Researcher Profile and Settings

Researcher

• Name

  SUZUKI Ryosuke

Profile and Settings

• Name

  Suzuki, Ryosuke

Affiliation

• Gunma University

Education

• Apr. 2008, Mar. 2011, Tokyo Metropolitan University, Graduate School of Systems Design, Department of Systems Design, Doctoral program
• Apr. 2006, Mar. 2008, Tokyo Metropolitan University, Graduate School of Systems Design, Department of Systems Design, Master's program
• Apr. 2004, Mar. 2006, Tokyo Metropolitan Institute of Technology, Department of Engineering, Department of Aerospace Engineering
• Apr. 1999, Mar. 2004, Tokyo Metropolitan College of Technology, Department of Mechanical Engineering

Degree

• Ph.D.

Association Memberships

• The Society of Materials Science, Japan, 2012, 9999
• Japan Foundry Engineering Society
• Japan society of mechanical engineering
• The Japan Institute of Metals and Materials
• The Japan Institute of Light Metals
• Material Testing Research Association of Japan

Research Experience

• 01 Apr. 2011, Gunma University

Research Activities

Research Interests

• aluminum
• Casting
• powder metallurgy
• materials mechanics
• metal foam

Published Papers

• Introduction of a Herbert Pendulum Hardness Tester Equipped with Raspberry Pi and Research on a Method for Converting Hardness Values Obtained from It, Ryosuke Suzuki, Masaaki Matsubara, Takumi Tagaya, and Tetsushi Kaburagi, 30 Apr. 2025, Journal of Technology and Social Science
• Development of a pendulum type puncture resistance verification device capable of determining the penetration / non-penetration of an injection needle through medical protective glove material, Kota KAWAMURA, Ryosuke SUZUKI, Masaaki MATSUBARA, 01 Oct. 2025, Journal of Material Testing Research Association, 70, 3, Scientific journal
• Development and investigation of availability of stand-alone type Herbert hardness tester, Ryosuke SUZUKI, Kazuki MURAKAMI, Takumi TAGAYA, Masaaki MATSUBARA and Tetsushi KABURAGI, 2024, Journal of Material Testing Research Association of Japan, 69, 4, 24, 29
• Fundamental Aspects of Wire Arc Additive Manufacturing for Aluminum Foams, Ryosuke Suzuki, Takaya Ikeda, Keishi Fujiwara, Kazuya Mita, Yoshihiko Hangai, Hidetoshi Fujii, Shigeaki Kobayashi, 25 May 2024, Materials Transactions, 65, 6, 672, 676
• Refoaming of deformed aluminum foam fabricated by precursor foaming process using remaining foaming agent and densification using friction stir welding, Yoshihiko Hangai, Tatsuki Takagi, Shinji Koyama, Ryosuke Suzuki, Yuichiroh Kamakoshi, 2023, Materials Letters, 351, 135008
• A1050アルミニウム/SS400鋼接合体のポーラス化による分離の検討，, 増田敦哉，半谷禎彦，三ツ木寛尚，鈴木良祐，松原雅昭，藤井英俊, 2022, 72, 6, 366, 370
• Classification of mechanical properties of aluminum foam by machine learning, Yoshihiko Hangai, Kenji Okada, Yuuki Tanaka, Tsutomu Matsuura, Kenji Amagai, Ryosuke Suzuki, Nobuaki Nakazawa, 2022, Mater. Trans., 63, 3, 257, 260
• プレス加工およびプレス型の横方向の往復運動による異種合金ポーラスアルミニウムの接合，, 永井孝直，半谷禎彦，三ツ木寛尚，松原雅昭，鈴木良祐, Jan. 2022, 72, 1, 16, 22
• ハーバート硬さ試験の非鋼質製刃物型試験片 刃先硬さ評価への応用, 松原雅昭, 鈴木良祐, 酒井健吾, 茂木達哉, Oct. 2021, 66, 4, 154, 159
• Leak-Before-Break and Plastic Collapse Strength Evaluation of Stainless Steel Piping with a Part-Through Notch by Using Double-Elastic-Deformation Method, Ogawa M, Matsubara M, Suzuki R, May 2020, Journal of Mechanical and Electrical Intelligent System, 3, 76, 86, Scientific journal
• 高精度アルミニウムダイカスト金型の深穴ドリル加工における高度熟練技能者の有する技術の自動加工への適用, *鈴木 良祐, 鏑木 哲志, 小宅 勝, 新井 宏章, 牧野 好晃, 黒瀬 雅詞, 久米原 宏之, 松原 雅昭, 01 Sep. 2021, 9, 2, Scientific journal
• Attempt on estimation of ultimate tensile strength and work hardening characteristics by Herbert hardness test, 鈴木 良祐;村上 一輝;丸橋 悠;石川 義輝;松原 雅昭;鏑木 哲志;中村 昌義, Jan. 2021, 66, 1, 3, 8, Scientific journal
• Herbert Hardness Test Using Accelerometer for Swing Angle Detection, Suzuki R, Kaburagi T, Maruhashi H, Ishikawa Y, Murakami K, Mitsugi H, Nakamura M, Matsubara M, 2021, Experimental Techniques, Scientific journal

  DOI
• Development of Advanced Herbert Hardness Tester by Incorporating Raspberry Pi Microcomputer, Murakami K, Suzuki R, Okada K, Goto Y, Mitsugi H, Kaburagi T, Matsubara M, 2021, Experimental Techniques, Scientific journal

  DOI
• Effect of Si Concentration of a Brazing Precursor on the Bonding Strength of Aluminum Foam Bonded via Foaming Bonding, Suzuki R, Hangai Y, Asakawa Y, Shohji I, Fujii H and Matsubara M, 2021, Materials Transactions, Scientific journal
• Compressive Properties of Three-Layered Porous Aluminum Fabricated by Spacer Method Using Dissimilar Alloy Powders, Hangai Yoshihiko;Ando Mizuki;Suzuki Ryosuke;Matsubara Masaaki;Utsunomiya Takao;Yoshikawa Nobuhiro, 2021, Journal of the Japan Institute of Metals and Materials, 85, 2, 84, 87, Scientific journal
• Shortening of NaCl removal process using granular NaCl in fabrication of porous aluminum by sintering and dissolution process, Ando Mizuki;Hangai Yoshihiko;Matsubara Masaaki;Suzuki Ryosuke;Yoshikawa Nobuhiro;Yoshikawa Naoto, 2021, Journal of Japan Institute of Light Metals, 71, 1, 68, 70, Scientific journal
• Quantitative Evaluation of Expert Skills of Deep Hole Processing with Drill for Manufacturing High Precise Aluminum Alloy Die-casting Die for Alternative Automotive, Suzuki Ryosuke;Kaburagi Tetsushi;Oyake Masaru;Arai Hiroaki;Makino Yoshiaki;Kurose Masashi;Kumehara Hiroyuki;Matsubara Masaaki, 2021, The Japanese Journal of the Institute of Industrial Applications Engineers, 9, 1, 14, 20, Scientific journal
• Compressive properties of two-layered aluminum foams with closed-cell and open-cell structures, Hangai, Yoshihiko;Ando, Mizuki;Ohashi, Masataka;Amagai, Kenji;Suzuki, Ryosuke;Matsubara, Masaaki;Yoshikawa, Nobuhiro, 2020, MATERIALS TODAY COMMUNICATIONS, 24, 101249, Scientific journal

  DOI
• Leak-before-break and plastic collapse strength evaluation of stainless steel piping with a part-through notch, OGAWA Masato;MATSUBARA Masaaki;SUZUKI Ryosuke, 2020, Mechanical Engineering Journal, 7, 3, 19, 00559-19-00559, Scientific journal
• Applicability of pin screen mold in gravity casting of aluminum alloy, Yamamoto Takaya;Hangai Yoshihiko;Suzuki Ryosuke;Matsubara Masaaki, 2020, Journal of Japan Institute of Light Metals, 70, 8, 347, 349, Scientific journal
• Fabrication of Porous Aluminum Alloy by Precursor Method Using Vertical Type Twin-Roll Casting, Suzuki Ryosuke;Masubuchi Takumi;Nishida Shinichi;Shoji Ikuo;Hangai Yoshihiko;Fujii Hidetoshi;Matsubara Masaaki, 2020, Journal of Japan Foundry Engineering Society, 92, 11, 577, 582, Scientific journal
• Jointing of porous aluminum by press forming of multiple precursors during foaming process, Ohashi Masataka;Hangai Yoshihiko;Amagai Kenji;Matsubara Masaaki;Suzuki Ryosuke;Utsunomiya Takao;Yoshikawa Nobuhiro, 2020, Journal of Japan Institute of Light Metals, 70, 11, 517, 522, Scientific journal
• Fabrication of Ni/PSZ functionally gradient materials using powder sintering method and their high temperature strength evaluation, 高際 一輝;松原 雅昭;鈴木 良祐;舩津 賢人, Oct. 2019, 64, 4, 202, 204
• Application of Herbert hardness test to sword, 酒井 健吾;松原 雅昭;鈴木 良祐, Oct. 2019, 64, 4, 205, 207
• Flaw evaluation and maximum stress evaluation of stainless piping under axial tension and bending load, 加藤 諒;松原 雅昭;鈴木 良祐, Oct. 2019, 64, 4, 208, 210
• Effect of aging time on material strength of Jomon ware and plasticity of Jomon ware materials after kneading clay from the viewpoint of materials science, 田島 侑河;松原 雅昭;鈴木 良祐, Oct. 2019, 64, 4, 211, 213
• Aluminum Foam-Filled Steel Tube Fabricated from Aluminum Burrs of Die-Castings by Friction Stir Back Extrusion, Hangai, Yoshihiko;Kobayashi, Ryusei;Suzuki, Ryosuke;Matsubara, Masaaki;Yoshikawa, Nobuhiro, 2019, METALS, 9, 2, Scientific journal

  DOI
• Refoaming of deformed aluminum foam by precursor foaming process, Hangai, Yoshihiko;Matsushita, Hayato;Suzuki, Ryosuke;Koyama, Shinji;Amagai, Kenji;Nagahiro, Ryohei;Utsunomiya, Takao;Matsubara, Masaaki;Yoshikawa, Nobuhiro, 2019, JOURNAL OF POROUS MATERIALS, 26, 4, 1149, 1155, Scientific journal

  DOI
• Fabrication of Porous Aluminum Filled Aluminum Pipe from Aluminum Recycle Chips by Friction Stir Back Extrusion, Hangai Yoshihiko;Kobayashi Ryusei;Suzuki Ryosuke;Matsubara Masaaki;Yoshikawa Nobuhiro, 2019, Journal of the Japan Institute of Metals and Materials, 83, 8, 288, 291, Scientific journal
• AC4CHと異種アルミニウム合金を用いた傾斜機能ポーラスアルミニウムの作製, 安藤 瑞季;半谷 禎彦;天谷 賢児;永廣 怜平;鈴木 良祐;吉川 暢宏, 2019, Journal of the Reports of the Japan Foundry Engineering Society Meeting, 173, 0, 17, 17
• ADC12を母材としたポーラスアルミニウムの発泡過程における接合法の検討, 大橋 政孝;半谷 禎彦;永廣 怜平;天谷 賢児;鈴木 良祐;宇都宮 登雄;吉川 暢宏, 2019, Journal of the Reports of the Japan Foundry Engineering Society Meeting, 173, 0, 16, 16
• LEAK BEFORE BREAK AND PLASTIC COLLAPSE STRENGTH EVALUATION OF STAINLESS STEEL PIPING WITH A PART THROUGH NOTCH, Ogawa Masato;Matsubara Masaaki;Suzuki Ryosuke, 2019, The Proceedings of the International Conference on Nuclear Engineering (ICONE), 2019, 0
• Productivity Improvement of Aluminum Die-cast Mold for Next Generation Vehicle, Kaburagi Tetsushi;Oyake Masaru;Arai Hiroaki;Makino Yoshiaki;Kurose Masashi;Kumehara Hiroyuki;Matsubara Masaaki;Suzuki Ryosuke, 2019, Proceedings of IIAE Annual Conference, 2019, 0, 15, 16
• Evaluation for Tensile Characteristics of Steel by Herbert Hardness Test, SUZUKI Ryosuke;MATSUBARA Masaaki;MARUHASHI Haruka, 2019, The Proceedings of Mechanical Engineering Congress, Japan, 2019, 0
• Effect of aging time on strength properties and plasticity of Jomon ware, NATORI Yuto;MASTUBARA Masaaki;SUZUKI Ryosuke, 2019, The Proceedings of Ibaraki District Conference, 2019, 0
• Hardness test using acceleration sensor installed Herbert pendulum, SUZUKI Ryosuke;MATSUBARA Masaaki;SAKAI Kengo, 2019, The Proceedings of Ibaraki District Conference, 2019, 0
• Plastic Collapse Strength and Maximum Stress Evaluation of a Flawed Stainless Piping Subjected to Axial Tension and Bending, 高野 晃輔;新井 健斗;森田 直哉;鈴木 良祐;松原 雅昭, Oct. 2018, 63, 4, 199, 201
• Production and Evaluation of Ultra High Temperature Strength of Thermal Stress relieving Type Functionally Graded Materials, 立石 昂大;渡邉 祥平;鈴木 良祐;舩津 賢人;松原 雅昭, Oct. 2018, 63, 4, 202, 204
• Effect of Aging Time on Strengths of Jomon Ware, 名取 優斗;鈴木 良祐;松原 雅昭, Oct. 2018, 63, 4, 205, 207
• Fundamental Study for Twin Rolls Casting on Fabrication of Aluminum Foam, 増渕 匠;茂木 稜典;鈴木 良祐;松原 雅昭, Oct. 2018, 63, 4, 208, 210
• Fabrication of bilayer tube consisting of outer aluminum foam tube and inner dense aluminum tube by friction stir back extrusion, Hangai, Yoshihiko;Otazawa, Shunsuke;Utsunomiya, Takao;Suzuki, Ryosuke;Koyama, Shinji;Matsubara, Masaaki;Yoshikawa, Nobuhiro, 2018, MATERIALS TODAY COMMUNICATIONS, 15, 36, 42, Scientific journal

  DOI
• Fabrication of Two-Layered Aluminum Foam Having Layers with Closed-Cell and Open-Cell Pores, Hangai, Yoshihiko;Ikeda, Hiroki;Amagai, Kenji;Suzuki, Ryosuke;Matsubara, Masaaki;Yoshikawa, Nobuhiro, 2018, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 49A, 10, 4452, 4455, Scientific journal

  DOI
• Fabrication of Aluminum Pipe from Aluminum Chips by Friction Stir Back Extrusion, Hangai Yoshihiko;Kobayashi Ryusei;Suzuki Ryosuke;Matsubara Masaaki;Yoshikawa Nobuhiro, 2018, Journal of the Japan Institute of Metals and Materials, 82, 2, 33, 38, Scientific journal
• Re-foaming of Crushed Aluminum Foam by Melt Route with Remaining Blowing Agent After Crushing, Hangai Yoshihiko;Matsushita Hayato;Nishimoto Takuma;Suzuki Ryosuke;Koyama Shinji;Matsubara Masaaki;Shimizu Katsushige;Akimoto Kiyotaka;Yoshikawa Nobuhiro, 2018, Journal of Japan Foundry Engineering Society, 90, 7, 381, 385, Scientific journal
• Fabrication of Aluminum Foam by Casting Precursor Method, Suzuki Ryosuke;Nishimoto Takuma;Hangai Yoshihiko;Shoji Ikuo;Matsubara Masaaki, 2018, Journal of the Japan Institute of Metals and Materials, 82, 9, 349, 357, Scientific journal
• Material properties of Tetrix for demonstration equipment, Yu Yamada; Ryosuke Suzuki; Kaito Yoshinaga; Takaaki Suzuki; Masaaki Matsubara; Kou Yamada, Dec. 2017, International Journal of Innovative Computing, Information and Control, 13, 6, Scientific journal

  DOI
• Hardness evaluation of knife edge with Herbert hardness test, 鈴木 良祐;Halama Radim;井上 洋介;中村 昌義;鏑木 哲志;藤本 博之;丸橋 悠;萩原 司;松原 雅昭, Oct. 2017, 62, 4, 216, 220, Scientific journal
• Reproducibility of Aluminum Foam by Combining Sintering and Dissolution Process with Precursor Foaming Process, Hangai, Yoshihiko; Matsushita, Hayato; Koyama, Shinji; Suzuki, Ryosuke; Matsubara, Masaaki, Jul. 2017, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 48A, 7, Scientific journal

  DOI
• Cutting process for aluminum foam fabricated by sintering and dissolution process, Yoshihiko Hangai; Nguyen Ngoc Minh; Tomoaki Morita; Ryosuke Suzuki; Masaaki Matsubara; Shinji Koyama, May 2017, ADVANCED POWDER TECHNOLOGY, 28, 5, 1426, 1429, Scientific journal

  DOI
• Mechanics of Herbert pendulum hardness tester and its application, Radim Halama; Jiri Podesva; Ryosuke Suzuki; Masaaki Matsubara; Rostislav Cech, 2017, Key Engineering Materials, 741, 122, 127, International conference proceedings

  DOI
• ハーバート硬さ試験を利用した包丁の刃先の硬さ評価, SUZUKI Ryosuke;INOUE Yosuke;NAKAMURA Masayoshi;KABURAGI Tetsushi;HAGIWARA Tsukasa;FUJIMOTO Hiroyuki;MATSUBARA Masaaki, 2017, The Proceedings of Ibaraki District Conference, 2017, 0
• 鋳造発泡法による発泡アルミニウムの作製と衝撃吸収によって圧潰した発泡アルミニウムの残留発泡剤による再発泡, 松下 駿人;グエンドゥックヒエウ;西本 拓真;半谷 禎彦;鈴木 良祐;松原 雅昭;吉川 暢宏, 2017, Journal of the Reports of the Japan Foundry Engineering Society Meeting, 170, 0, 50, 50
• Hardness evaluation of blade edge using Herbert hardness test, SUZUKI Ryosuke;KABURAGI Tetsushi;NAKAMOTO Junpei;MATSUBARA Masaaki, 2017, The Proceedings of Mechanical Engineering Congress, Japan, 2017, 0
• 摩擦圧接による廃材を利用したADC12 緻密パイプの作製, 小林 龍聖;半谷 禎彦;鈴木 良祐;松原 雅昭, 2017, Journal of the Reports of the Japan Foundry Engineering Society Meeting, 169, 0, 39, 39
• Relationship between damping hardness and tensile properties of metals on Herbert hardness test, 鈴木 良祐;鏑木 哲志;藤本 博之;瀬田川 拓磨;松原 雅昭, Jul. 2016, 61, 3, 216, 221, Scientific journal
• Hardness Measurement for Metals Using Lightweight Herbert Pendulum Hardness Tester With Cylindrical Indenter, R. Suzuki; T. Kaburagi; M. Matsubara; T. Tashiro; T. Koyama, Apr. 2016, EXPERIMENTAL TECHNIQUES, 40, 2, 795, 802, Scientific journal

  DOI
• A study of Herbert hardness tester to practical use (Relationship between damping hardness and Brinell hardness), 鏑木 哲志;鈴木 良祐;松原 雅昭;田代 継治;黒瀬 雅詞, Apr. 2016, 61, 2, 74, 78, Scientific journal
• Observation and Evaluation of Plastic Collapse for Double-Notch Pipe, R. Suzuki; M. Matsubara; K. Sakamoto; M. Suzuki; T. Shiraishi; S. Yanagihara; S. Izawa; T. Wakai, Feb. 2016, EXPERIMENTAL TECHNIQUES, 40, 1, 253, 260, Scientific journal

  DOI
• Fabrication of porous aluminum by calcium carbonate as a foaming agent, MATSUSHITA Hayato;HANGAI Yoshihiko;SUZUKI Ryosuke;MATSUBARA Msaaki;KOYAMA Shinji, 2016, The Proceedings of the Materials and Mechanics Conference, 2016, 0, OS15, 6
• Evaluation of hardness of metals and nonmetals using Herbert hardness tester, SUZUKI Ryosuke;KABURAGI Tetsushi;SETAGAWA Takuma;MATSUBARA Masaaki, 2016, The Proceedings of the Materials and Mechanics Conference, 2016, 0, GS, 35
• Effect of test load on damping hardness in Herbert hardness test, SUZUKI Ryosuke;KABURAGI Tetsushi;MATSUBARA Masaaki;SETAGAWA Takuma;SHIMIZU Ryohei, 2016, The Proceedings of Ibaraki District Conference, 2016, 0
• Manufacturing aluminum foam using melt direct rolling, 鈴木 良祐;茂木 稜典;西田 進一;鏑木 哲志;萩原 司;松原 雅昭, 2016, The Proceedings of the Materials and processing conference, 2016, 0
• Effect of the LEGO Block in the Equipment Development, YAMADA Yu;SUZUKI Ryosuke;SHIOMI Sachie;SUZUKI Takaaki;MATSUBARA Masaaki;YAMADA Kou, 2016, Proceedings of the Annual Conference of Biomedical Fuzzy Systems Association, 29, 0, 135, 136
• Development of an unstable failure analysis procedure considering change of compliance at a crack part of SFR pipes, Takashi Wakai; Hideo Machida; Shinji Yoshida; Seiji Yanagihara; Ryosuke Suzuki; Masaaki Matsubara; Yasuhiro Enuma, Oct. 2015, ENGINEERING FAILURE ANALYSIS, 56, 484, 500, Scientific journal

  DOI
• Application of a motion-capture technique to Herbert hardness test, 鈴木 良祐;鏑木 哲志;松原 雅昭, Jan. 2015, 60, 1, 65, 70, Scientific journal
• Bonding Process between Aluminum Foams Using Foaming of Low Melting Point Precursor, Suzuki Ryosuke;Sakurai Yu;Matsubara Masaaki, Feb. 2016, Journal of the Japan Institute of Metals and Materials, 80, 2, 134, 139, Scientific journal
• Effect of CFRTP Forming Temperature on Flexural Strength and Hardness Using Pendulum Type Hardness Tester, KABURAGI Tetsushi;SUZUKI Ryosuke;KUROSE Masashi;MATSUBARA Masaaki;TASHIRO Tsuguharu, 2015, Journal of the Society of Materials Science, Japan, 64, 12, 1010, 1017, Scientific journal
• OS1008-389 Relationship between damping hardness and mechanical properties of metals, TASHIRO Tsuguharu;MATSUBARA Masaaki;SUZUKI Ryosuke;KABURAGI Tetsushi;FUJIMOTO Heroyuki, 2015, The Proceedings of the Materials and Mechanics Conference, 2015, 0, _OS1008, 38-_OS1008-38
• OS0909-388 Plastic collapse strength evaluation of notched stainless pipes under the combined load considering load history, OMORI Atsushi;MATSUBARA Masaaki;SUZUKI Ryousuke;YANAGIHARA Seiji;MORIJIRI Mitsugu;SAKAMOTO Kenji, 2015, The Proceedings of the Materials and Mechanics Conference, 2015, 0, _OS0909, 38-_OS0909-38
• OS0806-424 Improvement of strength of porous aluminum by ADC12 aluminum alloy powder addition, IKEDA Hiroki;HANGAI Yoshihiko;SUZUKI Ryosuke;MATSUBARA Masaaki;YOSHIKAWA Nobuhiro, 2015, The Proceedings of the Materials and Mechanics Conference, 2015, 0, _OS0806, 42-_OS0806-42
• GS0506-387 Manufacturing of aluminum foams by recycling of aluminum foil chips, OGURA Masanori;SUZUKI Ryosuke;MATSUBARA Masaaki;KATOU Takanari, 2015, The Proceedings of the Materials and Mechanics Conference, 2015, 0, _GS0506, 38-_GS0506-38
• GS0505-437 Production and Compression Behavior Evaluation of Aluminum Foams by Casting Precursor Method, SUZUKI Ryosuke;MATSUBARA Masaaki;NISHIMOTO Takuma, 2015, The Proceedings of the Materials and Mechanics Conference, 2015, 0, _GS0505, 43-_GS0505-43
• GS0504-419 Development and high-temperature strength evaluation of multi layered and functionally graded materials by using binder gradient composition, FUKUOKA Miki;MATSUBARA Masaaki;SUZUKI Ryosuke;FUNATSU Masato;SAKAMOTO Kenji;YAMATO Masaru;NAKAJIMA Yuta;OGAWA Sho, 2015, The Proceedings of the Materials and Mechanics Conference, 2015, 0, _GS0504, 41-_GS0504-41
• J0330404 Foaming bonding between the aluminium foams using a flux, SUZUKI Ryosuke;MATSUBARA Masaaki;SAKURAI Yu, 2015, The Proceedings of Mechanical Engineering Congress, Japan, 2015, 0, _J0330404, -_J0330404-
• 205 Hardness of metal with improved Herbert hardness tester, KOYAMA Toshimitu;SUZUKI Ryousuke;KABURAGI Tetsushi;MATSUBARA Masaaki;SAKAMOTO Kenji, 2013, The Proceedings of Ibaraki District Conference, 2013, 0, 245, 246
• 203 Thermal stress control of multi layered functionally graded material manufactured with powder metallurgical technique using composition, Suzuki Ryosuke;Matsubara Masaaki;Maruyama Takumi, 2013, The Proceedings of Ibaraki District Conference, 2013, 0, 241, 242
• OS0821 Collapse strength of SUS304 steel pipes with circumferential multiple notches subjected to axial tension and bending, SHIRAISHI Taisuke;MATSUBARA Masaaki;SUZUKI Ryousuke;SUZUKI Masato;YANAGIHARA Seiji;SAKAMOTO Kenji;WAKAI Takashi, 2012, The Proceedings of the Materials and Mechanics Conference, 2012, 0, _OS0821, 1_-_OS0821-3_
• OS0820 Plastic collapse strength and maximum load evaluation method of flawed stainless piping subjected to axial tension and bending, YANAGIHARA Seiji;MATSUBARA Masaaki;SUZUKI Ryousuke;SUZUKI Masato;SHIRAISHI Taisuke;SAKAMOTO Kenji;WAKAI Takashi, 2012, The Proceedings of the Materials and Mechanics Conference, 2012, 0, _OS0820, 1_-_OS0820-2_
• GS07 Fracture Mechanics Study on the Johmon Pottery Material, MATSUBARA Masaaki;OZAWA Kosuke;SUZUKI Ryosuke;SAKAMOTO Kenji, 2012, The Proceedings of the Materials and Mechanics Conference, 2012, 0, _GS07, 1_-_GS07-2_
• 206 Fabrication and evaluation of multilayerd functionally graded material fabricated by powder molding method, MARUYAMA Takumi;MATSUBARA Masaaki;FUNATSU Masato;SUZUKI Ryosuke;SAKAMOTO Kenji;NARUSE Sho, 2012, The Proceedings of Ibaraki District Conference, 2012, 0, 43, 44
• Novel strengthening method of closed-cell aluminum foams through surface treatment by resin, Koichi Kitazono; Ryosuke Suzuki, Apr. 2009, Journal of Materials Processing Technology, 209, 7, Scientific journal
• Effect of Graded Pore Distribution on Thermal Insulation of Metal Foam, Suzuki Ryosuke;Kitazono Koichi, 2008, Journal of the Japan Institute of Metals and Materials, 72, 9, 758, 762
• Compressive Properties of Three-Layered Porous Aluminum Fabricated by Spacer Method Using Dissimilar Alloy Powders, Hangai, Yoshihiko;Ando, Mizuki;Suzuki, Ryosuke;Matsubara, Masaaki;Utsunomiya, Takao;Yoshikawa, Nobuhiro, 2021, JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS, 85, 2, 84, 87

  DOI
• Effect of Si Concentration of a Brazing Precursor on the Bonding Strength of Aluminum Foam Bonded via Foaming Bonding, Suzuki, Ryosuke;Hangai, Yoshihiko;Asakawa, Yusuke;Shohji, Ikuo;Fujii, Hidetoshi;Matsubara, Masaaki, 2021, MATERIALS TRANSACTIONS, 62, 8, 1210, 1215

  DOI
• Friction welding of porous aluminum and polycarbonate plate, Hangai, Yoshihiko;Kishimoto, Rikuto;Ando, Mizuki;Mitsugi, Hironao;Goto, Yu;Kamakoshi, Yuichiroh;Suzuki, Ryosuke;Matsubara, Masaaki;Aoki, Yasuhiro;Fujii, Hidetoshi, 2021, MATERIALS LETTERS, 304

  DOI
• Classification of Mechanical Properties of Aluminum Foam by Machine Learning, Hangai, Yoshihiko;Okada, Kenji;Tanaka, Yuuki;Matsuura, Tsutomu;Amagai, Kenji;Suzuki, Ryosuke;Nakazawa, Nobuaki, 2022, MATERIALS TRANSACTIONS, 63, 2, 257, 260

  DOI
• Fabrication of porous aluminum composites containing hollow ceramics, Yamamoto, Takaya;Hangai, Yoshihiko;Mitsugi, Hironao;Koyama, Shinji;Suzuki, Ryosuke;Matsubara, Masaaki;Fujii, Hidetoshi, 2022, JOURNAL OF POROUS MATERIALS, 29, 5, 1363, 1368

  DOI
• Joining by press forming of porous aluminum and metal plate during heating, OTSUKA Shun;HANGAI Yoshihiko;OHASHI Msataka;SUZUKI Ryosuke;MATSUBARA Masaaki, 2020, The Proceedings of the Materials and processing conference, 2020.28, 0, 214
• Separation of aluminum joint part by foaming, MASUDA Atsuya;HANGAI Yoshihiko;MATSUBARA Masaaki;SUZUKI Ryosuke;FUJII Hidetoshi, 2020, The Proceedings of the Materials and processing conference, 2020.28, 0, 215
• Effect of Si Concentration of a Brazing Precursor on the Bonding Strength of Aluminum Foam Bonded via Foaming Bonding, Suzuki Ryosuke;Hangai Yoshihiko;Asakawa Yusuke;Shohji Ikuo;Fujii Hidetoshi;Matsubara Masaaki, Aug. 2021, MATERIALS TRANSACTIONS, 62, 8, 1210, 1215
• Joining the Aluminum Foams Using Foaming, SUZUKI Ryosuke, 2021, JOURNAL OF THE JAPAN WELDING SOCIETY, 90, 6, 420, 423
• Application of Advanced Skills of Highly-Skilled Workers to High-precision Deep Hole Drilling of Aluminum Alloy Die-casting Die, Suzuki Ryosuke;Kaburagi Tetsushi;Oyake Masaru;Arai Hiroaki;Makino Yoshiaki;Kurose Masashi;Kumehara Hiroyuki;Matsubara Masaaki, 2021, The Japanese Journal of the Institute of Industrial Applications Engineers, 9, 2, 93, 101
• 鋳造を利用したプリカーサ法における溶湯への増粘剤粒子添加方法の検討, 鈴木 良祐;松原 雅昭;半谷 禎彦;荘司 郁夫;藤井 英俊, 2021, Journal of the Reports of the Japan Foundry Engineering Society Meeting, 177, 0, 102, 102
• ハーバート硬さ試験機を用いた減衰硬さによる加工硬化特性の予測, 鈴木 良祐, 2020, Report of Grant-Supported Researches The Amada Foundation, 33, 0, 135
• Classification of Mechanical Properties of Aluminum Foam by Machine Learning, Hangai Yoshihiko;Okada Kenji;Tanaka Yuuki;Matsuura Tsutomu;Amagai Kenji;Suzuki Ryosuke;Nakazawa Nobuaki, Feb. 2022, MATERIALS TRANSACTIONS, 63, 2, 257, 260
• Joining of dissimilar alloy porous aluminum by press forming with reciprocated press die, Nagai Takanao;Hangai Yoshihiko;Mitsugi Hironao;Matsubara Masaaki;Suzuki Ryosuke, Jan. 2022, Journal of Japan Institute of Light Metals, 72, 1, 16, 21
• Strength Investigation of TETRIX for the Safety of Demonstration Equipment of Automatic Control Theory, Yamada Yu;Suzuki Ryosuke;Suzuki Takaaki;Matsubara Masaaki;Yamada Kou, 2017, ICIC Express Letters, Part B: Applications, 8, 11, 1513
• Machine Learning Estimation of Plateau Stress of Aluminum Foam Using X-ray Computed Tomography Images, Hangai, Yoshihiko;Ozawa, So;Okada, Kenji;Tanaka, Yuuki;Amagai, Kenji;Suzuki, Ryosuke, 2023, MATERIALS, 16, 5, ma16051894

  DOI
• Easy dismantling and separation of friction stir-welded steel and aluminum by foaming, Hangai, Yoshihiko;Masuda, Atsuya;Suzuki, Ryosuke;Aoki, Yasuhiro;Matsubara, Masaaki;Fujii, Hidetoshi, 2023, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

  DOI
• Refoaming of deformed aluminum foam fabricated by precursor foaming process using remaining foaming agent and densification using friction stir welding, Hangai, Yoshihiko;Takagi, Tatsuki;Koyama, Shinji;Suzuki, Ryosuke;Kamakoshi, Yuichiroh, 2023, MATERIALS LETTERS, 351

  DOI
• Machine Learning Estimation of Plateau Stress of Aluminum Foam Using X-ray Computed Tomography Images., Hangai Yoshihiko;Ozawa So;Okada Kenji;Tanaka Yuuki;Amagai Kenji;Suzuki Ryosuke, Feb. 2023, Materials (Basel, Switzerland), 16, 5

  DOI

MISC

• ポーラスアルミニウム作製時における摩擦攪拌接合の溶湯直接圧延を用いた簡便化方法，, 富田雄，半谷禎彦，西田進一，鈴木良祐，吉川暢宏, 20 Oct. 2023, 35, 35
• 初期発泡後の未分解発泡剤を活用したポーラスアルミニウムの再発泡，, 髙木樹，半谷禎彦，鈴木良祐, 12 May 2023, 35, 36
• 若手技術者・研究者の紹介（ウェルカフェ）, 鈴木良祐, 2023
• ポーラスアルミニウムの紹介 〜クレーンにおけるポーラスアルミニウムの 利用およびポーラスアルミニウムの接合技術〜, 鈴木良祐, Jan. 2023, 331, 2, 7
• ADC12とSS400接合体のポーラス化による分離の検討, 増田敦哉，半谷禎彦，鈴木良祐，松原雅昭，藤井英俊, 21 May 2022
• プリカーサ法によって作製したポーラス鉄の添加粉末による発泡への影響, 青木智史，半谷禎彦，松原雅昭，鈴木良祐，三ツ木寛尚, May 2022, 321, 322, Summary national conference
• 光加熱を用いたポーラスアルミニウムと金属板との接合とその接合強度, 大塚駿，半谷禎彦，大橋政孝，三ツ木寛尚，鈴木良祐，松原雅昭, May 2021, 293, 294, Summary national conference
• 含砂率の異なる古代セラミックスのき裂進展速度および強度の評価, 植村竜昇, 松原雅昭, 鈴木良祐, Oct. 2021, 66, 4, 130, 132, Report scientific journal
• Repairing for aluminum foam using low-melting-point precursor, 浅川 友祐;鈴木 良祐;松原 雅昭, Oct. 2019, 64, 4, 199, 201, Summary national conference
• 横方向の振動を加えたプレス加工によって発泡直後に接合したADC12-A1050傾斜機能ポーラスアルミニウムの特性評価, 永井 孝直;半谷 禎彦;大橋 政孝;鈴木 良祐;松原 雅昭, 2020, 176, 179, 182, Summary national conference
• スペーサー法による顆粒NaCl を用いたAC4CHポーラスアルミニウムの作製, 安藤 瑞季;半谷 禎彦;松原 雅昭;鈴木 良祐;吉川 直人, 2020, 176, 168, 170, Summary national conference
• Evaluation of Strength and Plasticity of Jomon Ware Materials by Difference in Clay Origin, 飯塚 知季;松原 雅昭;鈴木 良祐, Oct. 2020, 65, 4, 191, 193
• Effect of layered microstructure of the aluminum precursor manufactured from sheet material on the foaming behavior, Ryosuke Suzuki; Koichi Kitazono, 2011, 27
• Load history dependency of plastic collapse behavior of cracked piping, R. Suzuki; M. Matsubara; M. Suzuki; T. Shiraishi; S. Yanagihara; K. Sakamoto; S. Izawa, 2013, Conference Proceedings of the Society for Experimental Mechanics Series, 4, 149, 155

  DOI
• Mechanical properties investigation of aluminum alloy components included in TETRIX to ensure the safety of demonstration equipment for automatic control theory, Y. Yamada; R. Suzuki; T. Suzuki; M. Matsubara; K. Yamada, 2017, Proceedings on 12th International Conference on Innovative Computing, Information and Control (ICICIC 2017), Summary international conference
• Improvement of the Herbert pendulum hardness tester, T. Kaburagi; R. Suzuki; M. Matsubara; T. Koyama; T. Tashiro, 2014, Proceedings on NEW METHODS OF DAMAGE AND FAILURE ANALYSIS OF STRUCTURAL PARTS, Summary international conference
• Development of a crack opening displacement assessment procedure considering change of compliance at a crack part in thin wall pipes made of modified 9Cr-1Mo Steel, T. Wakai; H. Machida; M. Arakawa; S. Yoshida; S. Yanagihara; R. Suzuki; M. Matsubara; Y. Enuma, 2014, Proceedings on NEW METHODS OF DAMAGE AND FAILURE ANALYSIS OF STRUCTURAL PARTS, Summary international conference
• A study on the improvement of the Herbert pendulum hardness tester, T. Kaburagi; M. Matsubara; R. Suzuki; T. Koyama, 2013, Proceedings on LEM 21
• Material properties of TETRIX for demonstration equipment, Ryosuke Suzuki; Yu Yamada; Takaaki Suzuki; Masaaki Matsubara; Kou Yamada, 10 Nov. 2017, 2017 56th Annual Conference of the Society of Instrument and Control Engineers of Japan, SICE 2017, 2017-, 946, 948

  DOI
• Evaluation and discussion of material strength of flat bar in TETRIX for design and manufacture of demonstration equipment for automatic control theory, Ryosuke Suzuki; Yu Yamada; Kaito Yoshinaga; Takaaki Suzuki; Masaaki Matsubara; Kou Yamada, 03 Nov. 2017, ECTI-CON 2017 - 2017 14th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, 794, 797, Summary international conference

  DOI
• Collapse evaluation of double notched stainless pipes subjected to combined tension and bending, R. Suzuki; M. Matsubara; S. Yanagihara; M. Morijiri; A. Omori; T. Wakai, 2014, Proceedings on NEW METHODS OF DAMAGE AND FAILURE ANALYSIS OF STRUCTURAL PARTS, Summary international conference
• Experimental Investigation of Manufacturing Possibility of Multilayered Ni-Zro2 System Functionally Graded Material by Powder Injection Molding, R. Suzuki; M. Matsubara; T. Maruyama; K. Arakawa, 2013, Proceedings on International Mechanical Engineering Congress and Exposition 2013, 2A, IMECE2013-66233, V02AT02A057, Summary international conference

  DOI
• Load history dependency of plastic collapse behavior of cracked piping, R. Suzuki; M. Matsubara; M. Suzuki; T. Shiraishi; S. Yanagihara; K. Sakamoto; S. Izawa, 2013, Conference Proceedings of the Society for Experimental Mechanics Series, 4, 149, 155

  DOI
• Estimation of stress－displacement curve of multiple notched stainless steel pipe under combined load of axial force and bending, R. Suzuki; M. Matsubara; K. Arai; K. Takano; T. Hagiwara, 2018, Proceedings on SME 2018 Pressure Vessels & Piping Conference (PVP2018), Summary international conference
• Mechanics of Herbert pendulum hardness tester and its application, R. Halama; J. Podesva; R. Suzuki; M. Matsubara, 2016, Proceedings on NEW METHODS OF DAMAGE AND FAILURE ANALYSIS OF STRUCTURAL PARTS
• Effects of weight Herbert pendulum on hardness evaluation, R. Suzuki; T. Kaburagi; T. Setagawa; M. Matsubara, 2016, Proceedings on NEW METHODS OF DAMAGE AND FAILURE ANALYSIS OF STRUCTURAL PARTS, Summary international conference
• Hardness Evaluation of Cutting Tools Using Herbert Hardness Tester, 茂木 達哉;松原 雅昭;鈴木 良祐, Oct. 2020, 65, 4, 174, 176
• Leak-Before-Break Evaluation of Stainless Steel Piping with a Part-through Notch Considering Load History, 川村 大輝;松原 雅昭;鈴木 良祐, Oct. 2020, 65, 4, 177, 179
• Development of Thermal Stress Relaxation Type Functionally Graded Materials and Their Tensile Properties Evaluation at Room Temperature, 千島 周;松原 雅昭;鈴木 良祐, Oct. 2020, 65, 4, 180, 182
• Development of Herbert Hardness Tester Compatible with IoT, 村上 一輝;松原 雅昭;鈴木 良祐;鏑木 哲志, Oct. 2020, 65, 4, 183, 185
• Development and High Temperature Strength Evaluation of Thermal Stress Relaxation Type Functionally Graded Materials, 角館 春輝;松原 雅昭;鈴木 良祐;舩津 賢人, Oct. 2020, 65, 4, 186, 188
• 発泡直後のポーラスアルミニウムと加熱した金属板とのプレスによる接合, 大塚 駿, 半谷 禎彦, 大橋 政孝, 鈴木 良祐, 松原 雅昭, 宇都宮 登雄, 2020, 176, 175, Summary national conference

  DOI
• 縄文土器材料の強度および可塑性に及ぼす含水率および含砂率の影響, 及川竣太, 松原雅昭, 鈴木良祐, Oct. 2021, 66, 4, 133, 135, Report scientific journal
• 複合荷重下における複数切欠付ステンレス鋼配管の塑性崩壊強度評価, 中里幸樹, 松原雅昭, 鈴木良祐, Oct. 2021, 66, 4, 136, 138, Report scientific journal
• 熱応力緩和型 Ni/PSZ 系傾斜機能材料の創製と一方向加熱によるクリープ破断試験, 高橋直也, 松原雅昭, 鈴木良祐, Oct. 2021, 66, 4, 139, 141, Report scientific journal
• 溶湯直接圧延を用いて製作した発泡アルミニウムに及ぼす増粘剤添加量の影響, 池田貴也, 松原雅昭, 鈴木良祐, Oct. 2021, 66, 4, 142, 144, Report scientific journal
• アルミ合金に施されたアルマイト皮膜のハーバート硬さ試験機による厚さ評価, 高田颯太, 松原雅昭, 鈴木良祐, Oct. 2021, 66, 4, 145, 147, Report scientific journal
• 鉄とアルミニウム接合部のポーラス化による分離方法の検討, 増田敦哉，半谷禎彦，三ツ木寛尚，鈴木良祐，松原雅昭，藤井英俊, May 2021, 313, 314, Summary national conference
• プリカーサ法によって作製したポーラス鉄の加熱時間，加熱温度が発泡へ及ぼす影響, 青木智史，半谷禎彦，松原雅昭，鈴木良祐，三ツ木寛尚, May 2021, 315, 316, Summary national conference

Presentations

• ハーバート硬さ試験のマツバラ硬さに及ぼす初期角度の影響, 多賀谷 拓，Hazriq Aiman Bin Khairul Emran，鈴木良祐，松原雅昭, 第300回材料試験技術シンポジウム, 23 Oct. 2024, 23 Oct. 2024, 23 Oct. 2024
• 規格化を見据えたハーバート硬さ試験方法の検討, 多賀谷拓，鈴木良祐，松原雅昭, 日本非破壊検査協会 2024 年度 秋季講演大会, 08 Nov. 2024, 07 Nov. 2024, 08 Nov. 2024
• ADC12ダイカスト/SS400鋼摩 擦攪拌接合体のポーラス化を利用した易分離におけるガス欠陥の活用, 石貝拓磨，半谷禎彦，鈴木良祐，小山真司，森貞好昭，藤井英俊，吉川暢宏, 日本鋳造工学会 第 185回全国講演大会, 24 May 2025, 24 May 2025, 25 May 2025
• ADC12アルミニウム合金/ C1100銅の摩擦攪拌接合体のポーラ ス化による易分離, 仲原大河，半谷禎彦，鈴木良祐，西田進一，岩崎篤，森貞好昭，藤井 英俊, 日本鋳造工学会 第 185回全国講演大会, 24 May 2025, 24 May 2025, 25 May 2025
• 縦型双ロールキャスターで作製し た発泡剤シートによるA1050アルミニウム /SS400鋼接合体の発泡分離および再接合, 山本凌雅，半谷禎彦，鈴木良祐，西田進一，森貞好昭，藤井英俊, 日本鋳造工学会 第 185回全国講演大会, 24 May 2025, 24 May 2025, 25 May 2025
• ロストワックス遠心鋳造法を 用いた発泡アルミニウム作製, 萩原尊，鈴木良祐, 日本鋳造工学会 第 185回全国講演大会, 24 May 2025, 24 May 2025, 25 May 2025
• Development and investigation of availability of stand-alone type Herbert hardness tester, Ryosuke SUZUKI Kazuki MURAKAMI Takumi TAGAYA Masaaki MATSUBARA Tetsushi KABURAGI, 第300回材料試験技術シンポジウム, 23 Oct. 2024, 23 Oct. 2024, 23 Oct. 2024
• ロストワックス遠心鋳造法を用 いた小型複雑形状発泡アルミ ニウムの作製, 萩原尊，鈴木良祐, ⼀般社団法⼈ 軽⾦属学会 第 147 回秋期⼤会プログラム, 09 Nov. 2024, 08 Nov. 2024, 10 Nov. 2024
• 無攪拌溶湯プリカーサ法を用 いた連続鋳造によるポーラス アルミニウムの作製, ケプラー仁，鈴木良祐，佐藤隼，西田進一， 半谷禎彦, ⼀般社団法⼈ 軽⾦属学会 第 147 回秋期⼤会プログラム, 09 Nov. 2024, 08 Nov. 2024, 10 Nov. 2024
• 局所加熱発泡補修したポーラ スアルミニウムの補修強度に 及ぼす加熱時間の影響, 伊藤勇人，鈴木 良祐，半谷禎彦，大木涼 介，小林重昭，三 田一也, ⼀般社団法⼈ 軽⾦属学会 第 147 回秋期⼤会プログラム, 09 Nov. 2024, 08 Nov. 2024, 10 Nov. 2024
• 無攪拌溶湯プリカーサ法を用いた 連続鋳造によるポーラスアルミニウムの作製, ケプラー仁, 鈴木良祐, 佐藤隼, 西田進一, 半谷禎彦, 2024年度日本金属学会秋期（第175回）講演大会, 20 Sep. 2024
• ロストワックスインベストメント遠心鋳造によるポーラスアルミニウムの作製, 鈴木良祐, 萩原尊, 軽金属学会146回講演大会, 12 May 2024
• 手袋素材に対して医療用注射針の 貫通・非貫通を加速度により判別可能な 振子式耐突刺性検証装置の開発, 川村虹太, 鈴木良祐, 松原雅昭, 多々清爾, 2024年度材料学会第73期学術講演会, 25 May 2024
• ロストワックス遠心鋳造法を用いた 小型発泡アルミニウム作製, 萩原尊，鈴木良祐, 日本鋳造工学会 第183回全国講演大会, 26 May 2024
• Form repairing process for aluminum foams using optical heating and strength evaluation of aluminum foams after the repair, 伊藤勇人, 鈴木良祐, 軽金属学会146回講演大会, May 2024
• 非破壊振子式硬さ試験機, 鈴木良祐，松原雅昭, 第13回おおた研究・開発フェア, 26 Oct. 2023, 26 Oct. 2023, 27 Oct. 2023, Japanese
• IoT compatible nondestructive pendulum type hardness tester, R. Suzuki, M. Matsubara, K. Murakami, T. Tagaya, G7, 30 Apr. 2023, 29 Apr. 2023, 30 Apr. 2023, English
• TIGアークを用いた局所加熱によるポーラスアルミニウムの発泡補修, 鹿沼優人，鈴木良祐，半谷禎彦，藤井英俊, 軽金属学会関東支部 2023 年度 第9回若手研究者ポスター発表会, 20 Oct. 2023, 20 Oct. 2023, 20 Oct. 2023
• 自立測定可能なハーバート硬さ試験機, 多賀谷拓，鈴木良祐，松原雅昭，鏑木哲志, 非破壊検査協会 2023年度 秋季講演大会, 05 Oct. 2023, 05 Oct. 2023, 05 Oct. 2023
• 熱応力緩和型Ni/PSZ系傾斜機能材料の創製と室温下での引張強度評価, 濱田竜成，鈴木良祐，松原雅昭, 日本材料試験技術協会 第296回材料試験技術シンポジウム, 27 Oct. 2023, 27 Oct. 2023, 27 Oct. 2023
• ものづくりにおける IoT 活用の研究(切削加工における熟練技能のデジタル化), 〇宮木康輔，鏑木哲志，鈴木良祐，松原雅昭, 群馬ブロック研究・技術交流会2023, 20 Dec. 2023, 20 Dec. 2023, 20 Dec. 2023
• 人を育てる循環が築く 世代を超えた 機械工学教育, 鈴木 良祐，座間 淑夫，小山 真司，荒木 幹也，山田 功, 日本機械学会2022年度技術と社会部門講演会 技術と社会の関連を巡って：過去から未来を訪ねる, 03 Dec. 2022
• 溶湯直接圧延を用いたポーラスアルミニウム製作 における発泡剤添加量の影響, ,, 日本機械学会関東支部 群馬ブロック 研究・技術交流会 2022, 21 Dec. 2022
• ADC12/SS400接合体のADC12内在ガスを用いたポーラス化による分離, 増田敦哉，半谷禎彦，鈴木良祐，松原雅昭，藤井英俊，青木祥宏, 日本鋳造工学会第180回全国講演大会, 29 Sep. 2022
• 圧縮および摩擦攪拌法を用いたポーラスアルミニウムの再発泡法, 髙木樹，半谷禎彦，増田敦哉，鈴木良祐，松原雅昭, 軽金属学会第143回秋期大会, Nov. 2022
• A1050/SS400接合体の接合面への発泡剤添加によるポーラス化を用いた分離の検討, 増田敦哉，半谷禎彦，鈴木良祐，松原雅昭，藤井英俊，青木祥宏, 第73回塑性加工連合講演会, Nov. 2022
• 添加粉末がプリカーサ法を用いて作製したポーラス鉄の発泡時に及ぼす影響, 青木智史，半谷禎彦，松原雅昭，鈴木良祐，坂本広太, 第73回塑性加工連合講演会, Nov. 2022
• 初期発泡後の未分解発泡剤を活用したポーラスアルミニウムの再発泡, 髙木樹，半谷禎彦，鈴木良祐, 軽金属学会第144回春期大会, May 2023
• 自立測定可能な振子式硬さ試験機の開発, 鈴木 良祐，村上 一輝，松原 雅昭，鏑木 哲志, 日本機械学会 2022年度年次大会, 13 Sep. 2022
• 鋳造を利用したプリカーサ法における溶湯への増粘剤粒子添加方法の検討, 鈴木良祐，松原雅昭，半谷禎彦，荘司郁夫，藤井英俊, 日本鋳造工学会第177 回全国講演大会, May 2021, 22 May 2021, 23 May 2021, Domestic conference
• Herbert Hardness Test using Accelerometer for Swing Angle Detection, Ryosuke Suzuki, Tetsushi Kaburagi, Haruka Maruhashi, Yoshiki Ishikawa, Kazuki Murakami, Hironao Mitsugi, Masayoshi Nakamura, Masaaki Matsubara, SEM Annual 2021 Virtual Conference, 16 Jun. 2021, 14 Jun. 2021, 17 Jun. 2021, English
• 溶湯直接圧延を用いたプリカーサ法によるポーラスアルミニウムの作製, 10 Nov. 2018
• 溶湯直接圧延を利用したポーラスアルミニウムコアサンドイッチの開発, 鈴木良祐, 茂木稜典, 西田進一, 松原雅昭, 荘司郁夫, 20 Mar. 2019
• Repair of Aluminum Foam using foaming of Al-Si Precursor, 鈴木良祐, 浅川友祐, 松原雅昭, 半谷禎彦, 荘司郁夫, 藤井英俊, 公益社団法人日本金属学会2021年春期第168回講演大会, 19 Mar. 2021, 16 Mar. 2021, 19 Mar. 2021, Japanese, Domestic conference
• 発泡補修における補修部材の気孔率制御, *鈴木良祐，浅川友祐，松原雅昭，半谷禎彦，莊司郁夫，藤井英俊, 軽金属学会第140回春期大会, 16 May 2021, 15 May 2021, 16 May 2021, Japanese, Domestic conference
• マイコンを搭載したIoT対応非破壊振子式硬さ試験機, *鈴木 良祐, 松原 雅昭, イノベーション・ジャパン2020～大学見本市 Online, 28 Sep. 2020, 2020, 30 Nov. 2020, Japanese, Japan, Domestic conference
• Evaluation for Tensile Characteristics of Steel by Herbert Hardness Test, *鈴木 良祐, 松原 雅昭, 丸橋 悠, 2019年度 年次大会, 09 Sep. 2019, 08 Sep. 2019, 11 Sep. 2019, Japanese, Akita, Japan, Domestic conference
• Pendulum type hardness tester for ealuating mechanical properties of a special shape sample, *鈴木 良祐, 松原 雅昭, 三ツ木寛尚, イノベーション・ジャパン2019～大学見本市＆ビジネスマッチング～, 29 Aug. 2019, 29 Aug. 2019, 30 Aug. 2019, Japanese, Japan, Domestic conference
• Pendulum type hardness tester for ealuating mechanical properties of a special shape sample, *鈴木 良祐, 松原 雅昭, 三ツ木寛尚, イノベーション・ジャパン2018～大学見本市＆ビジネスマッチング～, 30 Aug. 2018, 30 Aug. 2018, 31 Aug. 2018, Domestic conference
• ハーバート硬さ試験による刃先の硬さ評価, 材料試験技術協会, 2018
• ハーバート硬さ試験を利用した包丁の刃先の硬さ評価, 第25回茨城講演会, 2017
• ハーバート硬さ試験を用いた刃先の硬さ評価, 日本機械学会 2017年度年次大会, 2017
• 炭酸リチウムを発泡剤とした鋳造プリカーサ法によるポーラスアルミニウムの作製, 日本金属学会, 2017
• Evaluation and Discussion of Material strength of Flat Bar in TETRIX for Design and Manufacture of Demonstration Equipment for Automatic Control Theory, ECTI-CON 2017, 2017
• 摩擦圧接によるダイカスト廃材を利用したADC12ポーラスAl/SUS304薄肉, 日本金属学会2017年秋期(第161回）講演大会, 2017
• 炭酸リチウムを発泡剤とした鋳造プリカーサ法によるポーラスアルミニウムの作製, 日本金属学会2017年(第161回)秋期講演大会, 2017
• Evaluation and Discussion of Material strength of Flat Bar in TETRIX for Design and Manufacture of Demonstration Equipment for Automatic Control Theory, ECTI-CON 2017, 2017
• EFFECTS OF WEIGHT HERBERT PENDULUM ON HARDNESS EVALUATIONS, NEW METHODS OF DAMAGE AND FAILURE ANALYSIS OF STRUCTURAL PARTS, 2016
• 軸力と曲げを受ける切欠付ステンレス鋼配管の破断前漏洩および最大応力の評価, 日本材料学会 関東支部 学生研究交流会, 2016
• ハーバート硬さ試験機の実用化に関する研究(第一報：減衰硬さとブリネル硬さの関係), 第267回材料試験技術シンポジウム, 2016
• ハーバート硬さ試験を用いた金属および非金属の硬さ評価, 2016
• 直接溶湯圧延を利用したポーラスアルミニウムの作製, 第24回機械材料・材料加工技術講演会, 2016
• 直接圧延プリカーサ法によるポーラスアルミニウム作製, 軽金属学会第131回秋期大会, 2016
• ハーバート硬さ試験における減衰硬さにおよぼす試験荷重の影響, 日本機械学会 2016年度茨城講演会, 2016
• Mechanics of Herbert pendulum Hardness Tester and its Application, NEW METHODS OF DAMAGE AND FAILURE ANALYSIS OF STRUCTURAL PARTS, 2016
• 鋳造プリカーサ法によるポーラスアルミニウムの製作, 日本材料学会 関東支部 学生研究交流会, 2016
• 段階的組成傾斜を有する熱応力緩和型傾斜機能材料の創製と評価, 日本材料学会 関東支部 学生研究交流会, 2016
• 古代セラミックスとしての縄文土器材料の強度評価, 日本材料学会 関東支部 学生研究交流会, 2016
• 脆性および延性材料のハーバート硬さ試験, 日本材料学会 関東支部 学生研究交流会, 2016
• モーションキャプチャを利用した刃物用振子式硬度計, 桐生市発明協会 第58回桐生市発明考案展覧会, 2016
• ハーバート硬さ試験機, JIMA2016 総合検査機器展, 2016
• EFFECTS OF WEIGHT HERBERT PENDULUM ON HARDNESS EVALUATIONS, NEW METHODS OF DAMAGE AND FAILURE ANALYSIS OF STRUCTURAL PARTS, 2016
• Mechanics of Herbert pendulum Hardness Tester and its Application, NEW METHODS OF DAMAGE AND FAILURE ANALYSIS OF STRUCTURAL PARTS, 2016
• フラックスを利用したポーラスアルミニウムの発泡接合, 日本機械学会, 2015
• 低融点プリカーサの発泡を用いたポーラスアルミニウムの接合, 2015
• 鋳造プリカーサ法によるポーラスアルミニウムの創製とその圧縮特性, M&M2015 材料力学カンファレンス, 2015
• Collapse evaluation of double notched stainless pipes subjected to combined tension and bending, NEW METHODS OF DAMAGE AND FAILURE ANALYSIS OF STRUCTURAL PARTS, 2014
• Collapse evaluation of double notched stainless pipes subjected to combined tension and bending, NEW METHODS OF DAMAGE AND FAILURE ANALYSIS OF STRUCTURAL PARTS, 2014
• ECAP を用いたアルミニウム箔端材再利用によるポーラスアルミニウムの作製, 軽金属学会, 2013
• Load History Dependency of Plastic Collapse Behavior of Cracked Piping, SEM XII International Congress & Expositionon Experimental & Applied Mechanics, 2012
• 拡散接合法で作製されたプリカーサの発泡挙動に及ぼすAl2O3粒子添加の影響, 日本金属学会, 2012
• Load History Dependency of Plastic Collapse Behavior of Cracked Piping, SEM XII International Congress & Expositionon Experimental & Applied Mechanics, 2012
• 積層型プリカーサより作製されるポーラスアルミニウムの気孔率におよぼすプリカーサ作製プロセス中に与えたひずみの影響, 日本金属学会, 2011
• 板材からの高気孔率ポーラスアルミニウムの作製, 軽金属学会, 2011
• Effect of layered microstructure of the aluminum precursor manufactured from sheet material on the foaming behavior, The ７th International Conference on Porous Metals and Metallic Foams, 2011
• Effect of layered microstructure of the aluminum precursor manufactured from sheet material on the foaming behavior, The ７th International Conference on Porous Metals and Metallic Foams, 2011
• Modeling for anisotropic foaming of aluminum precursor, 12th International Conference on Aluminum and Alloys, 2010
• 粉末と板材から作製されたポーラスアルミニウムプリカーサの発泡挙動の比較, 日本金属学会, 2010
• アルミニウムプリカーサの発泡挙動の解明, 高温強度と組織形成の材料科学研究会, 2010
• アルミニウムプリカーサの異方的固相発泡挙動のモデル解析, 日本金属学会, 2010
• Modeling for anisotropic foaming of aluminum precursor, 12th International Conference on Aluminum and Alloys, 2010
• Effect of texture in aluminum alloy precursor on the expansion anisotropy, 6th International Conference on Porous Metals and Metallic Foams, 2009
• アルミニウムプリカーサの発泡挙動に及ぼす加工ひずみの影響, 日本金属学会, 2009
• Effect of texture in aluminum alloy precursor on the expansion anisotropy, 6th International Conference on Porous Metals and Metallic Foams, 2009
• Design of anisotropic metal foams for thermal insulator, 5th International Conference on Porous Metals and Metallic Foams, 2007
• Design of anisotropic metal foams for thermal insulator, 5th International Conference on Porous Metals and Metallic Foams, 2007
• 光加熱を用いたポーラスアルミニウムの発泡補修, 伊藤勇人，鈴木良祐, 群馬ブロック研究・技術交流会2023, 20 Dec. 2023, 20 Dec. 2023, 20 Dec. 2023
• 溶湯直接圧延法を用いて製作したポーラスアルミニウムの気孔形態に及ぼすTiH2添加量の影響, 藤原敬士，鈴木良祐，松原雅昭，簾谷竜平, 日本材料試験技術協会 第296回材料試験技術シンポジウム, 27 Oct. 2023, 27 Oct. 2023, 27 Oct. 2023
• ハーバート硬さ試験機を用いた液体の粘度測定, 〇岩水海里，鈴木良祐，松原雅紹，多賀谷拓, 群馬ブロック研究・技術交流会2023, 20 Dec. 2023, 20 Dec. 2023, 20 Dec. 2023, Japanese

Industrial Property Rights

• Patent right, 特願2024-066741, 17 Apr. 2024, Gunma University, Osaka Unibersity
• Patent right, -

Awards

• Yokoyama Award, R.Suzuki, Gunma University School of Science and Technology Graduate School of Science and Technology, 21 Sep. 2022, Others, Japan
• Dec. 2020, Others, Japan
• Nov. 2020, Others, Japan
• Aug. 2016, Japan society, Japan
• 2016, Others, Japan
• Nov. 2016, Others, Japan
• Sep. 2013, Japan society, Japan

Academic Contribution

• Academic society etc, 01 Apr. 2021, 31 Mar. 2022
• Academic society etc, 07 Nov. 2020, 07 Nov. 2020
• Academic society etc, 10 Nov. 2018, 10 Nov. 2018
• Competition etc, 01 Apr. 2020, 31 Mar. 2022, Not contributing to international academic
• Competition etc, 01 Apr. 2019, 31 Mar. 2020, Not contributing to international academic

Educational Activities

Awards

• May 2022, Others, Japan
• Apr. 2023, Japan society, Japan
• 22 Dec. 2021, Others, Japan
• 24 May 2022, Others, Japan
• Aug. 2020, Others, Japan
• Jul. 2018, Others, Japan
• Jul. 2015, Others, Japan
• 31 Mar. 2022, Others, Japan

Social Contribution

Social Contribution

• リカレント教育(3DCAD超入門), Gunma Univeristy, 28 Aug. 2023, 01 Sep. 2023, Gunma University Ohta Campus, Lecture, Lecture on the basics of 3D CAD as recurrent education.　(Target:　College students, Graduate students, Teachers, Guardians, Researchers, General, Company)
• 桐生高校SSHにおける高校生の指導, 15 Jun. 2021, 15 Jun. 2021　(Target:　High school students)
• 2021年4月~2022年3月_群馬地区技術交流研究会（事務局・HP運営）, 01 Apr. 2021, 31 Mar. 2022
• アースデイin桐生実行委員会, 01 Apr. 2021, 31 Mar. 2022
• アースデイin桐生実行委員会, 01 Apr. 2020, 31 Mar. 2020, Festival　(Target:　General)
• 2020年4月~2021年3月_群馬地区技術交流研究会（事務局・HP運営）, 01 Apr. 2020, 31 Mar. 2020　(Target:　Researchers, General, Company)
• リカレント教育桐生工作実習担当, 2019, 2019　(Target:　General)
• 桐生高校SSHにおける高校生の指導, 01 Sep. 2013, 31 Jul. 2014, Research advise　(Target:　High school students)
• 栃木高校SSHにおける高校生の指導, 01 May 2013, 31 May 2015　(Target:　High school students)
• アースデイin桐生実行委員会委員, Earth Day in Kiryu Executive Committee, 01 Apr. 2023, 31 Mar. 2024, Gunma University Kiryu campus & Yui in Kiryu station, Festival　(Target:　Infants, Schoolchildren, Junior high school students, High school students, College students, Graduate students, Guardians, General, Civic organization)
• 2023年4月~2024年3月_群馬地区技術交流研究会（事務局・HP運営）, Gunma Regional Research Organization for Cooperation, 01 Apr. 2023, 31 Mar. 2024, Gunma University Kiryu Campus, Others, I am in charge of the secretariat of the Gunma Regional Research Organization for Cooperation, one of the subcommittees of the Hikalo. Specifically, I assist in the operation of the board of directors meetings, which are held about three times a year, in the operation of lecture meetings, and in the management and operation of the website.　(Target:　College students, Graduate students, Teachers, Researchers, General, Scientific organization, Company, Civic organization, Governmental agency)
• アースデイin桐生実行委員会委員, Earth Day in Kiryu Executive Committee, 01 Apr. 2024, 31 Mar. 2025, Gunma University Kiryu campus & Yui in Kiryu station, Festival　(Target:　Infants, Schoolchildren, Junior high school students, High school students, College students, Graduate students, Guardians, General, Civic organization)
• 2024年4月~2025年3月_群馬地区技術交流研究会（事務局・HP運営）, Gunma Regional Research Organization for Cooperation, 01 Apr. 2024, 31 Mar. 2025, Gunma University Kiryu Campus, Others, I am in charge of the secretariat of the Gunma Regional Research Organization for Cooperation, one of the subcommittees of the Hikalo. Specifically, I assist in the operation of the board of directors meetings, which are held about three times a year, in the operation of lecture meetings, and in the management and operation of the website.　(Target:　College students, Graduate students, Teachers, Researchers, General, Scientific organization, Company, Civic organization, Governmental agency)

Academic Contribution

• 第147回秋期大会実行委員, Competition etc, 01 Oct. 2023, 31 Dec. 2024
• JSME群馬ブロック幹事, Academic society etc, 01 Mar. 2022, 28 Feb. 2023
• 日本材料試験技術協会　理事業務, 01 Apr. 2020, 31 Mar. 2021
• 軽金属学会大会運営委員会, Competition etc, 01 Apr. 2020, 31 Mar. 2021
• Director, Material testing research association of Japan, Academic society etc, Material testing research association of Japan, 01 Apr. 2022, 31 Mar. 2023
• Steering Committee for the Japan Institute of Light Metals Conference, Competition etc, Japan Institute of Light Metals, 01 Apr. 2024, 31 Mar. 2025, Participation in the Convention Steering Committee
• Steering Committee for the Japan Institute of Light Metals Conference, Competition etc, Japan Institute of Light Metals, 01 Apr. 2022, 31 Mar. 2023, Participation in the Convention Steering Committee
• Director, Material testing research association of Japan, Academic society etc, Material testing research association of Japan, 01 Apr. 2023, 31 Mar. 2024
• Director, Material testing research association of Japan, Academic society etc, Material testing research association of Japan, 01 Apr. 2024, 31 Mar. 2025
• Committee member, YFE Committee of Japan Foundry Engineering Society, Competition etc, Japan Foundry Engineering Society, 01 Apr. 2024, 31 Mar. 2025, Participation in the Convention Steering Committee Event Operations

Media Coverage

• こども科学体験教室, Other than myself, 26 Nov. 2021
• こども科学体験教室, Other than myself, 19 Feb. 2024, Paper