaido Branch, 2018, 0
  • A7075の液相拡散接合強度に及ぼすZnインサート材の金属塩被膜処理効果, 藤森 裕介;小山 真司;井上 雅博;西田 進一, 2018年, 北海道支部講演会講演概要集, The Proceedings of Conference of Hokkaido Branch, 2018, 0
  • Al添加溶融ほう砂浴を用いたSS400のほう化処理に及ぼす処理時間の影響, 川崎 智恵;小山 真司;井上 雅博;西田 進一, 2018年, 北海道支部講演会講演概要集, The Proceedings of Conference of Hokkaido Branch, 2018, 0
  • 各種有機酸を用いた金属塩被膜処理によるA6061/高張力鋼板の接合界面特性に及ぼす影響, 小澤 昂平;小山 真司;井上 雅博;西田 進一, 2018年, 北海道支部講演会講演概要集, The Proceedings of Conference of Hokkaido Branch, 2018, 0
  • Reproducibility of Aluminum Foam by Combining Sintering and Dissolution Process with Precursor Foaming Process, Hangai, Yoshihiko; Matsushita, Hayato; Koyama, Shinji; Suzuki, Ryosuke; Matsubara, Masaaki, 2017年, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
  • Cutting process for aluminum foam fabricated by sintering and dissolution process, Hangai, Yoshihiko; Nguyen Ngoc Minh; Morita, Tomoaki; Suzuki, Ryosuke; Matsubara, Masaaki; Koyama, Shinji, 2017年, ADVANCED POWDER TECHNOLOGY
  • Foaming behavior of aluminum foam precursor induced by friction heat generated by rotating tool used for spot friction stir welding, Hangai, Yoshihiko; Takada, Keisuke; Endoh, Ryoya; Koyama, Shinji; Utsunomiya, Takao, 2017年, JOURNAL OF MANUFACTURING PROCESSES
  • Change of Crystallographic Orientation Characteristics of (001)-Oriented Electrodeposited Silver Films During Self-Annealing at Room Temperature, Y. Hayashi, I. Shohji, S. Koyama, H. Miyazawa, 2017年, Procedia Engineering, 184, 725, 731
  • Effect of Rust Inhibitor in Brine on Corrosion Properties of Copper, K. Higuchi, I. Shohji, T. Ando, S. Koyama, Y. Mizutani, Y. Inoue, 2017年, Procedia Engineering, 184, 743, 749
  • Degradation Behaviors of Adhesion Strength between Epoxy Resin and Copper Under Aging at High Temperature, Y. Tonozuka, I. Shohji, S. Koyama, H. Hokazono, 2017年, Procedia Engineering, 184, 648, 654
  • Bonding Characteristics of Sn-57Bi-1Ag Low-Temperature Lead-Free Solder to Gold-Plated Copper, Y. Maruya, H. Hata, I. Shohji, S. Koyama, 2017年, Procedia Engineering, 184, 223, 230
  • Fracture Behaviors of Miniature Size Specimens of Sn-5Sb Lead-Free Solder under Tensile and Fatigue Conditions, K. Kobayashi, I. Shohji, S. Koyama, H. Hokazono, 2017年, Procedia Engineering, 184, 238, 245
  • Effect of Bonding Time and Bonding Temperature on Lead-Free Solder Joints Dispersed Pillar Shaped IMCs, Y. Hayashi, U. Nakata, I. Shohji, S. Koyama, T. Hashimoto, 2017年, Procedia Engineering, 184, 214, 222
  • Degradation Behaviors of Adhesion Strength of Structural Adhesive for Weld-Bonding under High Temperature and Humidity Conditions, Y. Tomita, I. Shohji, S. Koyama, S. Shimizu, 2017年, Procedia Engineering, 184, 231, 237
  • Liquid Phase Diffusion Bonding of AC2C/ADC12 Aluminum Casting Alloy by Using Metal Salt Coated Zn Sheet, Saijo, S. Koyama, I. Shohji, 2017年, Procedia Engineering, 184, 284, 289
  • 金属塩被膜付与Znシートを用いた鋳造用Al合金の液相拡散接合, 西城舜哉, 小山真司, 荘司郁夫, 2017年, スマートプロセス学会誌, 6, 195-199
  • Liquid Phase Diffusion Bonding of A1070 by Using Metal Formate Coated Zn Sheet, K. Ozawa, S. Koyama, I. Shohji, 2017年, Journal of Physics: Conf. Series
  • The Effect of Boriding on Wear Resistance of Cold Work Tool Steel, Y. Anzawa, S. Koyama, I Shohji, 2017年, Journal of Physics: Conf. Series
  • Solid-State Diffusion Bonding of Titanium by Using Metal Salt Coated Aluminum Sheet, 2017年, Key Engineering Materials
  • Foaming behavior of aluminum foam precursor induced by friction heat generated by rotating tool used for spot friction stir welding, Hangai, Yoshihiko;Takada, Keisuke;Endoh, Ryoya;Koyama, Shinji;Utsunomiya, Takao, 2017年, JOURNAL OF MANUFACTURING PROCESSES, 25, 426, 431
  • Cutting process for aluminum foam fabricated by sintering and dissolution process, Hangai, Yoshihiko;Nguyen Ngoc Minh;Morita, Tomoaki;Suzuki, Ryosuke;Matsubara, Masaaki;Koyama, Shinji, 2017年, ADVANCED POWDER TECHNOLOGY, 28, 5, 1426, 1429
  • Reproducibility of Aluminum Foam by Combining Sintering and Dissolution Process with Precursor Foaming Process, Hangai, Yoshihiko;Matsushita, Hayato;Koyama, Shinji;Suzuki, Ryosuke;Matsubara, Masaaki, 2017年, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A, 7, 3161, 3163
  • 冷間工具鋼の摩擦特性と耐摩耗性に及ぼすほう化処理の効果, 安澤 佳希;小山 真司;井上 雅博;西田 進一, 2017年, 茨城講演会講演論文集, The Proceedings of Ibaraki District Conference, 2017, 0
  • 金属塩被膜付与Zn シートを用いた鋳造用Al 合金の液相拡散接合, 西城 舜哉;小山 真司;荘司 郁夫, 2017年, スマートプロセス学会誌, Journal of Smart Processing, 6, 5, 195, 199
  • Functionally Graded Aluminum Foam Fabricated by Friction Powder Sintering Process with Traversing Tool, Hangai, Yoshihiko; Morita, Tomoaki; Koyama, Shinji; Kuwazuru, Osamu; Yoshikawa, Nobuhiro, 2016年, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • Effect of Interfacial Hardness on Failure Modes of Liquid Phase Diffusion Bonded Sn/Sn with Bi Filler, Koyama, Shinji; Oya, Issei; Shohji, Ikuo, 2016年, MATERIALS TRANSACTIONS
  • Direct bonding of SUS304 stainless steel by metal salt generation bonding technique with formic acid, Shinji Koyama, Tatsunori Tsuneto, 2016年, Procedia Materials Science
  • Solid-State Bonding of 5052 Aluminum Alloy/316L Stainless Steel by Using Organic Salt Formation/Decomposition Reaction, H. Saito, S. Koyama, 2016年, Materials Science Forum
  • Functionally Graded Aluminum Foam Fabricated by Friction Powder Sintering Process with Traversing Tool, Hangai, Yoshihiko;Morita, Tomoaki;Koyama, Shinji;Kuwazuru, Osamu;Yoshikawa, Nobuhiro, 2016年, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 25, 9, 3691, 3696
  • Effect of Interfacial Hardness on Failure Modes of Liquid Phase Diffusion Bonded Sn/Sn with Bi Filler, Koyama, Shinji;Oya, Issei;Shohji, Ikuo, 2016年, MATERIALS TRANSACTIONS, 57, 6, 810, 814
  • Effect of Interfacial Hardness on Failure Modes of Liquid Phase Diffusion Bonded Sn/Sn with Bi Filler, Koyama Shinji;Oya Issei;Shohji Ikuo, 2016年, MATERIALS TRANSACTIONS, 57, 6, 810, 814
  • 炭酸カルシウムを発泡剤として用いたポーラスアルミニウムの創製, 松下 駿人;半谷 禎彦;鈴木 良祐;松原 雅昭;小山 真司, 2016年, M&M材料力学カンファレンス, The Proceedings of the Materials and Mechanics Conference, 2016, 0, OS15, 6
  • Fabrication of Aluminum Tubes Filled with Aluminum Alloy Foam by Friction Welding., Hangai Yoshihiko;Nakano Yukiko;Koyama Shinji;Kuwazuru Osamu;Kitahara Soichiro;Yoshikawa Nobuhiro, 2015年10月23日, Materials (Basel, Switzerland), 8, 10
  • Fabrication of Aluminum Tubes Filled with Aluminum Alloy Foam by Friction Welding, Hangai, Yoshihiko; Nakano, Yukiko; Koyama, Shinji; Kuwazuru, Osamu; Kitahara, Soichiro; Yoshikawa, Nobuhiro, 2015年10月, MATERIALS
  • Cu/Cu direct bonding by metal salt generation bonding technique with organic acid and persistence of reformed layer, Koyama, Shinji; Hagiwara, Naoki; Shohji, Ikuo, 2015年03月, JAPANESE JOURNAL OF APPLIED PHYSICS
  • 金属材料表面の高硬度・耐摩耗性の向上技術, 小山真司, 2015年, ケミカルエンジニアリング, 60, 2, 64-67
  • 入門教室Q&A 拡散接合 第3回 拡散接合の設備構成と接合部の評価方法, 小山真司, 2015年, 溶接技術, 63, 3, 96-98
  • 入門教室Q&A 拡散接合 第2回 拡散接合の種類と適用事例, 小山真司, 2015年, 溶接技術, 63, 2, 112-114
  • 入門教室Q&A 拡散接合 第1回 拡散接合の歴史と拡散接合メカニズム, 小山 真司, 2015年, 溶接技術, 63, 1, 123-125
  • Fabrication of Aluminum Tubes Filled with Aluminum Alloy Foam by Friction Welding, Hangai, Yoshihiko;Nakano, Yukiko;Koyama, Shinji;Kuwazuru, Osamu;Kitahara, Soichiro;Yoshikawa, Nobuhiro, 2015年, MATERIALS, 8, 10, 7180, 7190
  • ギ酸アルミニウムの生成・分解反応を利用した純Al/SUS304ステンレス鋼の固相接合, 齋藤 広輝;小山 真司, 2015年, 溶接学会全国大会講演概要, Preprints of the National Meeting of JWS, 2015, 0, 86, 87
  • 金属塩生成接合法によるAl合金の精密固相接合(トピックス), 小山 真司, 2015年, 日本機械学会誌, Journal of the Society of Mechanical Engineers, 118, 1156
  • Solid state bonding of Al alloy/SUS304 by metal salt generation bonding technique with acetic acid, Kota Matsubara, Shinji Koyama, Hideo Nagata, Yoshiyuki Suda, Ikuo Shohji, 2014年, Advanced Materials Research
  • A study of solid state bonding strength of nonferrous metals by using metal salt generation bonding method, Shinji Koyama, 2014年, Materials Science Forum
  • Effect of Filler Content and Coupling Agent on Mechanical Properties of Underfill Material, Hironao Mitsugi, Shinya Kitagoh, Ikuo Shohji, Shinji Koyama, 2014年10月, Transactions of the Japan Institute of Electronics Packaging
  • Effect of Filler Content and Coupling Agent on Mechanical Properties of Underfill Material, Mitsugi Hironao;Kitagoh Shinya;Shohji Ikuo;Koyama Shinji, 2014年, Transactions of The Japan Institute of Electronics Packaging, 7, 1, 25, 31
  • 国際会議参加報告 THERMEC '2013, 小山 真司, 2014年, 溶接学会誌, JOURNAL OF THE JAPAN WELDING SOCIETY, 83, 3, 224, 225
  • 金属塩の生成・分解反応による非鉄金属材料の低温接合技術, 小山真司, 2013年, ケミカルエンジニアリング, 58, 7, 50-56
  • A Study of the Effect of Indium Filler Metal on the Bonding Strength of Copper and Tin, Koyama, Shinji; Seng Keat Ting; Aoki, Yukinari; Shohji, Ikuo, 2013年11月, Transactions of the Japan Institute of Electronics Packaging
  • Effect of Surface Modification by Aqueous NaOH Solution on Bond Strength of Solid-State Bonded Interface of Al, Koyama, Shinji; Keat, Ting Seng; Amari, Shun; Matsubara, Kouta; Shohji, Ikuo, 2013年10月, MATERIALS TRANSACTIONS
  • Fabrication and Tensile Property of Sandwich Panel with ADC12 Foam Core by Friction Stir Processing Route, Utsunomiya, Takao; Ishii, Nobuyuki; Hangai, Yoshihiko; Koyama, Shinji; Kitahara, Soichiro; Kuwazuru, Osamu; Yoshikawa, Nobuhiro, 2013年09月, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 77, 9, 385-390
  • 摩擦攪拌法によるADC12フォームコアサンドイッチパネルの作製と引張り特性, 宇都宮 登雄;石井 伸幸;半谷 禎彦;小山 真司;北原 総一郎;桑水流 理;吉川 暢宏, 2013年09月, 日本金屬學會誌, Journal of the Japan Institute of Metals and Materials, 77, 9, 385, 390
  • Sn/Sn固相接合強度に対する金属塩生成接合法の適用効果, 小山 真司, 2013年01月, スマートプロセス学会誌 = Journal of smart processing, Journal of Smart Processing, 2, 1, 47, 51
  • 「ホウ素」-超高硬度表面処理マテリアルとしての可能性について, 小山 真司, 2013年, マテリアルステージ, 142, 56-58
  • Effect of Surface Modification by Aqueous NaOH Solution on Bond Strength of Solid-State Bonded Interface of Al, Koyama, Shinji;Keat, Ting Seng;Amari, Shun;Matsubara, Kouta;Shohji, Ikuo, 2013年, MATERIALS TRANSACTIONS, 54, 10, 1975, 1980
  • A Study of the Effect of Indium Filler Metal on the Bonding Strength of Copper and Tin, Koyama Shinji;Ting Seng Keat;Aoki Yukinari;Shohji Ikuo, 2013年, Transactions of The Japan Institute of Electronics Packaging, 6, 1, 93, 98
  • その場生成したCuAl2を分散させたポーラスAlコア充填パイプ複合部材の創製, 田島 敏宣;半谷 禎彦;齋藤 雅樹;小山 真司;藤井 英俊;孫 玉峰;森貞 好昭;桑水流 理;吉川 暢宏, 2013年, 日本機械学会論文集 A編, TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 79, 804, 1071, 1075
  • 金属塩生成接合法によるAlとCuの固相接合, 秦 紘一;小山 真司;松原 広太, 2012年09月, 溶接学会全国大会講演概要, Preprints of the National Meeting of JWS, 91, 110, 111
  • ギ酸を用いた金属塩生成接合法によるAl合金/SUS304の固相接合, 松原 広太;小山 真司;秦 紘一, 2012年09月, 溶接学会全国大会講演概要, Preprints of the National Meeting of JWS, 91, 108, 109
  • ギ酸を用いた金属塩生成接合法によるCu/Cu固相接合, 萩原 尚基;小山 真司, 2012年09月, 溶接学会全国大会講演概要, Preprints of the National Meeting of JWS, 91, 106, 107
  • Relationship between Porosity and Interface Fracture on Aluminum Foam Sandwich with Dense Steel Face Sheets Fabricated by Friction Stir Processing Route, UTSUNOMIYA Takao;ISHII Nobuyuki;HANGAI Yoshihiko;KOYAMA Shinji;KUWAZURU Osamu;YOSHIKAWA Nobuhiro, 2012年09月, Mater. Trans., 53, 9, 1674, 1679
  • 摩擦攪拌法による発泡剤不使用ADC12ポーラスアルミニウムと緻密鋼材の複合構造部材の作製, 半谷 禎彦;石井 伸幸;小山 真司;宇都宮 登雄;北原 総一郎, 2012年05月, 日本金屬學會誌, 76, 5, 349, 354
  • 金属塩生成接合法による錫の低温固相接合, 小山 真司, 2012年04月, 溶接学会誌 = Journal of the Japan Welding Society, JOURNAL OF THE JAPAN WELDING SOCIETY, 81, 3, 154, 157
  • Fabrication and Tensile Tests of Aluminum Foam Sandwich with Dense Steel Face Sheets by Friction Stir Processing Route, HANGAI Yoshihiko;ISHII Nobuyuki;KOYAMA Shinji;UTSUNOMIYA Takao;KUWAZURU Osamu;YOSHIKAWA Nobuhiro, 2012年04月, Materials Transactions, 53, 4, 584, 587
  • Fabrication and Tensile Tests of Aluminum Foam Sandwich with Dense Steel Face Sheets by Friction Stir Processing Route, Y. Hangai, N. Ishii, S. Koyama, T. Utsunomiya, O. Kuwazuru and N. Yoshikawa, 2012年, Materials Transactions
  • Relationship between Porosity and Interface Fracture on Aluminum Foam Sandwich with Dense Steel Face Sheets Fabricated by Friction Stir Processing Route, T. Utsunomiya, N. Ishii, Y. Hangai, S. Koyama, O. Kuwazuru and N. Yoshikawa, 2012年, Materials Transactions
  • 集まれエンジニア! 金属塩生成接合法による錫の低温固相接合, 小山真司, 2012年, 溶接学会誌, 81, 154-157
  • Fabrication and Tensile Tests of Aluminum Foam Sandwich with Dense Steel Face Sheets by Friction Stir Processing Route, Hangai, Yoshihiko;Ishii, Nobuyuki;Koyama, Shinji;Utsunomiya, Takao;Kuwazuru, Osamu;Yoshikawa, Nobuhiro, 2012年, MATERIALS TRANSACTIONS, 53, 4, 584, 587
  • Fabrication of Composite Structural Material with ADC12 Porous Aluminum and Dense Steel by Friction Stir Welding Route, Hangai, Yoshihiko;Ishii, Nobuyuki;Koyama, Shinji;Utsunomiya, Takao;Kitahara, Soichiro, 2012年, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 76, 5, 349, 354
  • Relationship between Porosity and Interface Fracture on Aluminum Foam Sandwich with Dense Steel Face Sheets Fabricated by Friction Stir Processing Route, Utsunomiya, Takao;Ishii, Nobuyuki;Hangai, Yoshihiko;Koyama, Shinji;Kuwazuru, Osamu;Yoshikawa, Nobuhiro, 2012年, MATERIALS TRANSACTIONS, 53, 9, 1674, 1679
  • ADC12ダイカストを用いたADC12ポーラスAl コアサンドイッチパネルの作製, 石井 伸幸;半谷 禎彦;小山 真司;宇都宮 登雄;北原 総一郎;桑水流 理;吉川 暢宏, 2012年, 鋳造工学 全国講演大会講演概要集, Journal of the Reports of the Japan Foundry Engineering Society Meeting, 161, 0, 56, 56
  • SUS304ステンレス鋼のB添加溶融塩浴を用いたほう化処理に及ぼす処理温度の影響, 小山 真司;福田 達也;川澄 健太郎;荘司 郁夫, 2011年12月, 日本金屬學會誌, Journal of the Japan Institute of Metals and Materials, 75, 12, 684, 689
  • SUS304ステンレス鋼のほう化処理に及ぼす溶融塩浴中のB添加量の影響, 小山 真司;高田 大士;川澄 健太郎;福田 達也;荘司 郁夫, 2011年12月, 日本金屬學會誌, Journal of the Japan Institute of Metals and Materials, 75, 12, 678, 683
  • レーザ変位法を用いたソルダペーストぬれ性評価装置の開発, 荘司 郁夫;小山 真司;大屋 一生;伊坂 俊宏;宮本 博永;西室 将;平本 清, 2011年08月, エレクトロニクス実装学会誌 = Journal of Japan Institute of Electronics Packaging, Journal of The Japan Institute of Electronics Packaging, 14, 5, 390, 393
  • Sn/Ni接合界面の引張強さに及ぼすInフィラーメタルの適用効果, 小山 真司;伊坂 俊宏;荘司 郁夫, 2011年08月, エレクトロニクス実装学会誌 = Journal of Japan Institute of Electronics Packaging, Journal of The Japan Institute of Electronics Packaging, 14, 5, 377, 381
  • 錫と電極材料の拡散接合強度に及ぼすギ酸の表面改質効果, 小山 真司, 2011年07月, 高温学会誌, Journal of High Temperature Society, 37, 4, 169, 177
  • ろう付・はんだ付, 宮沢 靖幸;小山 真司, 2011年07月, 溶接学会誌 = Journal of the Japan Welding Society, Journal of the Japan Welding Society, 80, 5, 454, 457
  • Fabrication of A1050-A6061 Functionally Graded Aluminum Foam by Friction Stir Processing Route, Y. Hangai, Y. Oba, S. Koyama and T. Utsunomiya, 2011年, Metallurgical and Materials Transactions A
  • 錫と電極材料の拡散接合強度に及ぼすギ酸の表面改質効果, 小山真司, 2011年, 高温学会誌, 37, 169-177
  • Fabrication of A1050-A6061 Functionally Graded Aluminum Foam by Friction Stir Processing Route, Hangai, Yoshihiko;Oba, Yutaro;Koyama, Shinji;Utsunomiya, Takao, 2011年, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 42A, 12, 3585, 3589
  • Effect of B Contents in Fused Salt Bath on Boriding of SUS304 Stainless Steel, Koyama, Shinji;Takada, Masashi;Kawasumi, Kentaro;Fukuda, Tatsuya;Shohji, Ikuo, 2011年, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 75, 12, 678, 683
  • II 溶接・接合プロセスとシステム化技術 6. ろう付・はんだ付, 宮沢 靖幸;小山 真司, 2011年, 溶接学会誌, JOURNAL OF THE JAPAN WELDING SOCIETY, 80, 5, 454, 457
  • Al添加溶融ほう砂浴を用いたSUS304ステンレス鋼のほう化処理に及ぼす処理温度の影響, 小山 真司;川澄 健太郎;福田 達也;荘司 郁夫, 2011年, 日本機械学会論文集 A編, TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 77, 783, 1986, 1993
  • A1050-A6061傾斜機能ポーラスアルミニウムの作製, 半谷 禎彦;大場 裕太朗;小山 真司;長谷川 誠;宇都宮 登雄, 2011年, 日本機械学会論文集 A編, TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 77, 779, 1021, 1024
  • 摩擦攪拌法によるポーラスアルミニウム/緻密鋼板サンドイッチパネルの作製, 宇都宮 登雄;石井 伸幸;半谷 禎彦;小山 真司;長谷川 誠;桑水流 理;吉川 暢宏, 2011年, 日本機械学会論文集 A編, TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 77, 779, 1013, 1016
  • 摩擦攪拌法を用いたADC12-A1050傾斜機能ポーラスアルミニウムの作製, 半谷 禎彦;大関 雄一郎;小山 真司;宇都宮 登雄, 2011年, 日本機械学会論文集 A編, TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 77, 775, 517, 525
  • 117204 摩擦攪拌法で作製したポーラスアルミニウム/緻密鋼板サンドイッチパネルの引張り挙動(一般01 材料科学・材料力学2), 石井 伸幸;半谷 禎彦;小山 真司;桑水流 理;長谷川 誠;宇都宮 登雄;吉川 暢宏, 2011年, 日本機械学会関東支部総会講演会講演論文集, The Proceedings of Conference of Kanto Branch, 2011, 0, 21, 22
  • 錫/錫の固相接合界面の酸化皮膜に対する酢酸による改質効果, 小山 真司;大屋 一生, 2010年11月, 日本金屬學會誌, Journal of the Japan Institute of Metals and Materials, 74, 11, 733, 739
  • Effect of Formic Acid Surface Modification on Bond Strength of Solid-State Bonded Interface of Tin and Copper, Shinji Koyama, Yukinari Aoki and Ikuo Shohji, 2010年10月, Materials Transactions
  • Fluxless Bonding of Ni-P/Cu Plated Al Alloy and Cu Alloy with Lead-Free Sn-Cu foil, I. Shohji, S. Koyama, K. Oshiro, H. Nara and Y. Iwata, 2010年10月, Materials Transactions
  • 炭素鋼とチタン箔の拡散接合と表面窒化同時処理の検討, 小山 真司;川澄 健太郎, 2010年10月, 日本金屬學會誌, Journal of the Japan Institute of Metals, 74, 10, 656, 661
  • Effect of Formic Acid Surface Modification on Bond Strength of Solid-State Bonded Interface of Tin and Copper, KOYAMA Shinji;AOKI Yukinari;SHOHJI Ikuo, 2010年10月, MATERIALS TRANSACTIONS, 51, 10, 1759, 1763
  • Fluxless Bonding of Ni-P/Cu Plated Al Alloy and Cu Alloy with Lead-Free Sn-Cu Foil, SHOHJI Ikuo;KOYAMA Shinji;OSHIRO Itaru;NARA Hideaki;IWATA Yoshiharu, 2010年10月, MATERIALS TRANSACTIONS, 51, 10, 1753, 1758
  • 錫/錫圧接界面強度に及ぼすフッ化水素酸によるハロゲン化処理の影響, 小山真司, 2010年09月, 日本機械学会論文集A編, 76, 1211-1218
  • Fabrication of Aluminum Foam/Dense Steel Composite by Friction Stir Welding, Y. Hangai, S. Koyama, M. Hasegawa, T. Utunomiya, 2010年06月, Metallurgical and Materials Transactions
  • 異種アルミニウム合金による傾斜機能ポーラスアルミニウムの創製, 半谷 禎彦;小山 真司;宇都宮 登雄;長谷川 誠, 2010年04月, 日本金屬學會誌, Journal of the Japan Institute of Metals, 74, 4, 285, 287
  • Nondestructive Observation of Pore Structures of A1050 Porous Aluminum Fabricated by Friction Stir Processing, HANGAI Yoshihiko;OZEKI Yuichiro;KAWANO Shigehiro;UTSUNOMIYA Takao;KUWAZURU Osamu;HASEGAWA Makoto;KOYAMA Shinji;YOSHIKAWA Nobuhiro, 2010年03月, Materials Transactions, 51, 3, 548, 552
  • 摩擦攪拌法によるポーラスアルミニウム/緻密鋼材の複合構造部材の作製, 半谷 禎彦;小山 真司;宇都宮 登雄;長谷川 誠, 2010年02月, 日本金屬學會誌, 74, 2, 131, 133
  • Effect of Formic Acid Surface Modification on Bond Strength of Solid-State Bonded Interface of Tin and Copper, Koyama, Shinji;Aoki, Yukinari;Shohji, Ikuo, 2010年, MATERIALS TRANSACTIONS, 51, 10, 1759, 1763
  • Examination of Simultaneous Processing of Diffusion Bonding and Nitriding between Carbon Steel and Titanium Foil, Koyama, Shinji;Kawasumi, Kentaro, 2010年, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 74, 10, 656, 661
  • Manufacturing of Composite Structural Material with Porous Aluminum/Dense Steel via Friction Stir Welding Route, Hangai, Yoshihiko;Koyama, Shinji;Utsunomiya, Takao;Hasegawa, Makoto, 2010年, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 74, 2, 131, 133
  • Fabrication of Aluminum Foam/Dense Steel Composite by Friction Stir Welding, Hangai, Yoshihiko;Koyama, Shinji;Hasegawa, Makoto;Utsunomiya, Takao, 2010年, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 41A, 9, 2184, 2186
  • Effect of Surface Modification by Acetic Acid on Superficial Oxide Film of the Solid-State Bonded Joint of Tin, Koyama, Shinji;Oya, Issei, 2010年, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 74, 11, 733, 739
  • 427 摩擦攪拌法によるポーラスアルミニウム/緻密鋼板サンドイッチパネルの作製(溶接・接合のプロセスと評価(1),ものづくりにおける基礎研究と先端技術の融合), 石井 伸幸;半谷 禎彦;小山 真司;長谷川 誠;宇都宮 登雄, 2010年, 機械材料・材料加工技術講演会講演論文集, The Proceedings of the Materials and processing conference, 2010, 0, _427, 1_-_427-3_
  • 211 A1050-A6061傾斜機能ポーラスアルミニウムの作製(金属/金属基複合材料(1),ものづくりにおける基礎研究と先端技術の融合), 大場 裕太朗;半谷 禎彦;小山 真司;長谷川 誠;宇都宮 登雄, 2010年, 機械材料・材料加工技術講演会講演論文集, The Proceedings of the Materials and processing conference, 2010, 0, _211, 1_-_211-3_
  • 錫/錫圧接界面強度に及ぼすフッ化水素酸によるハロゲン化処理の影響, 小山 真司, 2010年, 日本機械学会論文集 A編, TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 76, 769, 1221, 1228
  • 錫の固相圧接界面強度に及ぼす塩化水素酸によるハロゲン化処理の影響, 小山 真司;川元 聡, 2009年11月, 日本金屬學會誌, Journal of the Japan Institute of Metals, 73, 11, 839, 845
  • 錫/錫固相接合の界面強度に及ぼすギ酸の表面改質効果, 小山 真司;大屋 一生, 2009年10月, 日本金屬學會誌, Journal of the Japan Institute of Metals and Materials, 73, 10, 809, 815
  • Effect of Formic Acid Surface Modification on Bond Strength of Solid-State Bonded Interface of Tin, Koyama, Shinji;Oya, Issei, 2009年, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 73, 10, 809, 815
  • Effect of Halogenation Treatment by Hydrochloric Acid on Bond Strength of Pressure Weld Interface of Tin, Koyama, Shinji;Kawamoto, Satoshi, 2009年, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 73, 11, 839, 845
  • Behavior of Superficial Oxide Film at Diffusion-Bonded Interface of Tin and Its Influence on Bond Strength, S. Koyama, M. Takahashi and K. Ikeuchi, 2007年06月, Cera. Trans.
  • Behavior of Oxide Film in Transient-Liquid-Phase Bonding of Tin with Filler of Bismuth Film, S. Koyama, M. Takahashi and K. Ikeuchi, 2007年, Materials Science Forum
  • Behavior of Superficial Oxide Film in Solid-State Diffusion-Bonded of Tin and Its Influence of Bond Strength, S. Koyama, M. Takahashi and K. Ikeuchi, 2004年10月, Acta. Metall. Slovaca.
  • Influence of Surface Treatment on Interfacial Microstructure and Bond Strength of Diffusion-Bonded Tin, S. Koyama, M. Takahashi and K. Ikeuchi, 2004年08月, Solid State Ionics
  • Behavior of Superficial Oxide Film at Solid-State Diffusion Bonded Interface of Tin, S. Koyama, M. Takahashi and K. Ikeuchi, 2004年02月, Materials Transactions
  • Multistage Transitions of Perovskite-Type Ferroelectrics Seen with “mK-Stabilized Cells”, A. Kojima, S. Koyama, T Yoshioka, Y. Yoshimura, H. Kwasaki and K. Tozaki, 2000年01月, Ferroelectrics
  • Nondestructive Observation of Pore Structures of A1050 Porous Aluminum Fabricated by Friction Stir Processing, Hangai, Yoshihiko;Ozeki, Yuichiro;Kawano, Shigehiro;Utsunomiya, Takao;Kuwazuru, Osamu;Hasegawa, Makoto;Koyama, Shinji;Yoshikawa, Nobuhiro, 2010年, MATERIALS TRANSACTIONS, MATERIALS TRANSACTIONS, 51, 3, 548, 552
  • Manufacturing of Functionally Graded Porous Aluminum of Dissimilar Aluminum Alloy, Hangai, Yoshihiko;Koyama, Shinji;Utsunomiya, Takao;Hasegawa, Makoto, 2010年, JOURNAL OF THE JAPAN INSTITUTE OF METALS, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 74, 4, 285, 287
  • Flux less Bonding of Ni-P/Cu Plated Al Alloy and Cu Alloy with Lead-Free Sn-Cu Foil, Shohji, Ikuo;Koyama, Shinji;Oshiro, Itaru;Nara, Hideaki;Iwata, Yoshiharu, 2010年, MATERIALS TRANSACTIONS, MATERIALS TRANSACTIONS, 51, 10, 1753, 1758
  • Influence of Processing Temperature on Boriding of SUS304 Stainless Steel by B Added Fused Salt Bath, Koyama, Shinji;Fukuda, Tatsuya;Kawasumi, Kentaro;Shohji, Ikuo, 2011年, JOURNAL OF THE JAPAN INSTITUTE OF METALS, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 75, 12, 684, 689
  • Influence of Oxidation Processing Temperature on the Structure, Mechanical and Tribological Properties of Titanium Using Carbon Sheets, Chen, Tong;Koyama, Shinji;Nishida, Shinichi;Yu, Lihua, 2021年, METALS, METALS, 11, 4
  • Improvement of Mechanical, Tribological, and Fricative Reduction Properties of Pure Titanium by Boriding, Chen, Tong;Koyama, Shinji;Yu, Lihua, 2021年, APPLIED SCIENCES-BASEL, APPLIED SCIENCES-BASEL, 11, 11
  • Mechanical Properties and Frictional Wear Characteristic of Pure Titanium Treated by Atmospheric Oxidation, Chen, Tong;Koyama, Shinji;Nishida, Shinichi;Yu, Lihua, 2021年, MATERIALS, MATERIALS, 14, 12
  • Fabrication of porous aluminum composites containing hollow ceramics, Yamamoto, Takaya;Hangai, Yoshihiko;Mitsugi, Hironao;Koyama, Shinji;Suzuki, Ryosuke;Matsubara, Masaaki;Fujii, Hidetoshi, 2022年, JOURNAL OF POROUS MATERIALS, JOURNAL OF POROUS MATERIALS, 29, 5, 1363, 1368
  • Low Temperature Solid-State Bonding of Nickel and Tin with Formic Acid Surface Modifications, Koyama, Shinji;Shohji, Ikuo;Muraoka, Takako, 2022年, MATERIALS TRANSACTIONS, MATERIALS TRANSACTIONS, 63, 6, 813, 820
  • Solid State Bonding of Tin and Copper by Metal Salt Generation Bonding Technique Using Citric Acid, Koyama, Shinji;Shohji, Ikuo;Muraoka, Takako, 2022年, MATERIALS TRANSACTIONS, MATERIALS TRANSACTIONS, 63, 7, 987, 992
  • Effect of Surface Modification by Aqueous NaOH Solution on Bond Strength of Solid-State Bonded Interface of Al, Koyama Shinji;Keat Ting Seng;Amari Shun;Matsubara Kouta;Shohji Ikuo, 2013年, MATERIALS TRANSACTIONS, MATERIALS TRANSACTIONS, 54, 10, 1975, 1980
  • Mechanical Properties and Frictional Wear Characteristic of Pure Titanium Treated by Atmospheric Oxidation., Chen Tong;Koyama Shinji;Nishida Shinichi;Yu Lihua, 2021年06月, Materials (Basel, Switzerland), Materials (Basel, Switzerland), 14, 12
  • Synthesis and structure of a pyridine-stabilized silanone molybdenum complex and its reactions with PMe3 and acetone, Muraoka, Takako;Suzuki, Yuzuki;Tsuchimoto, Masato;Trigagema, Gama;Ueno, Keiji;Koyama, Shinji, 2022年, DALTON TRANSACTIONS, DALTON TRANSACTIONS, 51, 47, 18203, 18212
  • Refoaming of deformed aluminum foam fabricated by precursor foaming process using remaining foaming agent and densification using friction stir welding, Hangai, Yoshihiko;Takagi, Tatsuki;Koyama, Shinji;Suzuki, Ryosuke;Kamakoshi, Yuichiroh, 2023年, MATERIALS LETTERS, MATERIALS LETTERS, 351
  • Synthesis and structure of a pyridine-stabilized silanone molybdenum complex and its reactions with PMe3 and acetone., Muraoka Takako;Suzuki Yuzuki;Tsuchimoto Masato;Trigagema Gama;Ueno Keiji;Koyama Shinji, 2022年12月, Dalton transactions (Cambridge, England : 2003), Dalton transactions (Cambridge, England : 2003), 51, 47

MISC

  • Fabrication of Aluminum Tubes Filled with Aluminum Alloy Foam by Friction Welding, Yoshihiko Hangai,Yukiko Nakano,Shinji Koyama,Osamu Kuwazuru,Soichiro Kitahara,Nobuhiro Yoshikawa, 2015年10月, MATERIALS, 8, 10, 7180, 7190
  • Cu/Cu direct bonding by metal salt generation bonding technique with organic acid and persistence of reformed layer, Shinji Koyama,Naoki Hagiwara,Ikuo Shohji, 2015年03月, JAPANESE JOURNAL OF APPLIED PHYSICS, 54, 3, 030216
  • Fabrication and Tensile Property of Sandwich Panel with ADC12 Foam Core by Friction Stir Processing Route, Takao Utsunomiya,Nobuyuki Ishii,Yoshihiko Hangai,Shinji Koyama,Soichiro Kitahara,Osamu Kuwazuru,Nobuhiro Yoshikawa, 2013年, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 77, 9, 385, 390
  • Effect of Surface Modification by Aqueous NaOH Solution on Bond Strength of Solid-State Bonded Interface of Al, Shinji Koyama,Ting Seng Keat,Shun Amari,Kouta Matsubara,Ikuo Shohji, 2013年10月, MATERIALS TRANSACTIONS, 54, 10, 1975, 1980
  • Flux less Bonding of Ni-P/Cu Plated Al Alloy and Cu Alloy with Lead-Free Sn-Cu Foil, Ikuo Shohji,Shinji Koyama,Itaru Oshiro,Hideaki Nara,Yoshiharu Iwata, 2010年10月, MATERIALS TRANSACTIONS, 51, 10, 1753, 1758
  • Effect of Formic Acid Surface Modification on Bond Strength of Solid-State Bonded Interface of Tin and Copper, Shinji Koyama,Yukinari Aoki,Ikuo Shohji, 2010年10月, MATERIALS TRANSACTIONS, 51, 10, 1759, 1763
  • Fabrication of Aluminum Foam/Dense Steel Composite by Friction Stir Welding, Yoshihiko Hangai,Shinji Koyama,Makoto Hasegawa,Takao Utsunomiya, 2010年09月, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 41A, 9, 2184, 2186
  • Fabrication and Tensile Tests of Aluminum Foam Sandwich with Dense Steel Face Sheets by Friction Stir Processing Route, Yoshihiko Hangai,Nobuyuki Ishii,Shinji Koyama,Takao Utsunomiya,Osamu Kuwazuru,Nobuhiro Yoshikawa, 2012年04月, MATERIALS TRANSACTIONS, 53, 4, 584, 587
  • Relationship between Porosity and Interface Fracture on Aluminum Foam Sandwich with Dense Steel Face Sheets Fabricated by Friction Stir Processing Route, Takao Utsunomiya,Nobuyuki Ishii,Yoshihiko Hangai,Shinji Koyama,Osamu Kuwazuru,Nobuhiro Yoshikawa, 2012年09月, MATERIALS TRANSACTIONS, 53, 9, 1674, 1679
  • Influence of surface treatment on interfacial microstructure and bond strength of diffusion-bonded tin, S Koyama,A Takahashi,K Ikeuchi, 2004年08月, SOLID STATE IONICS, 172, 1-4, 397, 401
  • Behavior of superficial oxide film at solid-state diffusion-bonded interface of tin, S Koyama,M Takahashi,K Ikeuchi, 2004年02月, MATERIALS TRANSACTIONS, 45, 2, 300, 302
  • Effect of Interfacial Hardness on Failure Modes of Liquid Phase Diffusion Bonded Sn/Sn with Bi Filler, Shinji Koyama,Issei Oya,Ikuo Shohji, 2016年, MATERIALS TRANSACTIONS, 57, 6, 810, 814
  • Functionally Graded Aluminum Foam Fabricated by Friction Powder Sintering Process with Traversing Tool, Yoshihiko Hangai,Tomoaki Morita,Shinji Koyama,Osamu Kuwazuru,Nobuhiro Yoshikawa, 2016年09月, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 25, 9, 3691, 3696
  • Fabrication of A1050-A6061 Functionally Graded Aluminum Foam by Friction Stir Processing Route, Yoshihiko Hangai,Yutaro Oba,Shinji Koyama,Takao Utsunomiya, 2011年12月, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 42A, 12, 3585, 3589
  • Reproducibility of Aluminum Foam by Combining Sintering and Dissolution Process with Precursor Foaming Process, Yoshihiko Hangai,Hayato Matsushita,Shinji Koyama,Ryosuke Suzuki,Masaaki Matsubara, 2017年07月, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A, 7, 3161, 3163
  • Foaming behavior of aluminum foam precursor induced by friction heat generated by rotating tool used for spot friction stir welding, Yoshihiko Hangai,Keisuke Takada,Ryoya Endoh,Shinji Koyama,Takao Utsunomiya, 2017年01月, JOURNAL OF MANUFACTURING PROCESSES, 25, 426, 431
  • Cutting process for aluminum foam fabricated by sintering and dissolution process, Yoshihiko Hangai,Nguyen Ngoc Minh,Tomoaki Morita,Ryosuke Suzuki,Masaaki Matsubara,Shinji Koyama, 2017年05月, ADVANCED POWDER TECHNOLOGY, 28, 5, 1426, 1429
  • Multistage Transitions of Perovskite-Type Ferroelectrics Seen with “mK-Stabilized Cells”, A. Kojima,S. Koyama,T Yoshioka,Y. Yoshimura,H. Kwasaki,K. Tozaki, 2000年, Ferroelectrics, 237, 119, 126
  • Behavior of Superficial Oxide Film in Solid-State Diffusion-Bonded of Tin and Its Influence of Bond Strength, S. Koyama,M. Takahashi,K. Ikeuchi, 2004年, Acta. Metall. Slovaca., 10, 75, 82
  • Behavior of Oxide Film in Transient-Liquid-Phase Bonding of Tin with Filler of Bismuth Film, S. Koyama,M. Takahashi,K. Ikeuchi, 2007年, Materials Science Forum, 539-543
  • Direct bonding of SUS304 stainless steel by metal salt generation bonding technique with formic acid, Shinji Koyama,Tatsunori Tsuneto, 2016年, Procedia Materials Science, 12, 95, 99
  • Solid state bonding of Al alloy/SUS304 by metal salt generation bonding technique with acetic acid, Kota Matsubara,Shinji Koyama,Hideo Nagata,Yoshiyuki Suda,Ikuo Shohji, 2014年, Advanced Materials Research, 922, 491, 496
  • A Study of the Effect of Indium Filler Metal on the Bonding Strength of Copper and Tin, Koyama\, Shinji,Seng Keat Ting,Aoki\, Yukinari,Shohji\, Ikuo, 2013年, Transactions of the Japan Institute of Electronics Packaging, 6, 1, 93, 98
  • Effect of Filler Content and Coupling Agent on Mechanical Properties of Underfill Material, Hironao Mitsugi,Shinya Kitagoh,Ikuo Shohji,Shinji Koyama, 2014年, Transactions of the Japan Institute of Electronics Packaging, 7, 25, 31
  • A study of solid state bonding strength of nonferrous metals by using metal salt generation bonding method, Shinji Koyama, 2014年, Materials Science Forum, 783-786: 2450-2455
  • 錫/錫固相接合の界面強度に及ぼすギ酸の表面改質効果, 小山真司,大屋一生, 2009年, 日本金属学会誌, 第73巻, 10号, 809, 815
  • 錫の固相圧接界面強度に及ぼす塩化水素酸によるハロゲン化処理の影響, 小山真司,川元聡, 2009年, 日本金属学会誌, 第73巻, 11号, 839, 845
  • 錫/錫固相接合界面の酸化皮膜に対する酢酸による改質効果, 小山真司,大屋一生, 2010年, 日本金属学会誌, 74, 733, 739
  • 錫/錫圧接界面強度に及ぼすフッ化水素酸によるハロゲン化処理の影響, 小山真司, 2010年, 日本機械学会論文集A編, 76, 1211, 1218
  • 炭素鋼とチタン箔の拡散接合と表面窒化同時処理の検討, 小山真司,川澄健太郎, 2010年, 日本金属学会誌, 74, 656, 661
  • SUS304ステンレス鋼のB添加溶融塩浴を用いたほう化処理に及ぼす処理温度の影響, 小山真司,福田達也,川澄健太郎,荘司郁夫, 2011年, 日本金属学会誌, 75, 684, 689
  • Behavior of Superficial Oxide Film in Solid-State Diffusion-Bonded of Tin and Its Influence of Bond Strength, S. Koyama,M. Takahashi,K. Ikeuchi, 2004年, Acta. Metall. Slovaca., 10, 75, 82
  • 錫の固相拡散接合界面の酸化皮膜に対するハロゲン化処理の効果, 小山真司,高橋誠,池内建二, 2006年, 日本金属学会誌, 70
  • Behavior of Superficial Oxide Film at Diffusion-Bonded Interface of Tin and Its Influence on Bond Strength, S. Koyama,M. Takahashi,K. Ikeuchi, 2007年, Cera. Trans., 198, 461, 466
  • Behavior of Oxide Film in Transient-Liquid-Phase Bonding of Tin with Filler of Bismuth Film, S. Koyama,M. Takahashi,K. Ikeuchi, 2007年, Materials Science Forum, 539-543
  • 摩擦攪拌法を用いたADC12-A1050傾斜機能ポーラスアルミニウムの作製, 半谷禎彦,大関雄一郎,小山真司,宇都宮登雄, 2011年, 日本機械学会論文集(A編), 77, 517, 525
  • レーザー変位法を用いた ソルダペーストぬれ性評価装置の開発, 荘司郁夫,小山真司,大屋一生,伊坂俊宏,宮本博永,西室将,平本清, 2011年, エレクトロニクス実装学会誌, 14, 390, 393
  • Sn/Ni接合界面の引張強さに及ぼすInフィラーメタルの適用効果, 小山真司,伊坂俊宏,荘司郁夫, 2011年, エレクトロニクス実装学会誌, 14, 377, 381
  • SUS304ステンレス鋼のほう化処理に及ぼす溶融塩浴中のB添加量の影響, 小山真司,高田大士,川澄健太郎,福田達也,荘司郁夫, 2011年, 日本金属学会誌, 75, 678, 683
  • Al添加溶融ほう砂浴を用いたSUS304ステンレス鋼のほう化処理に及ぼす処理温度の影響, 小山真司,川澄健太郎,福田達也,荘司郁夫, 2011年, 日本機械学会論文集(A編), 77, 1986, 1993
  • 摩擦攪拌法による発泡剤不使用ADC12ポーラスアルミニウムと緻密鋼材の複合構造部材の作製, 半谷禎彦,石井伸幸,小山真司,宇都宮登雄,北原総一郎, 2012年, 日本金属学会誌, 76, 349, 354
  • 集まれエンジニア! 金属塩生成接合法による錫の低温固相接合, 小山真司, 2012年, 溶接学会誌, 81, 154, 157
  • 錫と電極材料の拡散接合強度に及ぼすギ酸の表面改質効果, 小山真司, 2011年, 高温学会誌, 37, 169, 177
  • ろう付・はんだ付, 宮沢靖幸,小山真司, 2011年, 溶接学会誌, 80, 86, 89
  • Direct bonding of SUS304 stainless steel by metal salt generation bonding technique with formic acid, Shinji Koyama,Tatsunori Tsuneto, 2016年, Procedia Materials Science, 12, 95, 99
  • 入門教室Q&A 拡散接合 第3回 拡散接合の設備構成と接合部の評価方法, 小山真司, 2015年, 溶接技術, 63, 3, 96, 98
  • トピックス 金属塩生成接合法によるAl合金の精密固相接合, 小山真司, 2015年, 日本機械学会誌, 118, 1156, 151
  • 入門教室Q&A 拡散接合 第1回 拡散接合の歴史と拡散接合メカニズム, 小山 真司, 2015年, 溶接技術, 63, 1, 123, 125
  • Solid state bonding of Al alloy/SUS304 by metal salt generation bonding technique with acetic acid, Kota Matsubara,Shinji Koyama,Hideo Nagata,Yoshiyuki Suda,Ikuo Shohji, 2014年, Advanced Materials Research, 922, 491, 496
  • A Study of the Effect of Indium Filler Metal on the Bonding Strength of Copper and Tin, Koyama\, Shinji,Seng Keat Ting,Aoki\, Yukinari,Shohji\, Ikuo, 2013年, Transactions of the Japan Institute of Electronics Packaging, 6, 1, 93, 98
  • 金属塩の生成・分解反応による非鉄金属材料の低温接合技術, 小山真司, 2013年, ケミカルエンジニアリング, 58, 7, 50, 56
  • 「ホウ素」-超高硬度表面処理マテリアルとしての可能性について, 小山 真司, 2013年, マテリアルステージ, 142, 56, 58
  • 金属材料表面の高硬度・耐摩耗性の向上技術, 小山真司, 2015年, ケミカルエンジニアリング, 60, 2, 64, 67
  • 入門教室Q&A 拡散接合 第2回 拡散接合の種類と適用事例, 小山真司, 2015年, 溶接技術, 63, 2, 112, 114
  • Effect of Filler Content and Coupling Agent on Mechanical Properties of Underfill Material, Hironao Mitsugi,Shinya Kitagoh,Ikuo Shohji,Shinji Koyama, 2014年, Transactions of the Japan Institute of Electronics Packaging, 7, 25, 31
  • A study of solid state bonding strength of nonferrous metals by using metal salt generation bonding method, Shinji Koyama, 2014年, Materials Science Forum, 783-786: 2450-2455
  • Sn/Sn固相接合強度に対する金属塩生成接合法の適用効果, 小山真司, 2013年, スマートプロセス学会誌, 2, 1, 47, 51

書籍等出版物

  • 標準マイクロソルダリング技術 第4版, 共著, 5. 小山真司(分担), 2024年, 教科書・概説・概論
  • 金属ナノ粒子、微粒子の合成、調整と最新応用技術, 分担執筆, 小山真司(分担), 266-271, 技術情報協会, 2021年, 事典・辞書
  • マイクロ接合・実装技術, 産業技術サービスセンター, 2012年
  • 精密加工と微細構造の形成技術, 情報技術協会, 2013年
  • 機械材料学, 丸善, 2014年

講演・口頭発表等

  • 固相接合&液相接合の基礎と低温・低加圧・低電力接合技術の最新動向, 小山 真司, 技術・実務セミナー(サイエンス&テクノロジー), 2024年
  • 金属塩被膜付与インサートシートを用いた非鉄金属材料の接合, 小山 真司, 第2回界面接合研究委員会・2023年度第2回日本溶接協会先端材料接合委員会 合同委員会, 2023年
  • 拡散接合の基礎知識と低温・低加圧化に向けた最新動向, 小山 真司, 技術・実務セミナー(サイエンス&テクノロジー), 2023年09月27日
  • 輸送機器に向けた各種接合技術, 小山 真司, 日本溶射学会第117回(2023年度春季)全国講演大会, 2023年
  • ギ酸塩被膜処理を施したCu板とSn-Znはんだの接合性評価, 山﨑浩次,井上岳斗,小山真司, Mate2024, 2024年01月23日
  • 水酸化ナトリウムとギ酸を用いた金属塩生成接合法によるA5052の環境調和型真空固相接合, 滝瀬陽斗,小山真司,奥脇三男,長濱拓也,北森龍之介, Mate2024, 2024年01月23日
  • H2OインサートによるADC12アルミニウム合金の低電力抵抗溶接, 石川快,小山真司, Mate2024, 2024年01月24日
  • Effect of citric acid coating treatment of zinc insert sheet on the liquid-phase diffusion bonding strength of A5052 aluminum alloy, HUY NGUYEN QUANG, Shinji Koyama, PRICM11, 2023年11月21日
  • クエン酸塩被膜付与Znシートを用いたA5052の液相拡散接合, HUY NGUYEN QUANG,小山真司, 日本金属学会 2023年 秋期講演大会, 2023年09月20日
  • 電気アシスト接合法によるA5052/C1020の固相接合, 中居宏太,小山真司,上野正則,茂木昌己, 日本金属学会 2023年 秋期講演大会, 2023年09月20日
  • 炭酸ナトリウムとギ酸を用いた金属塩生成接合法によるA5052の環境調和型真空固相接合, 滝瀬陽斗,小山真司,奥脇三男,長濱拓也,北森龍之介, 日本金属学会 2023年 秋期講演大会, 2023年09月20日
  • A5052のジンケート処理に及ぼす表面性状の影響と液相拡散接合評価, 石倉遼平,高橋朋之, 日本金属学会 2023年 秋期講演大会, 2023年09月20日
  • 粉末ほう化法を用いた純チタンの機械的特性に及ぼすほう化処理温度の影響, 西田壮太,小山真司, 日本機械学会 2023年 年次大会, 2023年09月05日
  • 表面テクスチャ付与によるSS400のトライボロジー特性の向上, 白石健真,小山真司, 日本機械学会 2023年 年次大会, 2023年09月05日
  • 表面テクスチャ付与によるA5052/ガラス繊維強化PA66の熱圧着強度の向上, 武智正登,小山真司, シンポジウムMate2023, 2023年01月24日, 2023年, 2023年
  • 金属塩生成接合法によるA5052/SUS316Lの真空固相接合, 小山真司,鶴岡茂樹,北森龍之介,奥脇三男, シンポジウムMate2023, 2023年01月24日, 2023年, 2023年
  • 6061アルミニウム合金の接合強度に及ぼす環境調和型金属塩被膜処理の影響, 尾内茂徳,小山真司, 軽金属学会 第143回秋期大会, 2022年11月13日, 2022年, 2022年
  • 低沸点化合物挿入によるクロム鋼の低電力抵抗溶接, 石川快,小山真司, 日本機械学会 2022年度 年次大会, 2022年09月12日, 2022年, 2022年
  • A7075の液相拡散接合におけるZnシートのクエン酸塩被膜処理効果と純度の影響, 小山真司,藤森裕介, 溶接学会 2022年度秋季全国大会, 2022年09月09日, 2022年, 2022年
  • レーザアブレーション表面微細形状付与によるSPCC/ガラス繊維強化PPSの熱圧着強度の向上, 武智正登,小山真司, 溶接学会 2022年度秋季全国大会, 2022年09月09日, 2022年, 2022年
  • 表面テクスチャ付与による窒化チタンの摩擦特性向上, 小山真司,村上七海, 日本機械学会 2022年 茨城講演会, 2022年08月19日, 2022年, 2022年
  • A6061 の接合強度改善に向けた環境調和型表面改質処理, 尾内茂徳,小山真司, 日本機械学会 2022年 茨城講演会, 2022年08月19日, 2022年, 2022年
  • 低沸点化合物挿入によるアルミニウムの低電力抵抗溶接, 竹内裕也,小山真司, シンポジウムMate2022, 2022年02月03日, 2022年, 2022年
  • 電気アシスト接合法を用いたA1070/C1020固相接合における接合表面性状の影響, 山坂健登,小山真司, シンポジウムMate2022, 2022年02月03日, 2022年, 2022年
  • SS400の機械的特性に及ぼすほう化処理条件の影響, 閻斌,小山真司, 日本機械学会 群馬ブロック 研究・技術交流会2021, 2021年12月22日, 2021年, 2021年
  • Improvement of Surface Properties in Fused Salt Bath on Boriding of SKD61 Hot Work Steel, 金秋,小山真司, 日本機械学会 第29回機械材料・材料加工技術講演会, 2021年11月19日, 2021年, 2021年
  • 溶融塩浸漬法を用いた冷間工具鋼のホウ化処理におけるAl添加量の最適化, 原一真,小山真司, スマートプロセス学会 2021年度学術講演会, 2021年11月15日, 2021年, 2021年
  • クエン酸は金属の洗浄でも大活躍, 小山真司, 東北大学知の創出センター市民フォーラム「航空機を安全かつ軽量にするための材料・技術に関するおはなし」, 2022年12月19日, 2022年, 2022年
  • ギ酸塩被膜付与 Cu ナノ粒子を用いたCu 固相接合条件の緩和, 小山真司,荒井悠平, 日本銅学会 第61回講演大会, 2021年10月23日
  • 金属塩生成接合法を用いたパルスヒート援用Cu/Cu接合の検討, 鈴木宏和,小山真司,田部井由香里,谷澤秀和,岩渕昭夫, 日本銅学会 第61回講演大会, 2021年10月23日
  • ギ酸塩の生成・分解反応を利用したクロム銅の固相拡散接合, 武智正登,小山真司, 日本銅学会 第61回講演大会, 2021年10月23日
  • アルミニウムのフラックスレス液相拡散接合, 高橋朋之,小山真司,伊藤正敏,浅野隼人, 日本金属学会 2021年秋期講演大会, 2021年09月16日
  • Structures and Mechanical Properties of Pure Titanium by Different Boriding and Nitriding Conditions, T. Chen, S. Koyama, 2021 the 3rd International Conference on Advances in Materials, Mechanical and Manufacturing (AMMM 2021), 2021年09月
  • Structures and Mechanical Properties of Pure Titanium by Different Nitriding Temperatures, T. Chen, S. Koyama, 10th International Conference on Engineering and Innovative Materials (ICEIM 2021), 2021年09月
  • Wear behavior and surface hardening of titanium by nitriding, T. Chen, S. Koyama, 32th Research and development of next-generation aerospace material (Aeromat 2021), 2021年05月
  • Influence of oxidation temperature on structure and mechanical properties of Titanium, T. Chen, S. Koyama, 2021 The 5th International Conference on Material Engineering and Manufacturing(ICMEM 2021), 2021年04月, 国際会議
  • ギ酸塩被膜付与Znシートを用いたAl合金の溶体化処理温度での接合, 篠原勇人,小山真司, Mate2021, 2021年02月02日, 国内会議
  • 接合プロセス簡略化に向けたAl合金接合法の検討, 篠原勇人,小山真司, 日本機械学会群馬ブロック 研究・技術交流会2020, 2020年12月23日, 国内会議
  • FCD600/SCr420Hプロジェクション溶接部の接合強度に及ぼす組織制御の影響, 竹内裕也,小山真司, スマートプロセス学会 2020年度学術講演会, 2020年11月27日, 国内会議
  • 電気アシスト接合法を用いたA1070/C1020固相接合における通電電流の影響, 山坂健登,小山真司, スマートプロセス学会 2020年度学術講演会, 2020年11月27日, 国内会議
  • Al添加溶融塩浴を用いたほう化処理による銅タングステン電極の機械的特性向上, 田中陸,小山真司, スマートプロセス学会 2020年度学術講演会, 2020年11月27日, 国内会議
  • A5052/SUS316Lの固相接合界面特性に及ぼすギ酸塩被膜処理と接合表面性状の影響, 石川友博,小山真司,鶴岡茂樹,北森龍之介,奥脇三男, スマートプロセス学会 2020年度学術講演会, 2020年11月27日, 国内会議
  • ベリリウム銅11合金の固相接合強度に及ぼすギ酸塩被膜付与の影響, 篠原勇人,小山真司, Mate2020, 2020年01月29日, 国内会議
  • ギ酸塩被膜付与Znシートを用いたA7075合金どうしの液相拡散接合強度に及ぼすZnシート純度の影響, 篠原勇人,小山真司, 日本機械学会 関東支部 群馬ブロック研究交流会, 2019年12月06日, 国内会議
  • 金属塩生成接合法を用いた各種機械材料の複合化, 小山 真司, 複合材料懇話会, 2019年12月06日
  • ギ酸塩被膜付与Znシートを用いたA6061合金液相拡散接合継手の機械的特性に及ぼすT6処理の影響, 篠原勇人,小山真司, 日本機械学会第27回機械材料・材料加工技術講演会(M&P2019), 2019年11月22日, 国内会議
  • Creation of Functional Surfaces and Application for Joints, Shinji Koyama, Takako Muraoka, Kohei Ozawa, Symposium on the Reserch Activities of Joint Usage/Research Center on Joining and Welding, 2019年11月22日, 国際会議
  • ギ酸塩被膜付与亜鉛シートを用いたA6061合金どうしの液相拡散接合強度に及ぼす亜鉛シート純度の影響, 篠原勇人,小山真司, 軽金属学会 第137回秋期大会, 2019年11月02日, 国内会議
  • ギ酸塩被膜付与Znシートを用いたAl合金の大気中液相拡散接合強度に及ぼす接合面粗さの影響, 篠原勇人,小山真司, 日本機械学会第13回生産加工・工作機械部門講演会, 2019年10月05日, 国内会議
  • Al合金の液相拡散接合実用化に向けたZnシート表面の金属塩被膜処理条件の緩和, 篠原勇人,小山真司, 日本鋳造工学会第174回全国講演大会, 2019年09月28日, 国内会議
  • 金属塩生成接合法を用いた各種機械材料の接合条件緩和, 小山 真司, マイクロ接合研究委員会, 2019年09月20日
  • ギ酸塩被膜処理Znシートを用いたAl合金の液相拡散接合強度に及ぼす接合表面粗さの影響, 篠原勇人,小山真司, 溶接学会第105回秋季全国大会, 2019年09月18日, 国内会議
  • SUS316L/A5052の接合条件緩和に対する金属塩被膜処理効果, 石川友博,小山真司,鶴岡茂樹,北森龍之介, 日本金属学会 2019年秋期講演大会, 2019年09月12日, 国内会議
  • Al 合金の接合強度に及ぼす Zn インサート材のギ酸塩被膜付与条件の影響, 篠原勇人,小山真司, 2019年度 日本機械学会年次大会, 2019年09月09日, 国内会議
  • ギ酸塩被膜付与亜鉛シートを用いた鋳造用アルミニウム合金の液相拡散接合界面組織に及ぼす熱処理の影響, 篠原勇人,小山真司, 軽金属学会 第136回春期大会, 2019年05月11日, 国内会議
  • Al添加溶融ほう砂浴を用いたほう化処理によるSCM440鋼の機械的特性の向上, 吉田駿,小山真司, 2019年度 日本機械学会年次大会, 2019年, 国内会議
  • チタンの微細構造に及ぼす浸炭温度の影響と機械的特性評価, CHEN TONG,小山真司, 2019年度 日本機械学会年次大会, 2019年, 国内会議
  • チタンの表面特性に及ぼすほう化処理条件の影響, CHEN TONG,小山真司, 日本機械学会第13回生産加工・工作機械部門講演会, 2019年, 国内会議
  • 耐熱鋼の機械的特性向上に向けたほう化処理条件の最適化, 安澤佳希,小山真司, 日本機械学会 関東支部群馬ブロック研究交流会, 2018年12月07日, 国内会議
  • A6061/高張力鋼板の接合強度に及ぼす酢酸塩被膜厚さの影響, 小澤昂平,小山真司, 日本機械学会 関東支部群馬ブロック研究交流会, 2018年12月07日, 国内会議
  • 金属塩の生成・分解反応を用いた電子デバイスの低温接合に関する検討, 小山 真司, 電子デバイス実装研究委員会, 2018年09月05日
  • ギ酸塩被膜付与Znシートを用いたA7075の液相拡散接合, 藤森裕介,小山真司, 日本機械学会関東学生会第57回学生員卒業研究発表講演会, 2018年03月16日, 国内会議
  • 耐熱鋼の機械的特性に及ぼすほう化処理の効果, 安澤佳希,小山真司,井上雅博,西田進一, 日本金属学会2018年秋期講演大会, 2018年, 国内会議
  • 金属塩生成接合法における前処理条件がA6061/高張力鋼板の接合性に与える影響, 小澤昂平,小山真司,井上雅博,西田進一, 日本金属学会2018年秋期講演大会, 2018年, 国内会議
  • ギ酸アルミニウムの生成・分解反応がA6061/高張力鋼板の接合性に及ぼす影響, 小澤昂平,小山真司,井上雅博,西田進一, 軽金属学会関東支部 第6回若手研究者ポスター発表会, 2018年, 国内会議
  • ほう化・窒化処理がチタンの機械的・化学的特性に与える影響, 安澤佳希,小山真司,井上雅博,西田進一, 軽金属学会関東支部 第6回若手研究者ポスター発表会, 2018年, 国内会議
  • 各種有機酸を用いた金属塩被膜処理によるA6061/高張力鋼板の接合界面特性に及ぼす影響, 小澤昂平,小山真司,井上雅博,西田進一, 日本機械学会 北海道支部(2018年度)第56回講演会, 2018年, 国内会議
  • A7075の液相拡散接合強度に及ぼすZnインサート材の金属塩被膜処理効果, 藤森裕介,小山真司,西田進一,井上雅博, 日本機械学会 北海道支部(2018年度)第56回講演会, 2018年, 国内会議
  • Al添加溶融ほう砂浴を用いたSS400のほう化処理に及ぼす処理時間の影響, 川崎智恵,小山真司,井上雅博,西田進一, 日本機械学会 北海道支部(2018年度)第56回講演会, 2018年, 国内会議
  • 冷間工具鋼のほう化処理条件の最適化, 秋元直也,小山真司,井上雅博,西田進一, 日本機械学会 北海道支部(2018年度)第56回講演会, 2018年, 国内会議
  • ほう素・炭素の拡散浸透処理によるチタンの表面特性の向上, 安澤佳希,小山真司,井上雅博,西田進一, 日本機械学会 北海道支部(2018年度)第56回講演会, 2018年, 国内会議
  • 酢酸アルミニウムの生成・分解反応を利用したA6061/高張力鋼板の固相接合, 小澤昂平,小山真司,井上雅博,西田進一, 溶接学会 平成30年秋季全国大会, 2018年, 国内会議
  • ほう化処理によるインコネルの表面特性の向上, 安澤佳希,小山真司,井上雅博,西田進一, 日本機械学会2018年第26回茨城講演会, 2018年, 国内会議
  • A1070どうしの接合界面特性に及ぼす酢酸を用いた金属塩被膜付与Znシートの影響, 小澤昂平,小山真司,井上雅博,西田進一, 日本機械学会 関東支部群馬ブロック研究交流会, 2017年12月04日, 国内会議
  • チタンの表面特性に及ぼすほう化・窒化処理の効果, 安澤佳希,小山真司,井上雅博,西田進一, 日本機械学会 関東支部群馬ブロック研究交流会, 2017年12月04日, 国内会議
  • 鋳造Alどうしの接合強度に及ぼす金属塩被膜付与Znシートの影響と金属塩被膜処理効果の持続性評価, 西城舜哉,小山真司,井上雅博,西田進一, 日本機械学会 関東支部群馬ブロック研究交流会, 2017年12月04日, 国内会議
  • A6061/高張力鋼板の接合強度に及ぼす酢酸を用いた Al の金属塩被膜処理効果, 小澤昂平,小山真司,井上 雅博,西田 進一, 日本機械学会第1回機械材料・材料加工部門 若手ポスターシンポジウム, 2017年11月17日, 国内会議
  • アルミニウムの低温接合に向けた金属塩被膜付与ブレージングシートの適用, 西城 舜哉,小山 真司,井上 雅博,西田 進一, 日本機械学会第1回機械材料・材料加工部門 若手ポスターシンポジウム, 2017年11月17日, 国内会議
  • ほう化処理による冷間工具鋼の摺動特性の改善, 安澤佳希,小山真司,井上雅博,西田進一, 日本機械学会第1回機械材料・材料加工部門 若手ポスターシンポジウム, 2017年11月17日, 国内会議
  • アルミニウム部材の精密接合に向けた酢酸塩被膜付与Znシートの開発, 小澤昂平,小山真司, 次世代センサ協議会,第7回次世代センサ研究発表会, 2017年09月13日, 国内会議
  • 冷間工具鋼の機械的特性に及ぼす窒素雰囲気中での熱処理およびほう化処理の効果, 安澤佳希,小山真司,井上雅博,西田進一, 日本金属学会,秋期(第161回)講演大会, 2017年09月08日, 国内会議
  • 金属塩被膜付与Znシートを用いたAl合金の液相拡散接合と被膜処理効果の持続性評価, 西城舜哉,小山真司,井上雅博,西田進一, 日本金属学会,秋期(第161回)講演大会, 2017年09月07日, 国内会議
  • A6061/高張力鋼板の接合界面強度に及ぼすギ酸を用いた金属塩被膜処理効果, 小澤昂平,小山真司,井上雅博,西田進一, 日本金属学会,秋期(第161回)講演大会, 2017年09月07日, 国内会議
  • 固体潤滑塗膜の密着性に及ぼす下地処理の影響, 安藤怜,田中雄太,安澤佳希,小山真司, 日本金属学会,秋期(第161回)講演大会, 2017年09月07日, 国内会議
  • 固体潤滑塗膜の耐摩耗性に及ぼす機械的性質の影響, 田中雄太,安藤怜,安澤佳希,小山真司, 日本金属学会,秋期(第161回)講演大会, 2017年09月07日, 国内会議
  • チタンの耐食・耐摩耗性に及ぼすほう化・窒化処理の影響, 安澤 佳希,小山 真司,荘司 郁夫, 軽金属学会第132回春期大会, 2017年05月20日, 国内会議
  • 酢酸塩被膜付与Znシートを用いたA1070の液相拡散接合, 小澤 昂平,小山 真司,荘司 郁夫, 軽金属学会第132回春期大会, 2017年05月20日, 国内会議
  • インサート材の金属塩被膜付与条件の最適化と鋳造用Al合金の接合界面への適用, 西城舜哉,小山真司,荘司郁夫, Mate2017, 2017年02月01日, 国内会議
  • A6061/SUS316Lの固相接合強度に及ぼすギ酸を用いた金属塩生成処理の効果, 齋藤広輝,石原重憲,鶴岡茂樹,小山真司,荘司郁夫, Mate2017, 2017年01月31日, 国内会議
  • 冷間工具鋼の摩擦特性と耐摩耗性に及ぼすほう化処理の効果, 安澤佳希,小山真司, 日本機械学会2017年第25回茨城講演会, 2017年, 国内会議
  • Solid-state Bonding of 5052 Aluminum Alloy/316L Stainless Steel by Using Organic Salt, THERMEC'2016, 2016年
  • ADC12圧潰ポーラスAlの発泡挙動, 軽金属学会第130回春期大会, 2016年
  • Solid-state Bonding of 5052 Aluminum Alloy/316L Stainless Steel by Using Organic Salt, THERMEC'2016, 2016年
  • 純Al/SUS304の固相接合強度に及ぼす金属塩生成処理の効果, Mate2016「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム, 2016年
  • SUS304鋼の固相接合強度に及ぼす金属塩被膜処理効果とその持続性, Mate2016「エレクトロニクスにおけるマイクロ接合・実装技術」シンポジウム, 2016年
  • Solid-State Bonding of Ni/Ni by Using Metal Salt Generation Bonding Technique, MS&T15, 2015年
  • Solid-State Bonding of Casting Aluminum Alloy by Using Metal Salt Coated Aluminum Sheet, MS&T15, 2015年
  • ギ酸アルミニウムの生成・分解反応を利用した純Al/SUS304ステンレス鋼の固相接合, 溶接学会, 2015年
  • ギ酸を用いた金属塩生成接合法によるAC2C/ADC12の固相接合, 溶接学会, 2015年
  • SUS304鋼の直接固相接合強度に及ぼすギ酸・クエン酸を用いた金属塩被膜処理効果, 溶接学会, 2015年
  • ギ酸塩被膜付与Cu粉末を用いたCu/Cu直接固相接合, 日本金属学会, 2015年
  • ギ酸を用いた金属塩生成・電気アシスト接合法によるAC2C/ADC12の固相接合, 日本金属学会, 2015年
  • 酢酸を用いた金属塩生成接合法による純Al/SUS304の固相接合, 日本金属学会, 2015年
  • SUS304鋼の直接固相接合強度に及ぼす酢酸を用いた金属塩被膜処理効果, 日本金属学会, 2015年
  • Solid-State Bonding of Ni/Ni by Using Metal Salt Generation Bonding Technique, MS&T15, 2015年
  • クエン酸を用いた金属塩生成接合法によるSUS304ステンレス鋼の固相接合, シンポジウムMate2015, 2015年
  • ギ酸と酢酸を用いた金属塩生成接合法によるA6061合金の精密固相接合, シンポジウムMate2015, 2015年
  • 金属塩被膜付与Znシートの創製とA5052アルミニウム合金接合部への適用, シンポジウムMate2015, 2015年
  • フリップチップ接合用アンダーフィル材の密着強度と疲労特性に及ぼすカップリング剤の影響, シンポジウムMate2015, 2015年
  • 有機酸を用いた金属塩生成接合法によるTi/Alの固相接合条件の最適化, シンポジウムMate2015, 2015年
  • Solid-State Bonding of Casting Aluminum Alloy by Using Metal Salt Coated Aluminum Sheet, MS&T15, 2015年
  • ギ酸塩被膜付与Cu粉末を用いたCu/Cu直接固相接合, 日本金属学会, 2015年
  • ギ酸を用いた金属塩生成・電気アシスト接合法によるAC2C/ADC12の固相接合, 日本金属学会, 2015年
  • 酢酸を用いた金属塩生成接合法による純Al/SUS304の固相接合, 日本金属学会, 2015年
  • SUS304鋼の直接固相接合強度に及ぼす酢酸を用いた金属塩被膜処理効果, 日本金属学会, 2015年
  • Al添加溶融ほう砂浴を用いたチタンの耐摩耗性向上技術の開発, 軽金属学会, 2015年
  • 金属塩被膜付与Znシートを用いたA5052合金の低温接合, 軽金属学会, 2015年
  • Cu/Cu direct bonding by metal salt generation bonding technique with organic acid and its persistence of reformed layer, LTB-3D’2014, 2014年
  • Effect of Surface Modification by Aqueous NaOH Solution on Bond Strength of A5052 Aluminum Alloy/Al and Cu/Al, 6th International Conference, New Methods of Damage and Failure Analysis of Structural Parts, 2014年
  • Direct Bonding of A6061 Aluminum Alloy by Metal Salt Generation Bonding Technique with Formic Acid, 6th International Conference, New Methods of Damage and Failure Analysis of Structural Parts, 2014年
  • Direct Bonding of SUS304 Stainless Steel by Metal Salt Generation Bonding Technique with Formic Acid, 6th International Conference, New Methods of Damage and Failure Analysis of Structural Parts, 2014年
  • Direct Bonding of Cu/Cu by metal salt generation bonding technique with Formic Acid and Acetic Acid, 6th International Conference, New Methods of Damage and Failure Analysis of Structural Parts, 2014年
  • Effect of coupling Treatment of Filler and Copper Substrate on Adhesion of Underfill, MS&T14, 2014年
  • Direct Bonding of Ti/Al by Metal Salt Generation Bonding Technique with Formic Acid, 6th International Conference, New Methods of Damage and Failure Analysis of Structural Parts, 2014年
  • Cu/Cu direct bonding by metal salt generation bonding technique with organic acid and its persistence of reformed layer, LTB-3D’2014, 2014年
  • Effect of Surface Modification by Aqueous NaOH Solution on Bond Strength of A5052 Aluminum Alloy/Al and Cu/Al, 6th International Conference, New Methods of Damage and Failure Analysis of Structural Parts, 2014年
  • Direct Bonding of A6061 Aluminum Alloy by Metal Salt Generation Bonding Technique with Formic Acid, 6th International Conference, New Methods of Damage and Failure Analysis of Structural Parts, 2014年
  • Direct Bonding of SUS304 Stainless Steel by Metal Salt Generation Bonding Technique with Formic Acid, 6th International Conference, New Methods of Damage and Failure Analysis of Structural Parts, 2014年
  • Direct Bonding of Cu/Cu by metal salt generation bonding technique with Formic Acid and Acetic Acid, 6th International Conference, New Methods of Damage and Failure Analysis of Structural Parts, 2014年
  • Effect of coupling Treatment of Filler and Copper Substrate on Adhesion of Underfill, MS&T14, 2014年
  • 酢酸を用いた金属塩生成接合法によるAl合金/SUS304の固相接合条件の緩和, シンポジウムMate2014, 2014年
  • 金属塩生成接合法によるCu/Cu固相接合条件の緩和, シンポジウムMate2014, 2014年
  • 電気アシスト接合法によるAl/CuおよびAl/Alの固相接合, 溶接学会 マイクロ接合研究委員会, 2014年
  • フリップチップ接合用アンダーフィル材/銅の密着強度に及ぼすカップリング剤の影響, 日本金属学会, 2014年
  • ギ酸を用いた金属塩生成接合法によるA6061合金の固相接合, 日本金属学会, 2014年
  • Ti/Alのギ酸を用いた金属塩生成接合条件の最適化, 日本金属学会, 2014年
  • Direct Bonding of Ti/Al by Metal Salt Generation Bonding Technique with Formic Acid, 6th International Conference, New Methods of Damage and Failure Analysis of Structural Parts, 2014年
  • ギ酸を用いた金属塩生成接合法による高Si含有Al合金の固相接合, 日本金属学会, 2014年
  • A Study of the Effect on Indium Filler Metal on the Bonding Strength of Copper and Tin, ICEP2013, 2013年
  • Solid state bonding of Al alloy/SUS304 by metal salt generation bonding technique with acetic acid, THERMEC’2013, 2013年
  • A study of solid state bonding strength of nonferrous metals by using metal salt generation bonding method, THERMEC’2013, 2013年
  • Cu/Cu direct bonding by metal salt generation bonding technique with formic acid and citric acid, THERMEC’2013, 2013年
  • 金属塩生成接合法を用いたアルミニウムの低温固相接合, 日本溶接協会,はんだ・微細接合部会, 2013年
  • 金属塩生成接合法を用いた電子実装材料の低温固相接合, エレクトロニクス実装学会,最先端実装技術シンポジウム, 2013年
  • 非金属材料の環境にやさしい接合法, 群馬大学科学技術振興会,セミナー(ワンポイント・シリーズ), 2013年
  • A Study of the Effect on Indium Filler Metal on the Bonding Strength of Copper and Tin, ICEP2013, 2013年
  • Solid state bonding of Al alloy/SUS304 by metal salt generation bonding technique with acetic acid, THERMEC’2013, 2013年
  • A study of solid state bonding strength of nonferrous metals by using metal salt generation bonding method, THERMEC’2013, 2013年
  • フリップチップ接合用アンダーフィル材の機械的特性に及ぼすフィラー添加量と時効処理の影響, 日本金属学会, 2013年
  • 双ロール法により作製した高Al含有Mg合金の時効硬化, 日本金属学会, 2013年
  • SUS304ステンレス鋼のほう化・窒化処理とその表面特性評価, 日本金属学会, 2013年
  • 電気アシスト接合法によるAl/Cuの固相接合, 日本金属学会, 2013年
  • ギ酸を用いた金属塩生成接合法による高純度Alの接合界面特性評価, 日本金属学会, 2013年
  • 酢酸を用いた金属塩生成接合法によるCu/Cu固相接合, 日本金属学会, 2013年
  • Cu/Cu direct bonding by metal salt generation bonding technique with formic acid and citric acid, THERMEC’2013, 2013年
  • A Study of Low Temerature Solid State Bonding of Aluminum by the Metal Salt Generation Bonding Method, EAST-WJ2012, 2012年
  • Effect of Filler Content on Tensile Properties of Underfill Material for Flip Chip Bonding, IEMT2012, 2012年
  • Effect of Surface Modification by Citric Acid on Fluxless Vacuum Bonding of Cu with Sn-Cu Alloy, IEMT2012, 2012年
  • A Study of Solid State Bonding Strength of Al/Cu by Using Metal Salt Generation Bonding Method on Al Surface, Visual-JW2012, 2012年
  • A Study of Bonding Strength of Al/Cu by Metal Salt Generation Bonding Method, Visual-JW2012, 2012年
  • ADC12ポーラスアルミニウム/緻密A1050板サンドイッチパネルの作製, 塑性加工学会, 2012年
  • フリップチップ接合用アンダーフィル材の引張特性に及ぼすフィラー含有量の影響, 日本金属学会, 2012年
  • Al添加溶融塩浴を用いたS45C鋼のほう化処理と浴の耐久性評価, 日本金属学会, 2012年
  • クエン酸を用いた金属塩生成接合法によるCu/Cu固相接合, 日本金属学会, 2012年
  • ADC12ダイカストを用いたADC12ポーラスAlコアサンドイッチパネルの作製, 鋳造工学会, 2012年
  • 環境調和型低温固相接合の確立に向けた有機酸による接合表面改質技術の開発, 日本溶接協会, 2012年
  • A Study of Low Temerature Solid State Bonding of Aluminum by the Metal Salt Generation Bonding Method, EAST-WJ2012, 2012年
  • Effect of Filler Content on Tensile Properties of Underfill Material for Flip Chip Bonding, IEMT2012, 2012年
  • Effect of Surface Modification by Citric Acid on Fluxless Vacuum Bonding of Cu with Sn-Cu Alloy, IEMT2012, 2012年
  • A Study of Solid State Bonding Strength of Al/Cu by Using Metal Salt Generation Bonding Method on Al Surface, Visual-JW2012, 2012年
  • ポーラスAl/緻密鋼板サンドイッチパネルの気孔率と界面破断の関係, 日本金属学会, 2012年
  • Sn-Cu系鉛フリーはんだによるCuの真空接合におよぼすクエン酸表面処理の影響, 日本金属学会, 2012年
  • 摩擦攪拌法によるADC12ポーラスAl/A1050薄板サンドイッチパネルの作製, 日本金属学会, 2012年
  • Al/Cu固相接合強度に及ぼすNaOH水溶液の表面改質作用, 日本金属学会, 2012年
  • Al合金/SUS304のギ酸を用いた金属塩生成接合条件の最適化, 日本金属学会, 2012年
  • 金属塩生成接合法によるAlとCuの固相接合, 溶接学会, 2012年
  • ギ酸を用いた金属塩生成接合法によるAl合金/SUS304の固相接合, 溶接学会, 2012年
  • ギ酸を用いた金属塩生成接合法によるCu/Cu固相接合, 溶接学会, 2012年
  • A Study of Bonding Strength of Al/Cu by Metal Salt Generation Bonding Method, Visual-JW2012, 2012年
  • Effect of Organic Acid Surface Modification on Bond Strength of Tin and Copper, InterPACK2011, 2011年
  • 錫に対する有機酸の表面改質作用と低温接合技術への応用, 日本溶接学会, 2011年
  • Sn/Cu固相接合界面強度に及ぼすクエン酸による表面改質作用, 日本溶接学会, 2011年
  • ギ酸による表面改質法を用いた錫とニッケルの低温固相接合法の検討, 日本溶接学会, 2011年
  • 錫の酸化皮膜に対する有機酸の改質作用と固相接合強度への影響, 溶接学会 マイクロ接合研究委員会, 2011年
  • 錫に対する有機酸の表面改質作用と低温接合技術への応用, マイクロ接合研究委員会, 2011年
  • 金属塩生成法を用いたSn/Cu固相接合の低温化, 溶接学会 マイクロ接合研究委員会, 2011年
  • B添加溶融塩浸漬によるSUS304ステンレス鋼表面の硬化処理, 日本金属学会, 2011年
  • アルカリ性溶液を用いたAl/Al低温固相接合法の検討, 日本金属学会, 2011年
  • Sn/Cu固相接合強度に及ぼすクエン酸による表面改質処理と効果特性, 日本金属学会, 2011年
  • アルカリ処理によるアルミニウムと銅の直接接合法の検討, 日本金属学会, 2011年
  • 錫とニッケルのステアリン酸を用いた低温接合法の開発, 日本金属学会, 2011年
  • 表面改質処理されたアルミニウムの接合界面強度に及ぼす接合圧力の効果, 軽金属学会, 2011年
  • アルカリ処理を用いたAlとCuの固相接合強度に及ぼす接合圧力の影響, 軽金属学会, 2011年
  • Effect of Organic Acid Surface Modification on Bond Strength of Tin and Copper, InterPACK2011, 2011年
  • Development of Wettability Evaluation Equipment for Solder Paste Using Laser Displacement Method, Visual-JW2010, 2010年
  • Examination of Improvement Effect of Surface Modification of Cu with Organic Acid on Solder Paste Wettability Using a Laser Displacement Meter, Visual-JW2010, 2010年
  • Fabrication of Porous Aluminum by Friction Stir Processing Route Precursor Method and its Mechanical Properties, Aluminum Alloys, 2010年
  • 錫の固相接合強度と界面組織に及ぼす酢酸による改質効果, 溶接学会,マイクロ接合研究委員会, 2010年
  • Development of Wettability Evaluation Equipment for Solder Paste Using Laser Displacement Method, Visual-JW2010, 2010年
  • Examination of Improvement Effect of Surface Modification of Cu with Organic Acid on Solder Paste Wettability Using a Laser Displacement Meter, Visual-JW2010, 2010年
  • 溶融ほう砂浴浸漬によるSUS304ステンレス鋼表面の硬化処理, 日本金属学会, 2010年
  • ハロゲン化処理された錫の圧接界面強度に及ぼす圧接圧力の効果, 日本金属学会, 2010年
  • クエン酸を用いたSn/Snの低温固相接合法の開発, 日本金属学会, 2010年
  • 電子実装における錫と銅の環境調和型低温固相接合法の検討, 日本金属学会, 2010年
  • 錫とニッケルのフィラー金属を用いた低温接合法の開発, 日本金属学会, 2010年
  • 錫の酸化皮膜に対する有機酸の改質作用と固相接合強度への影響, 日本溶接学会, 2010年
  • Fabrication of Porous Aluminum by Friction Stir Processing Route Precursor Method and its Mechanical Properties, Aluminum Alloys, 2010年
  • 錫の固相接合界面強度に対する有機酸の表面改質効果, 溶接学会,マイクロ接合研究委員会, 2009年
  • 塩酸蒸気処理による錫/錫の低温固相圧接, 日本金属学会, 2009年
  • 錫の酸化皮膜に対するギ酸の改質作用と接合強度への影響, 溶接学会,マイクロ接合研究委員会, 2009年
  • 熱圧着法による錫の低温固相接合強度に及ぼすギ酸の表面改質効果, 日本金属学会, 2009年
  • 炭素鋼とチタン箔の拡散接合・表面窒化同時処理手法の開発, 日本金属学会, 2009年
  • 錫の固相接合界面特性に及ぼす表面性状の影響, 溶接学会 マイクロ接合研究委員会, 2008年
  • Behavior of Oxide Film in Transient-Liquid-Phase Bonding of Tin with Filler of Bismuth Film, 5th International Conference on Processing & Manufacturing of Advanced Materials (THERMEC), 2006年
  • Behavior of Superficial Oxide at Diffusion-Bonded Interface of Tin and its Influence on Bond Strength, Characterization and Control of Interfaces for High Quality Advanced Materials, 2006年
  • Effects of Surface Treatments on Oxide Film of Tin during Diffusion Bonding, Joint Symposium of Korea/Japan Welding Metallurgy Committee, 2006年
  • Behavior of Oxide Film in Transient-Liquid-Phase Bonding of Tin with Filler of Bismuth Film, 5th International Conference on Processing & Manufacturing of Advanced Materials (THERMEC), 2006年
  • Behavior of Superficial Oxide at Diffusion-Bonded Interface of Tin and its Influence on Bond Strength, Characterization and Control of Interfaces for High Quality Advanced Materials, 2006年
  • Effects of Surface Treatments on Oxide Film of Tin during Diffusion Bonding, Joint Symposium of Korea/Japan Welding Metallurgy Committee, 2006年
  • Behavior of Superficial Oxide Film at Solid-State Diffusion-Bonded Interface of Tin and its Influence on Bond Strength, 12th International Symposium on Metallography, 2004年
  • Behavior of Superficial Oxide Film at Solid-State Diffusion-Bonded Interface of Tin and its Influence on Bond Strength, 12th International Symposium on Metallography, 2004年
  • Influence of Surface Treatment on Strength on Solid-State Diffusion-Bonded Interface of Tin, 30th Anniversary International Symposium on Joining and Welding Solution to Industrial Innovation, 2003年
  • Influence of Surface Treatment on Interfacial Microstructure and Bond Strength of Diffusion-Bonded Tin, 15th International Symposium on the Reactivity of Solids, 2003年
  • Influence of Surface Treatment on Strength on Solid-State Diffusion-Bonded Interface of Tin, 30th Anniversary International Symposium on Joining and Welding Solution to Industrial Innovation, 2003年
  • Influence of Surface Treatment on Interfacial Microstructure and Bond Strength of Diffusion-Bonded Tin, 15th International Symposium on the Reactivity of Solids, 2003年

産業財産権

  • 特許権, 金属部材の接合方法, 小山 真司、馬 小娟、常藤 達礼、秋山 主、冨川 陽平, EP3238869(ドイツ:602015078437.5), 2022年04月20日, いいえ, はい, はい
  • 特許権, 金属部材の接合方法, 小山真司,馬小娟,常藤達礼,秋山主,冨川陽平, 中国特許ZL201580071149.1, 2022年04月01日, 群馬大学, 中国特許ZL201580071149.1, 2022年04月01日, はい, はい, はい
  • 特許権, 接合方法, 稲見規夫,小山真司,篠原勇人, 特願2021-142627, 2021年09月01日, トヨタ自動車株式会社,群馬大学
  • 特許権, 液相拡散接合用インサート材及び液相拡散接合方法, 稲見規夫,小山真司,篠原勇人, 特願2021-116671, 2021年07月14日, トヨタ自動車株式会社,群馬大学
  • 特許権, 金属接合方法, 藤本哲哉,小山真司, 特願2020-107147, 2020年06月22日, ジヤトコ株式会社,群馬大学
  • 特許権, 接合方法および熱交換部材, 石川貴浩,太田星,小山真司, 特願2020-010660, 2020年01月27日, 日本碍子株式会社,群馬大学
  • 特許権, チタン材の接合方法
  • 特許権, 鉄鋼材料の接合方法
  • 特許権, 金属の接合方法
  • 特許権, 金属部材の接合方法
  • 特許権, 金属の接合方法
  • 特許権, 金属の硬化処理方法
  • 特許権, 金属部材の接合方法
  • 特許権, 金属部材の接合方法
  • 特許権, 金属部材の接合方法
  • 特許権, 金属部材の接合方法
  • 特許権, 金属の硬化処理方法
  • 特許権, 金属部材の接合方法, 小山真司,馬小娟,常藤達礼,秋山主,冨川陽平, 群馬大学, 欧州特許(指定国:ドイツ)EP3238869(ドイツ:602015078437.5), 2022年04月20日, はい, はい, はい

受賞

  • 太陽誘電賞, Surf-FAB LAB(サーフファブラボ), 金属材料の表面・界面を制御する, ぐんま次世代産業創出・育成コンソーシアム, 2022年07月30日, 国内学会・会議・シンポジウム等の賞
  • 日本機械学会教育賞, 一日体験理工学教室機械の学校実施委員会, 一日体験理工学教室機械の学校, 日本機械学会, 2023年04月20日, 国内学会・会議・シンポジウム等の賞
  • Mate2023萌芽研究賞, 小山真司, 金属塩生成接合法によるA5052/SUS316Lの真空固相接合, 溶接学会 マイクロ接合研究委員会, 2023年02月03日, 国内学会・会議・シンポジウム等の賞
  • 第16回関東工学教育協会賞, 小山真司, 関東工学教育協会, 2022年05月
  • 日本機械学会関東支部群馬ブロック貢献賞, 小山真司, 日本機械学会関東支部群馬ブロック, 2021年12月
  • 横山科学技術賞, 2019年10月, その他の賞
  • 軽金属溶接協会賞, ギ酸塩被膜付与亜鉛シートを用いた鋳造用アルミニウム合金の液相拡散接合界面組織に及ぼす熱処理の影響, 軽金属溶接協会, 2019年05月, 国内学会・会議・シンポジウム等の賞
  • 軽金属溶接協会賞, 酢塩被膜付与 Zn シートを用いた A1070 の液相拡散接合, 軽金属溶接協会, 2017年05月, 国内学会・会議・シンポジウム等の賞
  • 貢献賞, 日本機械学会関東支部群馬ブロック, 2016年12月01日, 国内学会・会議・シンポジウム等の賞
  • Mate2011 研究奨励賞, 2011年

共同研究・競争的資金等の研究課題

  • 反応拡散現象による金属表面の耐食・耐摩耗性向上技術の開発, 委託研究, 2013年, 競争的資金

学術貢献活動

  • 有機/無機接合研究委員会, 学会・研究会等, スマートプロセス学会(溶接学会), 2010年04月01日, 9999年
  • 電子デバイス実装研究委員会, 学会・研究会等, スマートプロセス学会, 2013年04月, 2018年03月
  • マイクロ接合研究委員会, 学会・研究会等, 溶接学会, 2008年04月, 9999年

教育活動情報

受賞

  • 日本機械学会教育賞, 一日体験理工学教室機械の学校実施委員会, 一日体験理工学教室機械の学校, 日本機械学会, 2023年04月20日, 国内学会・会議・シンポジウム等の賞
  • 第16回 関東工学教育協会賞 業績賞, 機械の学校 実施委員, 機械の学校オンライン, 関東工学教育協会, 2022年05月24日, その他の賞

社会貢献活動情報

社会貢献活動

  • 固相接合&液相接合の基礎と低温・低加圧・低電力接合技術の最新動向, サイエンス&テクノロジー, 技術・実務セミナー(サイエンス&テクノロジー), 2024年(対象:研究者, 社会人・一般, 企業)
  • 金属塩被膜付与インサートシートを用いた非鉄金属材料の接合, 溶接学会, 第2回界面接合研究委員会・2023年度第2回日本溶接協会先端材料接合委員会 合同委員会, 2023年, 講演会(対象:教育関係者, 研究者, 社会人・一般, 学術団体, 企業)
  • 拡散接合の基礎知識と低温・低加圧化に向けた最新動向, サイエンス&テクノロジー, 技術・実務セミナー(サイエンス&テクノロジー), 2023年(対象:教育関係者, 研究者, 社会人・一般, 学術団体, 企業)
  • 輸送機器に向けた各種接合技術, 日本溶射学会, 日本溶射学会第117回(2023年度春季)全国講演大会, 2023年, 大阪, 講演会(対象:教育関係者, 研究者, 社会人・一般, 学術団体, 企業)
  • クエン酸は金属の洗浄でも大活躍, 東北大学知の創出センター, 2022年12月19日, 2022年12月19日, 東北大学(対象:大学生, 大学院生, 教育関係者, 研究者, 社会人・一般, 学術団体, 企業, 市民団体)
  • 低温実装に向けた開発動向と低温精密固相拡散接合技術の開発, 技術情報協会, 電子部品の低温実装に向けた 材料・プロセス技術, 2021年11月24日, 2021年11月24日, セミナー・ワークショップ(対象:研究者, 社会人・一般, 企業)
  • 各種材料評価技術を活用した機械材料の耐摩耗性向上・精密接合の検討, 群馬産業技術センター, 先端ものづくり産業等支援強化事業 高度分析技術研修, 2021年, 2021年(対象:研究者, 社会人・一般, 学術団体, 企業)
  • 各種アルミニウム合金のフラックスレス液相拡散接合, 溶接学会・界面接合研究委員会/日本溶接協会 先端材料接合委員会, 第118回界面接合研究委員会・2021年度第2回日本溶接協会先端材料接合委員会合同委員会, 2021年, 2021年(対象:研究者, 社会人・一般, 学術団体, 企業)
  • 第9回一日体験機械教室 機械の学校オンライン, 日本機械学会関東支部群馬ブロック・ 群馬大学大学院理工学府知能機械創製部門共催, 2020年, 2020年(対象:高校生, 保護者)
  • 模擬授業, 2019年12月11日, 2019年12月11日(対象:高校生)
  • 金属塩生成接合法を用いた各種機械材料の複合化, 北関東産官学研究会 複合材料懇話会, 2019年12月06日, 2019年12月06日(対象:大学院生, 社会人・一般, 企業)
  • 2019年11月22日, 2019年11月22日(対象:教育関係者, 研究者, 学術団体, 企業)
  • 出前授業, 群馬大学, 2019年11月19日, 2019年11月19日(対象:高校生)
  • 金属塩生成接合法を用いた各種機械材料の接合条件緩和, 一般社団法人 溶接学会マイクロ接合研究委員会, 2019年09月20日, 2019年09月20日(対象:教育関係者, 研究者, 社会人・一般, 企業)
  • 群馬ちびっこ大学, 群馬大学, 2019年, 2019年(対象:幼稚園以下, 小学生, 中学生, 高校生, 保護者, 社会人・一般)
  • メカメカフェア2019, 日本機械学会関東支部群馬ブロック, 2019年, 2019年(対象:幼稚園以下, 小学生, 中学生, 保護者)
  • 第8回一日体験機械教室 機械の学校, 日本機械学会関東支部群馬ブロック・ 群馬大学大学院理工学府知能機械創製部門共催, 2019年, 2019年(対象:高校生, 保護者)
  • 模擬授業, 2018年11月14日, 2018年11月14日(対象:高校生)
  • 金属塩の生成・分解反応を用いた電子デバイスの低温接合に関する検討, スマートプロセス学会 電子デバイス実装研究委員会, 2018年09月05日, 2018年09月05日(対象:教育関係者, 研究者, 社会人・一般, 企業)
  • メカメカフェア2018, 日本機械学会関東支部群馬ブロック, 2018年, 2018年(対象:幼稚園以下, 小学生, 中学生, 保護者)
  • 第7回一日体験機械教室 機械の学校, 日本機械学会関東支部群馬ブロック・ 群馬大学大学院理工学府知能機械創製部門共催, 2018年, 2018年(対象:高校生, 保護者)
  • メカメカフェア2017, 日本機械学会関東支部群馬ブロック, 2017年, 2017年(対象:幼稚園以下, 小学生, 中学生, 保護者)
  • 第6回一日体験機械教室 機械の学校, 日本機械学会関東支部群馬ブロック・ 群馬大学大学院理工学府知能機械創製部門共催, 2017年, 2017年(対象:高校生, 保護者)
  • メカメカフェア2016, 日本機械学会関東支部群馬ブロック, 2016年, 2016年(対象:幼稚園以下, 小学生, 中学生, 保護者)
  • 第5回一日体験機械教室 機械の学校, 日本機械学会関東支部群馬ブロック・ 群馬大学大学院理工学府知能機械創製部門共催, 2016年, 2016年(対象:高校生, 保護者)
  • 第4回一日体験機械教室 機械の学校, 日本機械学会関東支部群馬ブロック・ 群馬大学大学院理工学府知能機械創製部門共催, 2015年, 2015年(対象:高校生, 保護者)
  • メカメカフェア2015, 日本機械学会関東支部群馬ブロック, 2015年, 2015年(対象:幼稚園以下, 小学生, 中学生, 保護者)
  • メカメカフェア2014, 日本機械学会関東支部群馬ブロック, 2014年, 2014年(対象:幼稚園以下, 小学生, 中学生, 保護者)
  • メカメカフェア2013, 日本機械学会関東支部群馬ブロック, 2013年, 2013年(対象:幼稚園以下, 小学生, 中学生, 保護者)
  • メカメカフェア2012, 日本機械学会関東支部群馬ブロック, 2012年, 2012年(対象:幼稚園以下, 小学生, 中学生, 保護者)
  • メカメカフェア2011, 日本機械学会関東支部群馬ブロック, 2011年, 2011年(対象:幼稚園以下, 小学生, 中学生, 保護者)
  • 第6回群馬ちびっこ大学, 群馬大学主催, 2010年, 2010年(対象:幼稚園以下, 小学生, 中学生, 高校生, 保護者, 社会人・一般)
  • メカメカフェア2010, 日本機械学会関東支部群馬ブロック, 2010年, 2010年(対象:幼稚園以下, 小学生, 中学生, 保護者)
  • メカメカフェア2009, 日本機械学会関東支部群馬ブロック, 2009年, 2009年(対象:幼稚園以下, 小学生, 中学生, 保護者)
  • メカメカフェア2008, 日本機械学会関東支部群馬ブロック, 2008年, 2008年(対象:幼稚園以下, 小学生, 中学生, 保護者)
  • 第10回一日体験機械教室 機械の学校オンライン, 日本機械学会関東支部群馬ブロック・ 群馬大学大学院理工学府知能機械創製部門共催, 2021年, 2021年(対象:高校生, 保護者)

学術貢献活動

  • 日本機械学会 関東支部 群馬ブロック 商議員, 学会・研究会等, 日本機械学会 関東支部 群馬ブロック, 2021年, 2022年
  • 日本機械学会 関東支部 表彰担当幹事, 学会・研究会等, 日本機械学会 関東支部, 2021年, 2023年
  • 日本金属学会会誌編集委員会・欧文誌編集委員会査読委員, 査読等, 日本金属学会, 2020年04月24日, 2024年04月30日
  • 溶接学会編集委員会 委員, 査読等, 溶接学会, 2018年, 9999年
  • 日本機械学会関東支部群馬ブロック 幹事, 学会・研究会等, 日本機械学会, 2017年, 2018年
  • 電子デバイス実装研究委員会 幹事, 学会・研究会等, スマートプロセス学会, 2013年, 2018年
  • 有機/無機接合研究委員会 幹事, 学会・研究会等, スマートプロセス学会(溶接学会), 2010年, 9999年
  • マイクロ接合研究委員会 副委員長, 学会・研究会等, 溶接学会, 2010年, 9999年
  • シンポジウムMate 実行委員会副委員長, 大会・シンポジウム等, 溶接学会, 2008年, 9999年
  • 日本機械学会 関東支部 群馬ブロック 商議員, 学会・研究会等, 日本機械学会 関東支部 群馬ブロック, 2022年, 2023年

メディア報道

  • 表面創製技術で叶えるものづくり, 本人, 読売新聞鹿児島広告社, 読売新聞鹿児島県版, 2023年02月27日, 新聞・雑誌


Copyright © MEDIA FUSION Co.,Ltd. All rights reserved.