研究者データベース

西田 進一
ニシダ シンイチ
知能機械創製部門
助教
Last Updated :2022/04/08

研究者基本情報

研究者

  • 氏名

    西田 進一, ニシダ シンイチ

基本情報

  • 研究者氏名(日本語)

    西田, 進一
  • 研究者氏名(カナ)

    ニシダ, シンイチ
  • プロフィール

    2011年4月 群馬大学大学院工学研究科 助教

論文上での記載著者名

  • S. Nishida
  • S. Nishida

使用外国語

  • 発表に使用する外国語

    英語
  • 執筆に使用する外国語

    英語

所属

  • 群馬大学, 大学院理工学府 知能機械創製部門, 助教
  • 群馬大学, 大学院理工学府 知能機械創製部門, 助教

学歴

  • 2003年04月, 2008年03月, 早稲田大学, 大学院理工学研究科, 機械工学専攻
  • 1999年04月, 2003年03月, 早稲田大学, 理工学部, 機械工学科

学位

  • 博士(工学)
  • 博士(工学)

所属学協会

  • 軽金属学会
  • 日本塑性加工学会
  • 日本機械学会

経歴

  • 2011年04月, 9999年, 群馬大学, 助教, 助教相当
  • 2009年04月, 2011年03月, 早稲田大学 助教
  • 2005年04月, 2009年03月, 早稲田大学 助手

研究活動情報

研究分野

  • ものづくり技術(機械・電気電子・化学工学), 加工学、生産工学

研究キーワード

  • 半溶融半凝固加工
  • マグネシウム合金
  • アルミニウム合金
  • 薄板連続鋳造
  • 塑性加工

研究テーマ

  • マグネシウム合金やアルミニウム合金の薄板連続鋳造,および塑性加工に関する研究, マグネシウム合金,アルミニウム合金,薄板連続鋳造,塑性加工, 機関内共同研究, 2011, 2016, 生産工学・加工学, 科学研究費補助金

論文

  • 軽合金板用半連続鋳造機の提案, 羽賀俊雄; 宮崎圭司; 土田真帆; 西田進一; 渡利久規, 2018年10月, 塑性と加工, 59, 693, 189, 194, 研究論文(学術雑誌)
  • Horizontal Twin Roll Strip Casting of Aluminum Alloy A7075, Yuta Kashitani; Shinichi Nishida; Junshi Ichikawa; Kentaro Tsunoda; Yuto Horigome; Yujiro Nitta; Hideto Harada, 2018年10月, Nanotechnology & Applications, Nanotechnology & Applications, 1, 2, 1, 3, 研究論文(学術雑誌)
  • Dynamic Analyses of Damping Alloy Sleeves for Boring, Yuto Horigome; Fumihito Sakurai; Shinichi Nishida, 2018年10月, Nanotechnology & Applications, Nanotechnology & Applications, 1, 2, 1, 4, 研究論文(学術雑誌)
  • Cold Plastic Forming of ABS Plastic Pipe, Kentaro Tsunoda; Shinichi Nishida; Junshi Ichikawa; Yuta Kashitani; Yuto Horigome; Naoki Ikeda; Hideto Harada; Nobuyuki Kamei, 2018年10月, Nanotechnology & Applications, Nanotechnology & Applications, 1, 2, 1, 4, 研究論文(学術雑誌)
  • FEM Analysis for Burring Process of Large Diameter SUS304 Tube, Junshi Ichikawa; Shinichi Nishida; Yuta Kashitani; Kentaro Tsunoda; Yuto Horigome; Naoki Ikeda; Yutaka Sato, 2018年10月, Nanotechnology & Applications, Nanotechnology & Applications, 1, 2, 1, 4, 研究論文(学術雑誌)
  • Prevention of solidification of Al-40%Sn-1%Cu in melt pool on the roll casting using unequal diameter twin roll caster, Toshio Haga; Ryusuke Onishi; Hisaki Watari; Shinichi Nishida, 2018年, Defect and Diffusion Forum, 382 DDF, 160, 166, 研究論文(国際会議プロシーディングス)
  • FEM analysis of cold flaring process of SUS304 pipe, Shinichi Nishida; Junshi Ichikawa; Yuta Kashitani; Kentaro Tsunoda; Yusuke Takeuchi; Yujiro Nitta; Yuto Takigawa; Atsuhiro Aoki; Yutaka Sato, 2018年, Defect and Diffusion Forum, 382 DDF, 120, 126, 研究論文(国際会議プロシーディングス)
  • Roll casting of Al-40%Sn-1%Cu Strip, Toshio Haga; Ryusuke Onishi; Hisaki Watari; Shinichi Nishida, 2018年, Defect and Diffusion Forum, 382 DDF, 147, 154, 研究論文(国際会議プロシーディングス)
  • Casting of an Mg alloy clad strip using a twin roll caster equipped with a scraper, Toshio Haga; Kentaro Okamura; Shinichi Nishida; Hisaki Watari; Kunio Matsuzaki, 2017年, Materials Science Forum, 879, 671, 676, 研究論文(国際会議プロシーディングス)
  • Direct molten metal rolling of aluminum alloy A3003, Hiroto Ohashi; Shinichi Nishida; Yuta Kashitani; Junshi Ichikawa; Nao Ozawa; Tomoya Suzuki; Ryosuke Okushima; Atsuhiro Aoki; Hideto Harada, 2017年, Key Engineering Materials, 735, 13, 17, 研究論文(国際会議プロシーディングス)
  • Twin roll casting of aluminium alloy ADC12, A3003, A7075, Yuta Kashitani; Shinichi Nishida; Junshi Ichikawa; Hiroto Ohashi; Nao Ozawa; Ryosuke Okushima; Tomoya Suzuki; Yuto Takigawa; Hideto Harada, 2017年, Key Engineering Materials, 735, 18, 23, 研究論文(国際会議プロシーディングス)
  • Semisolid strip casting of aluminum alloy by a twin roll caster equipped with a channel scraper, Toshio Haga; Shinichi Nishida; Hisaki Watari, 2017年, Key Engineering Materials, 748 KEM, 181, 186, 研究論文(国際会議プロシーディングス)
  • Casting of clad strip of AL-SiCp, magnesium alloy hard-brittle light material by a twin roll caster, Toshio Haga; Kentaro Okamura; Hisaki Watari; Shinichi Nishida, 2017年, Materials Science Forum, 893 MSF, 262, 266, 研究論文(国際会議プロシーディングス)
  • Evaluation of friction properties of magnesium alloy during hot forging by ring compression test, Sueji Hirawatari; Hisaki Watari; Shinichi Nishida; Yuki Sato; Mayumi Suzuki, 2017年, Materials Science Forum, 889, 119, 126, 研究論文(国際会議プロシーディングス)
  • Simulation of forming prediction for 5000 series aluminum alloy using finite element analysis, Shinichi Nishida; Ryosuke Kurihara; Ryosuke Okushima; Masaru Fujita; Hayato Aso; Yoshitaka Sato, 2015年, Keikinzoku/Journal of Japan Institute of Light Metals, 65, 11, 578, 581, 研究論文(学術雑誌)
  • Friction characteristics in press forming of 5000 series aluminum alloy sheet, Shinichi Nishida; Ryosuke Kurihara; Ryosuke Okushima; Hayato Aso; Yoshitaka Sato; Masaru Fujita, 2015年, Keikinzoku/Journal of Japan Institute of Light Metals, 65, 11, 573, 577, 研究論文(学術雑誌)
  • Development of wall thickening method during die forming of pipes, Dohi M; Kamiyama H; Nishida S.-I; Watari H; Kotani Y, 2014年, AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications, AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications, 23, 28
  • Twin roll casting and formability of Al-25%Si Alloy strip, Hideto Harada; Toshio Haga; Shinichi Nishida; Hisaki Watari, 2013年, Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 79, 804, 1142, 1146, 研究論文(国際会議プロシーディングス)
  • Fabrication of Al/Mg clad material using a horizontal tandem twin roll caster, Hideto Harada; Masaki Endo; Shinichi Nishida; Hisaki Watari; Toshio Haga, 2013年, Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 79, 804, 1147, 1151, 研究論文(国際会議プロシーディングス)
  • Solidification heat transfer analysis of AZ91D cast strip by using a horizontal twin roll caster, Harada H; Nagumo T; Endo M; Nishida S; Watari H; Haga T, 2013年, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8, 3, 2627, 2634
  • Manufacture of AZ31 magnesium alloy circular tubes by cold roll forming, Kanai S; Nishida S.-I; Watari H, 2013年, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8, 3, 2543, 2547
  • Production of copper alloy sheet by twin-roll casting, Kano T; Harada H; Nishida S; Watari H, 2013年, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8, 3, 2587, 2591
  • Interfacial properties of honeycomb sandwich panel produced by melt drag process, Nishida S; Kano T; Harada H; Wataril H, 2013年, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8, 3, 2515, 2521
  • FEM analysis of pipe reduction forming process for increasing of wall thickness, Kawabata D; Kamiyama H; Nishida S; Watari H, 2013年, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8, 3, 2503, 2507
  • Conical cup properties at room temperature of AZ31 magnesium alloy sheet produced by melt drag process, Shinichi Nishida; Mitsugu Motomura, 2010年, Keikinzoku/Journal of Japan Institute of Light Metals, 60, 10, 477, 481, 研究論文(学術雑誌)
  • Effect of shield gases and Ca addition on production of AZ31 magnesium alloy sheet by melt drag process, Shinichi Nishida; Mitsugu Motomura, 2010年, Keikinzoku/Journal of Japan Institute of Light Metals, 60, 10, 482, 485, 研究論文(学術雑誌)
  • Effect of forming roll on production of AZ31 magnesium alloy sheet by melt drag process, Shinichi Nishida; Mitsugu Motomura, 2010年, Keikinzoku/Journal of Japan Institute of Light Metals, 60, 9, 421, 426, 研究論文(学術雑誌)
  • Grain refinement of AZ31 magnesium alloy sheet produced by melt drag process with super heat treatment, Shinichi Nishida; Mitsugu Motomura, 2010年, Keikinzoku/Journal of Japan Institute of Light Metals, 60, 12, 625, 628, 研究論文(学術雑誌)
  • Estimation of heat transfer coefficient and temperature transition on melt drag process of AZ31 magnesium alloy by heat transfer and solidification analysis, Shinichi Nishida; Mitsugu Motomura, 2008年09月, Keikinzoku/Journal of Japan Institute of Light Metals, 58, 9, 439, 442, 研究論文(学術雑誌)
  • Effects of fundamental process factors on the properties of AZ31 magnesium alloy strip produced by the melt drag process, Shinichi Nishida; Mitsugu Motomura, 2007年10月, Keikinzoku/Journal of Japan Institute of Light Metals, 57, 10, 439, 443, 研究論文(学術雑誌)
  • Strip casting of AZ31 magnesium alloy by the melt drag process equipped with a forming belt, Shinichi Nishida; Mitsugu Motomura, 2006年10月, Keikinzoku/Journal of Japan Institute of Light Metals, 56, 10, 509, 513, 研究論文(学術雑誌)
  • Strip casting of pure magnesium and an AZ31 magnesium alloy by the melt drag process, Shinichi Nishida; Mitsugu Motomura, 2005年07月, Keikinzoku/Journal of Japan Institute of Light Metals, 55, 7, 315, 320, 研究論文(学術雑誌)
  • Burring process and fracture criterion of large diameter steel pipe, Shinichi Nishida; Daichi Uematsu; Naoki Ikeda; Kyohei Ogawa; Makoto Hagiwara; Yutaka Sato, 2020年, Key Engineering Materials, 846 KEM, 139, 145, 研究論文(国際会議プロシーディングス)
  • Semi-solid forging of mg alloy azx1311 and mechanical properties, Shinichi Nishida; Makoto Hagiwara; Kentaro Tsunoda; Ryoma Nakanishi; Tatsuya Tanaka; Toshio Haga, 2020年, Key Engineering Materials, 846 KEM, 72, 76, 研究論文(国際会議プロシーディングス)
  • Roll casting and die casting of si-added al-mg alloy, Toshio Haga; Shinichiro Imamura; Hiroshi Fuse; Hisaki Watari; Shinichi Nishida, 2020年, Materials Science Forum, 1007 MSF, 12, 17, 研究論文(国際会議プロシーディングス)
  • Globular crystals in the center of roll cast aluminum alloy strips, Toshio Haga; Maho Tsuchida; Hirotaka Sakata; Hisaki Warari; Shinichi Nishida, 2020年, Materials Science Forum, 1007 MSF, 34, 40, 研究論文(国際会議プロシーディングス)
  • Changing from a vertical burr to a horizontal burr in the vertical-type high-speed twin-roll caster, Toshio Haga; Yushi Murakami; Shou Kitamura; Hisaki Watari; Shinichi Nishida, 2020年, Materials Science Forum, 1007 MSF, 29, 33, 研究論文(国際会議プロシーディングス)
  • Casting of bar using a twin wheel caster, Toshio Haga; Kohei Tuchitani; Hisaki Warari; Shinichi Nishida, 2020年, Key Engineering Materials, 831 KEM, 46, 51, 研究論文(国際会議プロシーディングス)
  • Burr formation in casting using vertical-type high-speed twin-roll caster, Toshio Haga; Takuya Yamashiki; Hisaki Watari; Shinichi Nishida, 2020年, Key Engineering Materials, 846 KEM, 146, 151, 研究論文(国際会議プロシーディングス)
  • Casting of thin bare wire using wheel caster equipped with rotating side-dam plates, Toshio Haga; Kirito Itou; Hisaki Watari; Shinichi Nishida, 2020年, Key Engineering Materials, 846 KEM, 152, 156, 研究論文(国際会議プロシーディングス)
  • Reduction of surface cracks at al-mg alloy strip surface cast by unequal diameter twin roll caster, Toshio Haga; Kazuki Yamazaki; Hisaki Watari; Shinichi Nishida, 2020年, Materials Science Forum, 1007 MSF, 6, 11, 研究論文(国際会議プロシーディングス)
  • Hot forging of roll-cast magnesium alloys with high aluminum content, Sueji Hirawatari; Hisaki Watari; Shiichi Nishida; Mayumi Suzuki; Toshio Haga, 2018年, Key Engineering Materials, 789, 187, 194, 研究論文(学術雑誌)
  • Three-layer clad strip casting using a vertical type tandem twin roll caster, Toshio Haga; Kentaro Okamura; Hisaki Warari; Shinichi Nishida, 2018年, Key Engineering Materials, 773 KEM, 171, 178, 研究論文(国際会議プロシーディングス)
  • Effect of base strip temperature on bonding of three-layer clad strip cast by a vertical-type tandem twin roll caster, Toshio Haga; Kentaro Okamura; Hisaki Warari; Shinichi Nishida, 2018年, Key Engineering Materials, 792, 8, 15, 研究論文(学術雑誌)
  • Plastic deformation simulation of sintered ferrous material in cold-forging process, Yuki Morokuma; Shinichi Nishida; Yuichiro Kamakoshi; Koshi Kanbe; Tatsuya Kobayashi; Ikuo Shohji, 2018年, Materials Science Forum, 941 MSF, 552, 557, 研究論文(国際会議プロシーディングス)

MISC

  • Production Magnesium Alloy Strip with Boss and Rib Section by Melt Drag Process and Experimental Conditions, Shinichi Nishida; Kazuki Fukudome; J. Kudo; M. Motomura, 2010年, PRICM 7, PTS 1-3, 654-656, 1468, +
  • Production Magnesium Alloy Strip with Boss and Rib Section by Melt Drag Process and Experimental Conditions, Shinichi Nishida; Kazuki Fukudome; J. Kudo; M. Motomura, 2010年, PRICM 7, PTS 1-3, 654-656, 1468, +
  • Improvement of Surface Roughness of Al-Si Alloy Cast Strip by Vertical Melt Drag Process, Nishida Shinichi; Fukudome Kazuki; H. Furusawa; M. Motomura; H. Watari, 2012年, MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-8, 383-390, 3954, +
  • Improvement of Surface Roughness of Al-Si Alloy Cast Strip by Vertical Melt Drag Process, Nishida Shinichi; Fukudome Kazuki; H. Furusawa; M. Motomura; H. Watari, 2012年, MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-8, 383-390, 3954, +
  • Producing Aluminum Foam Sandwich Panel by Melt Drag Process, Shinichi Nishida; Hiroto Tanaka; M. Adachi; M. Motomura, 2012年, THERMEC 2011, PTS 1-4, 706-709, 367, +
  • Producing Aluminum Foam Sandwich Panel by Melt Drag Process, Shinichi Nishida; Hiroto Tanaka; M. Adachi; M. Motomura, 2012年, THERMEC 2011, PTS 1-4, 706-709, 367, +
  • A 3D Finite Element Simulation of Cold Roll Forming of Wrought Magnesium Alloy Sheets, HisakiWatari; HidemitsuHamano; Shi-ichiNishida; Hayato Asou, 2014年, APPLIED MECHANICS AND MECHANICAL ENGINEERING IV, 459, 2, 455, +
  • A 3D Finite Element Simulation of Cold Roll Forming of Wrought Magnesium Alloy Sheets, HisakiWatari; HidemitsuHamano; Shi-ichiNishida; Hayato Asou, 2014年, APPLIED MECHANICS AND MECHANICAL ENGINEERING IV, 459, 2, 455, +
  • Casting of High-Aluminum-Content Mg Alloys Strip by a Horizontal Twin-Roll Caster, Hideto Harada; Shinichi Nishida; Endo Masaki; Hisaki Watari, 2014年04月, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 45, 2, 427, 437
  • Casting of High-Aluminum-Content Mg Alloys Strip by a Horizontal Twin-Roll Caster, Hideto Harada; Shinichi Nishida; Endo Masaki; Hisaki Watari, 2014年04月, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 45, 2, 427, 437
  • AZ31マグネシウム合金のメルトドラッグ法への過熱処理の適用と結晶粒の微細化, 西田進一; 本村貢, 2010年, 軽金属, Keikinzoku/Journal of Japan Institute of Light Metals, 60, 12, 625, 628
  • メルトドラッグ法によるAZ31マグネシウム合金薄板作製における保護ガスとCa添加の影響, 西田進一; 本村貢, 2010年, 軽金属, Keikinzoku/Journal of Japan Institute of Light Metals, 60, 10, 482, 485
  • メルトドラッグ法によって作製したAZ31マグネシウム合金板の冷間コニカルカップ特性, Shinichi Nishida; Mitsugu Motomura, 2010年, 軽金属, Keikinzoku/Journal of Japan Institute of Light Metals, 60, 10, 477, 481
  • メルトドラッグ法によるAZ31マグネシウム合金薄板作製における成形ロールの効果, 西田進一; 本村貢, 2010年, 軽金属, Keikinzoku/Journal of Japan Institute of Light Metals, 60, 9, 421, 426
  • 伝熱凝固解析を用いたAZ31マグネシウム合金のメルトドラッグ法における熱伝達係数と温度遷移の推定, 西田進一; 本村貢, 2008年09月, 軽金属, Keikinzoku/Journal of Japan Institute of Light Metals, 58, 9, 439, 442
  • Producing aluminum honeycomb sandwich panel by melt drag process, Shinichi Nishida; Tatsuhiro Kano; Hideto Harada; Takayuki Nagumo; Hisaki Watari, 2012年, WASET, 63, 1, 5, 8
  • メルトドラッグ法によるAZ31マグネシウム合金薄板の特性に及ぼす基礎的なプロセス因子の影響, 西田進一; 本村貢, 2007年10月, 軽金属, Keikinzoku/Journal of Japan Institute of Light Metals, 57, 10, 439, 443
  • 成形ベルトを付加したメルトドラッグ法によるAZ31マグネシウム合金のストリップキャスティング, 西田進一; 本村貢, 2006年10月, 軽金属, Keikinzoku/Journal of Japan Institute of Light Metals, 56, 10, 509, 513
  • メルトドラッグ法による純マグネシウムとAZ31合金のストリップキャスティング, 西田進一; 本村貢, 2005年07月, 軽金属, Keikinzoku/Journal of Japan Institute of Light Metals, 55, 7, 315, 320
  • 横型タンデム双ロールキャスターによるAl/Mgクラッド材の製造, 原田英人; 遠藤正樹; 中村慎; 西田進一; 渡利久規; 羽賀俊雄, 2012年, 日本機械学会論文集(A特), 79, 1147, 1151
  • 横型タンデム双ロールキャスターによるAl/Mgクラッド材の製造, 原田英人; 遠藤正樹; 中村慎; 西田進一; 渡利久規; 羽賀俊雄, 2013年, 日本機械学会論文集(A特), Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 79, 804, 1147, 1151
  • 有限要素解析による5000系アルミニウム合金の成形予測シミュレーション, 西田進一; 栗原亮典; 奥島綾介; 藤田大; 麻生逸人; 佐藤由貴, 2015年, 軽金属, Keikinzoku/Journal of Japan Institute of Light Metals, 65, 11, 578, 581
  • 5000系アルミニウム合金のプレス成形における摩擦特性, 西田進一; 栗原亮典; 奥島綾介; 麻生逸人; 佐藤由貴; 藤田大, 2015年, 軽金属, Keikinzoku/Journal of Japan Institute of Light Metals, 65, 11, 573, 577
  • Finite element method analysis in uniaxial die forming of thick walled pipe with back pressure, Hirotaka Kamiyama; Shinichi Nishida; Ryosuke Kurihara; Masaru Fujita, 2015年, International Journal of Engineering Research and Development, 11, 1, 41, 45
  • Production and interfacial properties of honeycomb sandwich panel produced by melt drag process, Shinichi Nishida; Yuki Akaike; Hideto Harada; Hisaki Watari, 2015年, International Journal of Mechanical and Production Engineering, 3, 1, 40, 42
  • Production of copper alloy sheet by twin roll casting, Shinichi Nishida; Fumiya Yamano; Hideto Harada; Hisaki Watari, 2015年, International Journal of Mechanical and Production Engineering, 3, 1, 36, 39
  • Manufacture of AZ31 magnesium alloy circular tubes by cold roll forming, Shinichi Nishida; Hayato Aso; Xu Wenqiang; Hisaki Watari, 2015年, International Journal of Mechanical and Production Engineering, 3, 1, 5-8.
  • Forming limit prediction of high tensile strength steel using FEA simulation, Ryosuke Kurihara; Shinichi Nishida; Hirotaka Kamiyama; Yuki Akaike, 2015年, International Journal of Engineering Research and Development, 11, 1, 46, 50
  • Direct cladding from molten metals of aluminum and magnesium alloys by using a tandem horizontal twin roll caster, Hideto Harada; Shinichi Nishida; Mayumi Suzuki; Hisaki Watari; Toshio Haga, 2015年, Applied Mechanics and Materials, 772, 1, 250, 256
  • Manufacturing method of increasing hollow steel shaft thickness using uniaxial pressing, Masahiro Dohi; Hirotaka Kamiyama; Shinichi Nishida; Hisaki Watari, 2014年, Applied Mechanics and Materials, 705, 1, 44, 50
  • Thickness increasing characteristics of steel pipe during die forming, Masahiro Dohi; Hirotaka Kamiyama; Shin-Ichi Nishida; Hisaki Watari, 2014年, Applied Mechanics and Materials, 575, 2, 276, 281
  • Cold roll forming of circular tube section for wrought magnesium alloy sheets, Hisaki Watari; Hidemitsu Hamano; Shin-ich Nishida; Shun-suke Kanai, 2013年, International Journal of Mining, Metallurgy Engineering, 1, 5, 313, 317
  • 横型タンデム双ロールキャスターによるAl/Mgクラッド材の製造, 原田英人; 遠藤正樹; 中村慎; 西田進一; 渡利久規; 羽賀俊雄, 2013年, 日本機械学会論文集(A特), Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 79, 804, 1147, 1151
  • Al-25%Si合金薄板の双ロールキャスティングと加工性, 原田英人; 羽賀俊雄; 西田進一; 渡利久規, 2013年, 日本機械学会論文集(A特), Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 79, 804, 1142, 1146
  • Casting of an Mg Alloy Clad Strip Using a Twin Roll Caster Equipped with a Scraper, Toshio Haga; Kentaro Okamura; Shinichi Nishida; Hisaki Watari; Kunio Matsuzaki, 2016年, Materials Science Forum, 879, 671, 676
  • Casting of Clad Strip of Al-SiCp, Magnesium Alloy Hard-Brittle Light Material by a Twin Roll Caster, Toshio HAGA; Kentaro OKAMURA; Hisaki WATARI; Shinichi NISHIDA, 2016年, Materials Science Forum, 879, 262, 266
  • FEM Analysis of Cold Flaring Process of SGP Pipe, Ryosuke Okushima; Shinichi Nishida; Junshi Ichikawa; Yuta Kashitani; Yujiro Nitta; Atsuhiro Aoki; Yuto akigawa; Hayato Aso; Hideto Harada; Akihiro Watanabe, 2017年, International Journal of Advanced Engineering, Management and Science, 3, 2, 75, 76
  • Forgeability of AZ Series Magnesium Alloy produced by Twin Roll Casting, Nao Ozawa; Shinichi Nishida; Toshio Haga; Junshi Ichikawa; Yuta Kashitani; Ryosuke Okushima; Yujiro Nitta; Atsuhiro Aoki; Yuto Takigawa; Hayato Aso; Hideto Harada; Akihiro Watanabe, 2017年, International Journal of Advanced Engineering, Management and Science, 3, 2, 77, 80
  • Evaluation of friction properties of magnesium alloy during hot forging by ring compression test, Sueji Hirawatari; Hisaki Watari; Shinichi Nishida; Yuki Sato; Mayumi Suzuki, 2017年, Materials Science Forum, 889, 119, 126
  • Direct molten metal rolling of aluminum alloy A3003, Hiroto Ohashi; Shinichi Nishida; Yuta Kashitani; Junshi Ichikawa; Nao Ozawa; Tomoya Suzuki; Ryosuke Okushima; Atsuhiro Aoki; Hideto Harada, 2017年, Key Engineering Materials, 735, 13, 17
  • Twin roll casting of aluminium alloy ADC12, A3003, A7075, Yuta Kashitani; Shinichi Nishida; Junshi Ichikawa; Hiroto Ohashi; Nao Ozawa; Ryosuke Okushima; Tomoya Suzuki; Yuto Takigawa; Hideto Harada, 2017年, Key Engineering Materials, 735, 18, 23
  • Magnesium Alloy Hard-Brittle Light Material by a Twin Roll Caster, T. Haga; K. Okamura; H. Watari; S. Nishida, 2017年, Materials Science Forum, 893, 262, 266
  • Casting of aluminum alloy clad strip by an unequal diameter twin-roll caster equipped with a scraper, Toshio Haga; Ryosuke Kozono; Shinichi Nishida; Hisaki Watari, 2017年10月02日, Advances in Materials and Processing Technologies, 3, 4, 511, 521
  • Finite element method analysis of cold forging for deformation and densification of Mo alloyed sintered steel, Y. Kamakoshi; S. Nishida; K. Kanbe; I. Shohji, 2017年11月01日, IOP Conference Series: Materials Science and Engineering, 257, 1, 12012
  • FEM analysis of cold flaring process of SUS304 pipe, Shinichi Nishida; Junshi Ichikawa; Yuta Kashitani; Kentaro Tsunoda; Yusuke Takeuchi; Yujiro Nitta; Yuto Takigawa; Atsuhiro Aoki; Yutaka Sato, 2018年, Defect and Diffusion Forum, 382, 120, 126
  • 年間展望 半溶融・半凝固加工, 西田進一, 2013年, 塑性と加工, 54, 631, 40, 44
  • 年間展望 半溶融・半凝固加工, 西田進一, 2014年, 塑性と加工, 55, 643, 39, 43
  • 年間展望 半溶融・半凝固加工, 西田進一, 2015年, 塑性と加工, 56, 655, 42, 46
  • 年間展望 半溶融・半凝固加工, 西田進一, 2016年, 塑性と加工, 57, 668, 32, 36
  • 年間展望 半溶融・半凝固加工, 西田進一, 2017年, 塑性と加工, 58, 680, 761, 764
  • マグネシウム合金の熱間鍛造の可能性, 渡利久規; 西田進一; 鈴木真由美; 羽賀俊雄, 2016年, アルトピア, 2, 16, 23
  • 半溶融・半凝固加工のこれまでとこれから, 羽賀俊雄; 西田進一, 2018年, 塑性と加工, 1, 1, 39, 53
  • Producing aluminum honeycomb sandwich panel by melt drag process, Shinichi Nishida; Tatsuhiro Kano; Hideto Harada; Takayuki Nagumo; Hisaki Watari, 2012年, WASET, 63, 1, 5, 8
  • Finite element method analysis in uniaxial die forming of thick walled pipe with back pressure, Hirotaka Kamiyama; Shinichi Nishida; Ryosuke Kurihara; Masaru Fujita, 2015年, International Journal of Engineering Research and Development, 11, 1, 41, 45
  • Production and interfacial properties of honeycomb sandwich panel produced by melt drag process, Shinichi Nishida; Yuki Akaike; Hideto Harada; Hisaki Watari, 2015年, International Journal of Mechanical and Production Engineering, 3, 1, 40, 42
  • Production of copper alloy sheet by twin roll casting, Shinichi Nishida; Fumiya Yamano; Hideto Harada; Hisaki Watari, 2015年, International Journal of Mechanical and Production Engineering, 3, 1, 36, 39
  • Manufacture of AZ31 magnesium alloy circular tubes by cold roll forming, Shinichi Nishida; Hayato Aso; Xu Wenqiang; Hisaki Watari, 2015年, International Journal of Mechanical and Production Engineering, 3, 1, 5-8.
  • Forming limit prediction of high tensile strength steel using FEA simulation, Ryosuke Kurihara; Shinichi Nishida; Hirotaka Kamiyama; Yuki Akaike, 2015年, International Journal of Engineering Research and Development, 11, 1, 46, 50
  • Direct cladding from molten metals of aluminum and magnesium alloys by using a tandem horizontal twin roll caster, Hideto Harada; Shinichi Nishida; Mayumi Suzuki; Hisaki Watari; Toshio Haga, 2015年, Applied Mechanics and Materials, 772, 1, 250, 256
  • Manufacturing method of increasing hollow steel shaft thickness using uniaxial pressing, Masahiro Dohi; Hirotaka Kamiyama; Shinichi Nishida; Hisaki Watari, 2014年, Applied Mechanics and Materials, 705, 1, 44, 50
  • Thickness increasing characteristics of steel pipe during die forming, Masahiro Dohi; Hirotaka Kamiyama; Shin-Ichi Nishida; Hisaki Watari, 2014年, Applied Mechanics and Materials, 575, 2, 276, 281
  • Cold roll forming of circular tube section for wrought magnesium alloy sheets, Hisaki Watari; Hidemitsu Hamano; Shin-ich Nishida; Shun-suke Kanai, 2013年, International Journal of Mining, Metallurgy Engineering, 1, 5, 313, 317
  • Casting of an Mg Alloy Clad Strip Using a Twin Roll Caster Equipped with a Scraper, Toshio Haga; Kentaro Okamura; Shinichi Nishida; Hisaki Watari; Kunio Matsuzaki, 2016年, Materials Science Forum, 879, 671, 676
  • Casting of Clad Strip of Al-SiCp, Magnesium Alloy Hard-Brittle Light Material by a Twin Roll Caster, Toshio HAGA; Kentaro OKAMURA; Hisaki WATARI; Shinichi NISHIDA, 2016年, Materials Science Forum, 879, 262, 266
  • FEM Analysis of Cold Flaring Process of SGP Pipe, Ryosuke Okushima; Shinichi Nishida; Junshi Ichikawa; Yuta Kashitani; Yujiro Nitta; Atsuhiro Aoki; Yuto akigawa; Hayato Aso; Hideto Harada; Akihiro Watanabe, 2017年, International Journal of Advanced Engineering, Management and Science, 3, 2, 75, 76
  • Forgeability of AZ Series Magnesium Alloy produced by Twin Roll Casting, Nao Ozawa; Shinichi Nishida; Toshio Haga; Junshi Ichikawa; Yuta Kashitani; Ryosuke Okushima; Yujiro Nitta; Atsuhiro Aoki; Yuto Takigawa; Hayato Aso; Hideto Harada; Akihiro Watanabe, 2017年, International Journal of Advanced Engineering, Management and Science, 3, 2, 77, 80
  • Evaluation of friction properties of magnesium alloy during hot forging by ring compression test, Sueji Hirawatari; Hisaki Watari; Shinichi Nishida; Yuki Sato; Mayumi Suzuki, 2017年, Materials Science Forum, 889, 119, 126
  • Direct molten metal rolling of aluminum alloy A3003, Hiroto Ohashi; Shinichi Nishida; Yuta Kashitani; Junshi Ichikawa; Nao Ozawa; Tomoya Suzuki; Ryosuke Okushima; Atsuhiro Aoki; Hideto Harada, 2017年, Key Engineering Materials, 735, 13, 17
  • Twin roll casting of aluminium alloy ADC12, A3003, A7075, Yuta Kashitani; Shinichi Nishida; Junshi Ichikawa; Hiroto Ohashi; Nao Ozawa; Ryosuke Okushima; Tomoya Suzuki; Yuto Takigawa; Hideto Harada, 2017年, Key Engineering Materials, 735, 18, 23
  • Magnesium Alloy Hard-Brittle Light Material by a Twin Roll Caster, T. Haga; K. Okamura; H. Watari; S. Nishida, 2017年, Materials Science Forum, 893, 262, 266
  • Casting of aluminum alloy clad strip by an unequal diameter twin-roll caster equipped with a scraper, Toshio Haga; Ryosuke Kozono; Shinichi Nishida; Hisaki Watari, 2017年, Advances in Materials and Processing Technologies, 4, 511, 521
  • Finite element method analysis of cold forging for deformation and densification of Mo alloyed sintered steel, Y Kamakoshi; S Nishida; K Kanbe; I Shohji, 2017年, IOP Conference Series: Materials Science and Engineering, 257, 12012
  • FEM analysis of cold flaring process of SUS304 pipe, Shinichi Nishida; Junshi Ichikawa; Yuta Kashitani; Kentaro Tsunoda; Yusuke Takeuchi; Yujiro Nitta; Yuto Takigawa; Atsuhiro Aoki; Yutaka Sato, 2018年, Defect and Diffusion Forum, 382, 120, 126

産業財産権

  • 特許権, 鋼管の冷間フレア成形加工装置及びその装置を用いた鋼管の冷間フレア成形加工方法

受賞

  • 平成17年度(第40回)日本塑性加工学会賞 学生奨励賞, 2005年
  • 日本塑性加工学会 優秀論文講演奨励賞受賞, 2004年

共同研究・競争的資金等の研究課題

  • マグネシウム合金やアルミニウム合金の薄板連続鋳造,および塑性加工に関する研究, 科学研究費補助金, 2011年, 2016年, 競争的資金
  • Strip casting of Al alloy and Mg alloy Plastic forming of metal materials, Grant-in-Aid for Scientific Research, 2011年, 2016年, 競争的資金

教育活動情報

担当経験のある科目(授業)

  • 機械材料, 群馬大学
  • CAD/CAM/CAE演習, 群馬大学


Copyright © MEDIA FUSION Co.,Ltd. All rights reserved.