Department of Electronics and Infomatics, Mathematics and Physics, Professor

Gunma University

1999, Utsunomiya University, Graduate School of Engineering

Institute of Electrical and Electronics Engineers (IEEE)

SICE

The Institute of Electrical Engineers of Japan

2016, Gunma University, Prof lv

1996, 1999

1999, 2000, Utsunomiya University

2000, 2002, National Institute of Technology, Oyama College, Department of Mechanical Engineering

2004

2013

1996, 1999, Research Fellow of the Japan Society for the Promotion of Science

1999, 2000, SVBL Researcher for Utsunomiya University

2000, 2002, Research Associate, Dept. of Mechanical Eng., Oyama National College of Technology

Manufacturing technology (mechanical, electrical/electronic, chemical engineering), Control and systems engineering

Manufacturing technology (mechanical, electrical/electronic, chemical engineering), Control and systems engineering

Motion Control

Robust Control

Precise Positioning

System Identification

Engine Control

Renewable Energy

Vibration Power Generation

Motion Control, Robust Control, Precise Positioning, System Identification, Engine Control, Renewable Energy, Vibration Power Generation

Intelligent Identification Method of Low Voltage AC Series Arc Fault Based on using Residual Model and Rime Optimiza-tion Algorithm, Xiao He, Takahiro Kawaguchi, and Seiji Hashimoto, Sep. 2024, Energies, 17, 4675, 1, 22, Scientific journal

Adaptive QSMO-Based Sensorless Drive for IPM Motor with NN-Based Transient Position Error Compensation, Linfeng Sun, Jiawei Guo, Xiongwen Jiang, Takahiro Kawaguchi, Seiji Hashimoto, and Wei Jiang, Aug. 2024, Electronics, 13, 2085, 1, 24, Scientific journal

Analyses of Roll Damping Coefficients in Hypersonic Rarefied Flows, T. Ozawa, M. Shinkai, N. Kurita, and S. Hashimoto, Aug. 2024, Journal of Evolving Space Activities, 2, 151, 1, 7, Scientific journal

Enhanced Mobile Robot Odometry with Error Kalman Filtering Incorporating 3D Point Cloud Intensity, Xiongwen Jiang, Taiga Kuroiwa, Haolan Zhang, Takato Yoshida, Linfeng Sun, Yu Cao, Haohao Zhang, Takahiro Kawaguchi, and Seiji Hashimoto, Jul. 2024, IEEE Access, 12, 103676, 103686, Scientific journal

Zero-Power Control Strategy and Dynamics Enhancement for Hybrid Maglev Conveyor Carts, Xiaowei Tang, Seiji Hashimoto, Takahiro Kawaguchi, and Nobuyuki Kurita, Jul. 2024, Electronics, 13, 2921, 1, 15, Scientific journal

Real-time Simulation System for Small Scale Regional Integrated Energy Systems, Wei Jiang, Renjie Qi, Song Xu, and Seiji Hashimoto, Jun. 2024, Energies, 17, 13, 1, 25, Scientific journal

Neural Network Compensator-Based Control for Enhancing IPMSM Dynamics and Copper Loss Efficiency for Air Compressor, Jiawei Guo, Linfeng Sun, Takahiro Kawaguchi, and Seiji Hashimoto, May 2024, IEEE Access, 12, 62986, 62996, Scientific journal

Synthesis and Control of a Three-port LCL Resonant Wireless Power Transfer System for DC Energy Conversion Applications, Song Xu, Wei Jiang, and Seiji Hashimoto, Jul. 2024, IEEE Trans. on Power Electronics, 39, 7, 8916, 8927, Scientific journal

Development of A Conveyor Cart with Magnetic Levitation Mechanism Based on Multi Control Strategies, Xiaowei Tang, Seiji Hashimoto, Kurita Nobuyuki, Takahiro Kawaguchi, Eiji Ogiwara, Nobuya Hishinuma and Keisuke Egura, Jul. 2024, Applied Sciences, 13, 19, 1, 16, Scientific journal

A Novel Voltage-Current Dual-Drop Control Method for Shipboard DC Micro-Grid with Energy Storage Systems, Xun Chen, Rui Tian, Yonghong Wang, Song Xu, Wei Jiang, and Seiji Hashimoto, Apr. 2024, IEEE Access, 12, 62912, 62996, Scientific journal

Multi-port Energy Router for DC Grid Clusters, Linfeng Sun, Takahiro Kawaguchi, Seiji Hashimoto, and Wei Jiang, Apr. 2024, IEEE Journal of Emerging and Selected Topics in Power Electronics (JESTPE), 12, 2, 1666, 1682, Scientific journal

Research on the Construction of Intelligent Robot Path Recognition System Supported by Deep Learning Network Algorithm, Ni Kan, Cao Yu, Jiang Xiongwen, Zhang Haolan, Seiji Hashimoto, Ni Qiyu, Jan. 2024, Applied Mathematics, 9, 1, 1, 17, Scientific journal

Design and Analysis of a Step-Up Multi-Port Converter Applicable for Energy Conversion in Photovoltaic Battery Systems, Siyuan Shi, Song Xu, Wei Jiang and Seiji Hashimoto, Dec. 2023, Energies, 17, 1, 1, 18, Scientific journal

Design and Implementation of Low-Voltage Photovoltaic System Integrated with Battery Energy Storage, Xiao He, Seiji Hashimoto, Wei Jiang, Jicheng Liu, Takahiro Kawaguchi, Mar. 2023, Energies, 16, 7, 1, 20, Scientific journal

A Dynamic and Parallel Two-Stage Lossless Data Compression Method for Smart Grid, Yanxia Wu, Song Xu, Caiping Xi, Pengqiang Nie, Wei Jiang, and Seiji Hashimoto, Jan. 2023, IEEE Access, 11, 143475, 143485, Scientific journal

Online MTPA Control of IPM Motor Using NN-based Perturb and Observe Algorithm, Linfeng Sun, Jiawei Guo, Takahiro Kawaguchi, Seiji Hashimoto, and Wei Jiang, IEEE Access, 11, 122458, 122469, Scientific journal

Very-Low-Cost Powered Air-Purifying Respirator (PAPR) “Distancing-Free Mask Industry (DFM-I) Prototype No.1” and Proposal for a Lockdown-Free Industry, Edwin Carcasona, Ronald M. Galindo, Akihiro Takita, Ethelda Magalang, Tabetha S. Galindo, Seiji Hashimoto, Takao Yamaguchi, Edgar U. Tibay, Dongwei Shu, Haruo Kobayashi, Kenji Amagai, Naoya Ohta, Noriaki Yoshiura, Anna Kuwana, Ayako Yano, and Yusaku Fujii, May 2022, Journal of Technology and Social Science, 6, 2, 1, 4, Scientific journal

タグチメソッドを用いたIPMモータのトルク最適設計, 高田晃多，石川赴夫，橋本誠司，鈴木伸, 2022, 30, 2, Scientific journal

Low-Cost Powered Air-Purifying Respirator (PAPR) “Distancing-Free Mask Frontline (DFM-F) Prototype No.1” for the Operational Tests in Hospitals in Cebu City, Philippines, Ronald M. Galindo, Akihiro Takita, Edwin Carcasona, Ethelda Magalang, Tabetha S. Galindo, Seiji Hashimoto, Takao Yamaguchi, Edgar U. Tibay, Dongwei Shu, Haruo Kobayashi, Kenji Amagai, Naoya Ohta, Noriaki Yoshiura, Anna Kuwana, Ayako Yano, and Yusaku Fujii, May 2022, Journal of Mechanical and Electrical Intelligent System, 5, 2, 1, 6, Scientific journal

Recurrent Neural Network-based Temperature Control System Weight Pruning based on Nonlinear Reconstruction Error, Yuan Liu, Takahiro Kawaguchi, Song Xu and Seiji Hashimoto, 2022, Processes, 10, 44, 1, 15, Scientific journal

A Hardware-in-the-Loop-on-Chip Development System for Teaching and Development of Dynamic Systems, Wei Jiang, Linfeng Sun, Yan Chen, Hainin Ma and Seiji Hashimoto, Aug. 2021, Electronics, 10(7), 801, 1, 15

An engineering approach for fighting COVID-19; Pseudo herd immunity through the complete spread of the helmet-type masks, Y. Fujii, Apr. 2021, Journal of Mechanical and Electrical Intelligent System, 4, 1, 1, 5

Model Predictive Torque Control of Interior Permanent Magnet Synchronous Motor powered by Three-phase Four-switch Voltage-source Inverter, Ting Yang, 2021, International Core Journal of Engineering, 7, 4, 455, 461

Control design applicable to a helmet type full-face mask, S. Xu, Y. Cao, S. Hashimoto, Y. Fujii, A. Takita, W. Jiang, Oct. 2020, Journal of Technology and Social Science, 4, 3, 24, 30

A Reference-model-based Neural Network Control Method for Multi-input Multi-output Temperature Control System, Yuan Liu, Song Xu, Seiji Hashimoto and Takahiro Kawaguchi, Oct. 2020, Processes, 8, 1365, 1, 17

Switching Sequence Model Predictive Direct Torque Control of IPMSM for EV in Switch Open-circuit Fault-tolerant Mode, Ting Yang, Takahiro Kawaguchi, Seiji Hashimoto, Wei Jiang, Oct. 2020, Energies, 11, 5593, 1, 15

A Helmet Type Mask "Distancing-Free Mask": An Engineering Solution that Eliminates the Lockdown, Y. Fujii, A. Takita and S. Hashimoto, Sep. 2020, Journal of Mechanical and Electrical Intelligent System, 3, 3, 1, 7

ウイルスをほぼ完全に遮蔽できるマスクの開発，および，ロックダウンを不要化する社会基盤の提案, 藤井雄作，田北啓洋，橋本誠司, Sep. 2020, 4, 1, 6, 10

Low-sampling rate data-based failure diagnosis by using self-powered system, Shintaro Okada, Seiji Hashimoto and A A Basari, Jun. 2020, Journal of Physics: Conference Series, 1502, 1, 1, 7

Development of a PZT device-based power-generating shoes for disaster-affected areas, S. Tsukagoshi, K. Seto, S. Hashimoto and A. Basari, Jun. 2020, Journal of Physics: Conference Series, 1502, 1, 1, 8

A Reference-Model-Based Artificial Neural Network Approach for Temperature Control System, Song Xu, Seiji Hashimoto, Yuqi Jiang, Katsutoshi Izaki, Takeshi Kihara, Ryota Ikeda and Wei Jiang, Jan. 2020, Processes, 8, 1, 1, 11

Pole-Zero Cancellation Method for Multi Input Multi Output (MIMO) Temperature Control in Heating Process System, Song Xu,Seiji Hashimoto,Wei Jiang, Aug. 2019, Processes, 7, 8

Slow Mode-Based Control Method for Multi-Point Temperature Control System, Song Xu,Seiji Hashimoto,Wei Jiang,Yuqi Jiang,Katsutoshi Izaki,Takeshi Kihara,Ryota Ikeda, Aug. 2019, Processes, 7, 8

Design and Implementation of a Low Power Low Cost Digital Current-Sink Electronic Load, Wei Jiang,Jieyun Wang,Qianlong Wang,Song Xu,Seiji Hashimoto,Zhong Liu, Jul. 2019, Energies, 12, 2644

Analysis and Design of Air-coupled DC Transformer with Hybrid Modulation Control Method, Song Xu,Wei Jiang,Seiji Hashimoto, Jul. 2019, Energies, 12, 2570

A Torque-Sensorless Viscometer for Food Processing Applications, Y. Jiang,S. Hashimoto,Y. Yamakoshi,T. Otomo, Feb. 2019, Applied Mechanics and Materials, 888

Disturbance Compensation in Slow-Mode Based Control for MIMO Delay System, Y. Jiang,L. Yuan,S.Xu,K. Yoshida,S. Hashimoto,K. Izaki,T. Kihara,R. Ikeda,W. Jiang, Nov. 2018, Journal of Technology and Social Science (JTSS), 2, 3

Investigation and experimental verification of the effectiveness of the interfaced plate parameters on impact-based piezoelectric energy harvester, N. X. Yan,A. A. Basari,K. S. Leong,N. A. A. Nawir,S. Hashimoto, Oct. 2018, Ceramics International, 44, 15

1入力2出力SMC適用によるEPS制御の高性能化, 阿部 己和,橋本 誠司,梶谷 満信, Apr. 2018, 138, 4

A REVIEW ON PIEZOELECTRIC ENERGY HARVESTER AND ITS POWER CONDITIONING CIRCUIT, Nur Amalina,Ahmad Nawir,Amat Amir Basari,Mohd Shakir,Md. Saat,Ng Xue Yan,Seiji Hashimoto, Apr. 2018, ARPN Journal of Engineering and Applied Sciences, 13, 3

Evaluation of Interfaced Plate Parameters on Impact-Based Piezoelectric Power Generation, N. X. Yan,A. A. Basari,K. S. Leong,N. A. A. Nawir,S. Hashimoto, Apr. 2018, Journal of Telecommunication, Electronic and Computer Engineering, 10, 2

DC Micro-Grid Contactless Power Supply System with Active Load Detecting Control Method, Song Xu,Seiji Hashimoto,Wei Jiang, Mar. 2018, Journal of Technology and Social Science, 2, 2

Electric Power Steering System Design Based on Linear Quadratic Control, T. Abe,Y. Fujimura,T. Hirose,S. Hashimoto,M. Kajitani,K. Sato,K. Gonpei, May 2017, Journal of Technology and Social Science, 1, 2

An Observer Design Strategy in Electric Power Steering System, Jingying Lu,Wei Jiang,Tomokazu Abe,Yu Fujimura,Seiji Hashimoto,Mitsunobu Kajitani, May 2017, Journal of Technology and Social Science, 1, 2

High Power Output of L-shape PZT Power Generator Working in Bending-Shear Mode, A. A. Basari,S. Hashimoto, Jan. 2017, Journal of Telecommunication, Electronic and Computer Engineering, 9, 1

Design and optimization of a wideband impact mode piezoelectric power generator, A. A. Basari,S. Hashimoto,B. Homma,H. Okada,H. Okuno,S. Kumagai, May 2016, CERAMICS INTERNATIONAL, 42, 6, 6962, 6968, Scientific journal

Study of the effect of mechanical impact parameters on an impact-mode piezoelectric ceramic power generator, Arnat Arnir Basari,Sosuke Awaji,Shintaro Sakamoto,Seiji Hashimoto,Bunji Homma,Kenji Suto,Hiroaki Okada,Hideki Okuno,Kojiro Kobayashi,Shunji Kumagai, Nov. 2015, CERAMICS INTERNATIONAL, 41, 9, 12038, 12044, Scientific journal

The Effect of the Parameters of a Vibration-Based Impact Mode Piezoelectric Power Generator, Amat A. Basari,S. Awaji,S. Sakamoto,S. Hashimoto,B. Homma,K. Suto,H. Okada,H. Okuno,K. Kobayashi,S. Kumagai, 2015, SHOCK AND VIBRATION, Scientific journal

Shape Effect of Piezoelectric Energy Harvester on Vibration Power Generation, A. A. Basari,S. Awaji,S. Wang,S. Hashimoto,S. Kumagai,K. Suto,H. Okada,H. Okuno,B. Homma,W. Jiang,S. Wang, Sep. 2014, Journal of Power and Energy Engineering, 2, 9

A Simple Equivalent Circuit for Efficiency Calculation of Brushless DC Motors, Ishikawa\, Takeo,Tsuji\, Takuma,Hashimoto\, Seiji,Kurita\, Nobuyuki, Mar. 2014, Journal of international Conference on Electrical Machines and Systems, 3, 1

Effective Energy Regeneration from Multi-Mode-Based Vehicle Vibration, S. Hashimoto,N. Nagai,S. Kumagai,M. Kasai, Apr. 2013, International Journal of Advanced Mechatronic Systems, 5, 4

Output Characteristics of Multi-Axis Vibration Power Generation Device for Automobiles, S. Kumagai,M. Kasai,S. Hashimoto,N. Nagai, Feb. 2013, International Journal of Advanced Mechatronic Systems, 5, 2

Reproduction of Vehicle Vibration by Acceleration-Based Multi-Axis Control, N. Nagai,S. Hashimoto,Y. Fujikura,J. Takahashi,S. Kumagai,M. Kasai,K. Suto,H. Okada, Dec. 2012, Journal of Applied Mechanics and Materials, 251

A Multi-Mode Vibration-Based Power Generator for Vehicles, S. Hashimoto,N. Nagai,Y. Fujikura,J. Takahashi,S. Kumagai,M. Kasai,K. Suto,H. Okada, Dec. 2012, Journal of Applied Mechanics and Materials, 251

Multi-axis Vibration Power Generation Device for Automobiles, S. Kumagai,M. Kasai,K. Suto,H. Okada,S. Hashimoto,N. Nagai,Y. Fujikura,J. Takahashi, Dec. 2012, Journal of Applied Mechanics and Materials, 251

A High Precision Control Based on Learning Algorithm with Reference Model and Disturbance Observer, S. Hashimoto,H. Saitou,K. Nakajima, Aug. 2012, Journal of Advanced Science Letters

Generation of Optimal Voltage Reference for Limit Cycle Oscillation in Digital Control-Based Switching Power Supply, S. Hashimoto,S. Naka,U. Sosorhang,N. Honjo, Jul. 2012, Journal of Energy and Power Engineering, JEPE11042201

Estimation of Physical Parameters using Learning Algorithm in Precision Positioning Control, S. Hashimoto,H. Watanabe,K. Nakajima, May 2011, Journal of Advanced Materials Research, 211-212

A High Precision Positioning Control Method Based on Learning Algorithm with Reference Model, K. Nakajima,H. Saitou,S. Hashimoto, May 2011, Journal of Advanced Materials Research, 211-212

Instrument for Measuring the Body Mass of Astronaut, Y. Fujii,K. Shimada,K. Maru,M. Yokota,S. Hashimoto,N. Nagai,Y. Sugita, Aug. 2009, Jpn. Soc. Aeronaut. Space Sci., 7

An Engine Control Systems Design for Low Emission Vehicles by Generalized Predictive Control based on Identified Model, S. Hashimoto,H. Okuda,Y. Okada,S. Adachi,S. Niwa,M. Kajitani, Mar. 2009, Journal of Electrical Engineering in Japan, 169, 3

圧粉磁心を用いたリニアアクチュエータの開発, 石川\,茂木,松波\,橋本,坂本,C. Simson, Oct. 2008, 16, 3

Material Tester Using a Controlled Oscillator and an Inertial Mass, S. Hashimoto,Y. Fujii, May 2008, Journal of Key Engineering Materials, 381-382

Mass measuring instrument for use under microgravity conditions, Yusaku Fujii,Kazuhito Shimada,Masayuki Yokota,Seiji Hashimoto,Yoishi Sugita,Hitomi Ito, May 2008, Journal of Review of Scientific Instruments, 79, 056105

一般化予測制御に基づくエンジン制御系の二段階設計法, 橋本\,奥田,岡田\,足立,丹羽\,梶谷, Mar. 2008, 128, 3

自動車パワートレイン制御におけるシステム同定への期待, 足立\,橋本, Mar. 2008, 47, 3

Accurate Friction Compensation for a High Precision Stage using a Synchronous Piezoelectric Device Driver, T. N. Minh,K. Ohishi,M. Takada,S. Hashimoto,K. Kosaka,H. Kubota,T.Ohmi, Jan. 2007, IEEJ Trans. IA, 127-D, 1

可変忘却要素を用いたオンライン同定法による自動車排出ガス用触媒のモデリングと劣化診断, 岡田\,奥田,足立\,丹羽,梶谷\,橋本, Dec. 2006, 126-D, 12

非共振型超音波アクチュエータ駆動精密ステージの位置決め制御における摩擦補償法, 橋本 誠司,大石 潔,小坂 光二,石川 赴夫,久保田 弘,大見 忠弘, Jun. 2006, Vol. 126-D, No. 6, pp. 719-725

Wear Reduction Method for Frictionally Fast Feeding Piezoactuator, K. Kosaka,K. Uozumi,A. Nakada,H. Kubota,T. Ohmi,T. Iwabuchi,T. Baba,T. Endo,H. Hashiguchi,H. Furukawa,Y. Egashira,HASHIMOTO SEIJI,M. Touge, Feb. 2006, Jpn. J. Appl. Phys., Vol. 45, No. 2A, pp. 1005-1011

Continuous Path Tracking System of High Precision Stage Using Synchronous Piezoelectric Device Driver, T. N. Minh,K. Ohishi,M. Takata,S. Hashimoto,K. Kosaka,H. Kubota,T. Ohmi, Feb. 2006, Journal of Advanced Materials Research, 11-12

スティックスリップ補償と連続軌跡追従制御に基づく超音波アクチュエータ駆動精密ステージの一制御法, 橋本 誠司,石川 赴夫,大石潔,小坂 光二,久保田 弘,大見 忠弘, Jun. 2005, Vol. 125-D, No.6, pp.582-589

Analysis of a PM Motor Drive System by a Coupled Method with MATLAB and FEM, ISHIKAWA TAKEO,T. Sunaga,S. Nakamura,D. Mori,HASHIMOTO SEIJI,M. Matsunami, May 2005, KIEE International Transactions on Electrical Machinery and Energy Conversion Systems, Vol. 5-B, No. 3, pp. 229-232

A Construction Method of High Response I-P Position Control System by Anti-Windup Compensation, HASHIMOTO SEIJI,ISHIKAWA TAKEO, Jan. 2005, IEEJ, Vol. 125-D, No. 1

ACサーボ系のMATLAB/Simulinkと有限要素法による連成解析, 石川 赴夫,D. Mori,橋本 誠司,松波道夫, Dec. 2004, 124(12):1283-1284

マルチデシメーション同定法を用いたロバスト制振制御のための柔軟構造物のモデリング手法, 橋本 誠司,石川 赴夫,足立 修一,船渡 寛人,神山 健三,磯島 彰宏, May 2004, Vol. 123-D, No.5

Optimal Design of Thrust Characteristics of Permanent Magnet Type Linear Motor Using Orthogonal Table and Multiregression Analysis, 石川 赴夫,C. Chen,橋本 誠司,松波 道夫, Feb. 2004, The Trans. of The IEEE Magnetics, Vol. 40, No. 2, pp. 1220-1223

Robust active vibration suppression control with constraint on the control signal: application to flexible structures, A. Forrai,橋本 誠司,船渡 寛人,神山 健三, Jan. 2003, An International Journal of Earthquake Engineering & Structural Dynamics，John Wiley & Sons, Ltd, Vol. 32, pp. 1655-1676

Robust-Controller design with hard constraint on the control signal - application for active vibration suppression of flexible structure, A. Forrai,橋本 誠司,船渡 寛人,神山 健三, Jun. 2002, Archive of Applied Mechanics, Springer, Volume 72, Issue 6-7 pp.379-39

Structural control technology - System identification and control of flexible structures, A. Forrai,橋本 誠司,船渡 寛人,神山 健三, Dec. 2001, Computing and Control Engineering Journal, Vol. 12, No. 6, pp.257-262

Autonomous Flight Control for a Large-Scale Unmanned Helicopter, 足立 修一,橋本 誠司,宮森 剛,Anzhong Tan, Dec. 2001, The Trans. of The IEE of Japan, Vol. 121-D, No. 12, pp. 1278-1

Robust Controller Design with Hard Constraints on the Control Signal - Application for Motion Control Systems, A. Forrai,田野井,橋本 誠司,船渡 寛人,神山 健三, Apr. 2001, Journal of Electrical Engineering, Archiv fuer Elektrotechnik, Springer, Volume 83, Issue 4 pp.179-186

AR Based Identification and Control Approach in Vibration Suppression, 橋本 誠司,原 賢志,船渡 寛人,神山 健三, Mar. 2001, The Trans. of the IEEE IAS, Vol. 37, No. 3, pp. 806-811

Gray Box Identification of Flexible Structures - Application to Robust Active Vibration Suppression Control, A. Forrai,橋本 誠司,磯島 彰宏,船渡 寛人,神山 健三, Jan. 2001, An International Journal of Earthquake Engineering & Structural Dynamics，John Wiley & Sons, Ltd, Vol. 30, pp. 1203-1220

オートチューニングを目的とした誘導電動機のシステム同定法, 橋本 誠司,船渡 寛人,今成 穣,神山 健三, Oct. 2000, Vol. 120-D,No. 10,pp. 1241-124

２可変パラメータによる多慣性負荷系の制振制御, 船渡 寛人,山本 麿人,原 賢志,橋本 誠司,神山 健三, Aug. 1999, Vol. 119-D, No. 8/9

DVFC-Based Identification and Its Application to Robust Vibration Suppression Control of Flexible Structures, 橋本 誠司,船渡 寛人,原 賢志,神山 健三, Jun. 1999, Vol. 119-D,No. 6,pp. 888-894

部分状態フィードバック補償による軸ねじり振動抑制制御, 原 賢志,船渡 寛人,橋本 誠司,神山 健三, Feb. 1999, Vol. 119-D,No. 2,pp. 182-188

２可変パラメータによる多慣性負荷系の制振制御, 船渡 寛人,山本 麿人,橋本 誠司,神山 健三, Nov. 1998, Vol. 118-D,No. 11, pp. 1334-13

２可変パラメータによる２慣性負荷系の振動抑制制御, 橋本 誠司,船渡 寛人,原 賢志,和泉 一輝,神山 健三, Oct. 1998, Vol. 118-D, No. 10,pp. 1172-11

不確かさを陽に考慮した一次元H∞コントローラによる速度制御系のロバスト制振制御, 橋本 誠司,船渡 寛人,山本 麿人,原 賢志,神山 健三, May 1998, Vol. 118-D,No. 5,pp. 645-651

２慣性共振系の速度制御用H∞コントローラの次数低減化, 橋本 誠司,神山 健三, Sep. 1997, Vol. 115-D,No. 8,pp. 1070-1071

部分状態フィードバック制御による共振負荷を持つサーボ系の設計法, 原 賢志,橋本 誠司,船渡 寛人,神山 健三, Sep. 1997, Vol. 117-D,No. 9,pp. 1172-1173

軽量一体型「自由外出マスク」～ロックダウン・外出自粛を不要化する「決め手」～, 藤井雄作, 5, 1, 1, 7

Mass measuring instrument for use under microgravity conditions, Fujii, Yusaku;Shimada, Kazuhito;Yokota, Masayuki;Hashimoto, Seiji;Sugita, Yoichi;Ito, Hitomi, 2008, REVIEW OF SCIENTIFIC INSTRUMENTS, 79, 5

Study of the effect of mechanical impact parameters on an impact-mode piezoelectric ceramic power generator, Basari, Arnat Arnir;Awaji, Sosuke;Sakamoto, Shintaro;Hashimoto, Seiji;Homma, Bunji;Suto, Kenji;Okada, Hiroaki;Okuno, Hideki;Kobayashi, Kojiro;Kumagai, Shunji, 2015, CERAMICS INTERNATIONAL, 41, 9, 12038, 12044

Analysis and Design of an Air-Coupled DC Transformer with a Hybrid Modulation Control Method, Xu, Song;Jiang, Wei;Hashimoto, Seiji, 2019, ENERGIES, 12, 13

Design and Implementation of a Low-Power Low-Cost Digital Current-Sink Electronic Load, Jiang, Wei;Wang, Jieyun;Wang, Qianlong;Xu, Song;Hashimoto, Seiji;Liu, Zhong, 2019, ENERGIES, 12, 13

Slow Mode-Based Control Method for Multi-Point Temperature Control System, Xu, Song;Hashimoto, Seiji;Jiang, Wei;Jiang, Yuqi;Izaki, Katsutoshi;Kihara, Takeshi;Ikeda, Ryota, 2019, PROCESSES, 7, 8

A Reference-Model-Based Artificial Neural Network Approach for a Temperature Control System, Xu, Song;Hashimoto, Seiji;Jiang, YuQi;Izaki, Katsutoshi;Kihara, Takeshi;Ikeda, Ryota;Jiang, Wei, 2020, PROCESSES, 8, 1

Multi-Decimation Identification-Based Modeling Method of Flexible Structures for Robust Vibration Control, HASHIMOTO Seiji;ISHIKAWA Takeo;ADACHI Shuichi;FUNATO Hirohito;KAMIYAMA Kenzo;ISOJIMA Akihiro, May 2004, IEEJ Transactions on Industry Applications, 124, 5, 471, 478

A Construction Method of High Response I-P Position Control System by Anti-Windup Compensation, KOSAKA Koji;HASHIMOTO Seiji;OHISHI Kiyoshi;ISHIKAWA Takeo;KUBOTA Hiroshi;OHMI Tadahiro, Jan. 2005, IEEJ Transactions on Industry Applications, 125, 1, 117, 118

Analysis of an AC Servo System by the Method Coupling MATLAB/Simulink with Finite Element Method, ISHIKAWA Takeo;MORI David;HASHIMOTO Seiji;MATSUNAMI Michio, Dec. 2004, IEEJ Transactions on Industry Applications, 124, 12, 1283, 1284

A Friction Model-Based Control of Precision Stages Driven by Non-Resonant Ultrasonic Motor, HASHIMOTO Seiji;OHISHI Kiyoshi;KOSAKA Koji;OHISHI Takuya;ISHIKAWA Takeo;KUBOTA Hiroshi;OHMI Tadahiro, Mar. 2004, 2004, 24, 1, 6

Design Method of Continuous Path Tracking System for Precision Stage using SPIDER, KAMIMURA Atsushi;TROUONG Ngoc Minh;OHISHI Kiyoshi;TAKATA Masasuke;HASHIMOTO Seiji;KOSAKA Kouji;KUBOTA Hiroshi;OHMI Tadahiro, Mar. 2005, 2005, 40, 73, 78

Experimental Friction Compensation Method for SPIDER-Driven Precision Stage Control, OHISHI Takuya;HASHIMOTO Seiji;ISHIKAWA Takeo;OHISHI Kiyoshi;KOSAKA Kouji;KUBOTA Hiroshi;OHMI Tadahiro, Mar. 2005, 2005, 40, 79, 84

A Control Method of Ultrasonic Actuator-Driven Precision Stages Based on Stick-Slip Compensation and Continuous-Path Tracking, HASHIMOTO Seiji;OHISHI Kiyoshi;KOSAKA Koji;ISHIKAWA Takeo;KUBOTA Hiroshi;OHMI Tadahiro, Jun. 2005, IEEJ Transactions on Industry Applications, 125, 6, 582, 589

Adaptive Observer Based-Static Friction Compensation of Ultraprecision Stages for Next-Generation Semiconductor Exposure Equipment, KUROKAWA Takayuki;HASHIMOTO Seiji;OHISHI Kiyoshi;KOSAKA Koji;ISHIKAWA Takeo;KUBOTA Hiroshi;OHMI Tadahiro, Oct. 2005, 2005, 116, 45, 50

Analysis of Radial Force and Vibration of an Induction Motor Fed by PWM Inverter, ISHIKAWA Takeo;ISOGAI Takuya;HASHIMOTO Seiji;MATSUNAMI Michio, Dec. 2005, 2005, 171, 49, 54

A Friction Compensation Method in Positioning Control of Nonresonant Ultrasonic Actuator-Driven Precise Stage, HASHIMOTO Seiji;OHISHI Kiyoshi;KOSAKA Koji;ISHIKAWA Takeo;KUBOTA Hiroshi;OHMI Tadahiro, Jun. 2006, IEEJ Transactions on Industry Applications, 126, 6, 719, 725

Modeling and Deterioration Diagnosis of Catalyst for Automobile Exhaust Gas by On-Line Identification Method With Variable Forgetting Factor, OKADA Yasushi;OKUDA Hiroyuki;ADACHI Shuichi;NIWA Shinji;KAJITANI Mitsunobu;HASHIMOTO Seiji, Dec. 2006, IEEJ Transactions on Industry Applications, 126, 12, 1637, 1644

Accurate Friction Compensation for a High Precision Stage using a Synchronous Piezoelectric Device Driver, MINH Truong Ngoc;OHISHI Kiyoshi;TAKATA Masasuke;HASHIMOTO Seiji;KOSAKA Kouji;KUBOTA Hiroshi;OHMI Tadahiro, Jan. 2007, IEEJ Transactions on Industry Applications, 127, 1, 44, 51

A Fast-Response and High-Precision Control Method Based on Internal Model Control, KIGURE Masayuki;HASHIMOTO Seiji;ISHIKAWA Takeo, Sep. 2006, 2006, 114, 31, 36

Adaptive Friction Compensation for a High Precision Stage using Synchronous Piezoelectric Device Driver, MINH Truong Ngoc;OHISHI Kiyoshi;TAKATA Masasuke;HASHIMOTO Seiji;KOSAKA Kouji;KUBOTA Hiroshi;OHMI Tadahiro, Mar. 2007, 2007, 85, 7, 12

Comparison of the Characteristics of Different Interior Permanent Magnet Synchronous Motors, ISHIKAWA Takeo;KIMURA Toshiyuki;HASHIMOTO Seiji;MATSUNAMI Michio, Jul. 2003, 2003, 34, 7, 12

Expectation for System Identification in Automobile Power Train Control, ADACHI Shuichi;HASHIMOTO Seiji, Mar. 2008, 47, 3, 202, 205

Two-Step Design Method of Engine Control System Based on Generalized Predictive Control, HASHIMOTO Seiji;OKUDA Hiroyuki;OKADA Yasushi;ADACHI Shuichi;NIWA Shinji;KAJITANI Mitsunobu, Mar. 2008, IEEJ Transactions on Industry Applications, 128, 3, 251, 258

Experimental Investigation of Vibration and Noise in a PWM Inverter-Fed Induction Motor, MORI David;AZAMI Nobuaki;ISHIKAWA Takeo;HASHIMOTO Seiji;MATUNAMI Michio, Oct. 2002, 2002, 108, 71, 76

Development of an Electric Vehicle Using Inverter-fed Induction Motor Controlled by FPGA, ISOGAI Takuya;TERASHITA Shigeaki;CHIBA Yasunori;NARAHARA Hiroaki;MATSUNAMI Michio;HASHIMOTO Seiji;ISHIKAWA Takeo, May 2004, 2004, 35, 17, 21

Optimal Voltage Reference Generation for Digital Control-Based Switching Power Supply, NAKA Shojiro;SATO Tomonori;SOSORHANG Ung;HASHIMOTO Seiji, Sep. 2010, 2010, 172, 13, 18

Effect of Signal Control and Idling Stop to Reduce Exhaust Gas NOx, ISHIKAWA Takeo;SHIIYA Takashi;HASHIMOTO Seiji;MATSUNAMI Michio, Jun. 2004, 23, 21, 24

615 Fast Motion Control of a High Precision Stage using a Synchronous Piezoelectric Device Driver, MINH Truong Ngoc;KAMIMURA Atsushi;OHISHI Kiyoshi;TAKATA Masasuke;HASHIMOTO Seiji;KOSAKA Koji;KUBOTA Hiroshi, 2005, The Proceedings of the Dynamics & Design Conference, 2005, 0, _615, 1_-_615-6_

Development of a Linear Actuator with Magnetic Powder Core, ISHIKAWA Takeo;MOGI Takafumi;MATSUNAMI Michio;HASHIMOTO Seiji;SAKAMOTO Masafumi;SIMSON Charles, Sep. 2008, Journal of the Japan Society of Applied Electromagnetics and Mechanics, 16, 3, 190, 195

2111 Vibration Suppression of Mechanical Resonant Mode Based on Discrete-Valued Input Control, Shimosakai Keisuke;Hashimoto Seiji;Nitta Mayumi;Nakajima Jun;Kosaka Kouji, 2008, 2008, 183, 184

Instrument for Measuring the Body Mass of Astronaut, FUJII Yusaku;SHIMADA Kazuhito;MARU Koichi;YOKOTA Masayuki;HASHIMOTO Seiji;NAGAI Norihiro;SUGITA Yoichi, 2009, TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES, SPACE TECHNOLOGY JAPAN, 7, 26, Th_1, Th_6

The Position Control Method of Precision Stage using SPIDER, Kamimura Atsushi;Hayano Toru;Ohishi Kiyoshi;Hashimoto Seiji;Kosaka Koji;Kubota Hiroshi;Ohmi Tadahiro, 2004, Proceedings of the Japan Joint Automatic Control Conference, 47, 0, 276, 276

Experimental Analyses on L-Shape PZT Vibration Power Generator Operates in Bending-Shear Mode, Basari Amat Amir;Kumagai Shunji;Awaji Sosuke;Sakamoto Shintaro;Hashimoto Seiji;Homma Bunji;Suto Kenji;Okada Hiroaki;Okuno Hideki;Kobayashi Kojiro, 2014, Proceedings of the Japan Joint Automatic Control Conference, 57, 0, 9, 13

Precise Vehicle Road Vibration Reproduction using Servo Drive Systems, Takahashi Yoshimune;Basari Amat Amir;Hashimoto Seiji;Sudo Kenji;Honma Bunji;Okada Hiroaki;Okuda Hideki;Kobayashi Kojiro;Kumagai Shunji, 2014, Proceedings of the Japan Joint Automatic Control Conference, 57, 0, 330, 332

非共振型アクチュエータ(SPIDER)を用いた精密ステージの高速位置決め制御法, 上村 篤嗣;大石 潔;橋本 誠司;小坂 光二;久保田 弘;大見 忠弘, 2004, Tohoku-Section Joint Convention Record of Institutes of Electrical and Information Engineers, Japan, 2004, 0, 304, 304

A State Estimation Method of Vehicles in EPS System Using Sliding Mode Observer, Fujimura Yu;Hashimoto Seiji;Xu Song, 2017, Proceedings of the Japan Joint Automatic Control Conference, 60, 0, 1620, 1627

Improvement in Response of EPS Control Based on one-input two-outputs SMC, Abe Tomokazu;Hashimoto Seiji;Kajitani Mitsunobu, 2018, IEEJ Transactions on Industry Applications, 138, 4, 346, 351

On-Line Identification Method of Static Friction for Ultra-Precision Positioning, Hashimoto Seiji;Ohishi Kiyoshi;Ishikawa Takeo;Kosaka Koji;Kubota Hiroshi;Ohmi Tadahiro, 2004, SICE Annual Conference Program and Abstracts, 2004, 0, 98, 98

群馬支所における最近の活動, 橋本 誠司, 2019, The Journal of The Institute of Electrical Engineers of Japan, 139, 7, 442, 442

Identification of continuous-time state-space model using backpropagation for matrix exponential, Kawaguchi Takahiro;Hashimoto Seiji, 2020, Proceedings of the Japan Joint Automatic Control Conference, 63, 0, 123, 127

Model Predictive Direct Torque Control of IPMSM for EV in Switch Open-circuit Fault-tolerant Mode, Yang Ting;Hashimoto Seiji;Kawaguchi Takahiro, 2020, Proceedings of the Japan Joint Automatic Control Conference, 63, 0, 1150, 1153

High-efficient Control of an IPM Motor Based on Learning Algorithm, Honda Ryousuke;Kawaguchi Takahiro;Hashimoto Seiji;Kigure Masayuki;Shibuya Makoto, 2020, Proceedings of the Japan Joint Automatic Control Conference, 63, 0, 1146, 1149

Mass measuring instrument for use under microgravity conditions., Fujii Yusaku;Shimada Kazuhito;Yokota Masayuki;Hashimoto Seiji;Sugita Yoichi;Ito Hitomi, The Review of scientific instruments, 79, 5

An Engine Control Systems Design for Low-Emission Vehicles by Generalized Predictive Control Based on Identified Model, Hashimoto, Seiji;Okuda, Hiroyuki;Okada, Yasushi;Adachi, Shuichi;Niwa, Shinji;Kajitani, Mitsunobu, 2009, ELECTRICAL ENGINEERING IN JAPAN, 169, 3, 47, 55

Pole-Zero Cancellation Method for Multi Input Multi Output (MIMO) Temperature Control in Heating Process System, Xu, Song;Hashimoto, Seiji;Jiang, Wei, 2019, PROCESSES, 7, 8

Switching Sequence Model Predictive Direct Torque Control of IPMSMs for EVs in Switch Open-Circuit Fault-Tolerant Mode, Yang, Ting;Kawaguchi, Takahiro;Hashimoto, Seiji;Jiang, Wei, 2020, ENERGIES, 13, 21

A Reference-Model-Based Neural Network Control Method for Multi-Input Multi-Output Temperature Control System, Liu, Yuan;Xu, Song;Hashimoto, Seiji;Kawaguchi, Takahiro, 2020, PROCESSES, 8, 11

A Hardware-in-the-Loop-on-Chip Development System for Teaching and Development of Dynamic Systems, Jiang, Wei;Sun, Linfeng;Chen, Yan;Ma, Haining;Hashimoto, Seiji, 2021, ELECTRONICS, 10, 7

Recurrent Neural Network-Based Temperature Control System Weight Pruning Based on Nonlinear Reconstruction Error, Liu, Yuan;Kawaguchi, Takahiro;Xu, Song;Hashimoto, Seiji, 2022, PROCESSES, 10, 1

A Real-Time Application for the Analysis of Multi-Purpose Vending Machines with Machine Learning, Cao, Yu;Ikenoya, Yudai;Kawaguchi, Takahiro;Hashimoto, Seiji;Morino, Takayuki, 2023, SENSORS, 23, 4

Design and Implementation of a Low-Voltage Photovoltaic System Integrated with Battery Energy Storage, He, Xiao;Hashimoto, Seiji;Jiang, Wei;Liu, Jicheng;Kawaguchi, Takahiro, 2023, ENERGIES, 16, 7

Path following for Autonomous Ground Vehicle Using DDPG Algorithm: A Reinforcement Learning Approach, Cao, Yu;Ni, Kan;Jiang, Xiongwen;Kuroiwa, Taiga;Zhang, Haohao;Kawaguchi, Takahiro;Hashimoto, Seiji;Jiang, Wei, 2023, APPLIED SCIENCES-BASEL, 13, 11

Cooperative Control of Recurrent Neural Network for PID-Based Single Phase Hotplate Temperature Control Systems, Xu, Song;Shi, Siyuan;Jiang, Wei;Hashimoto, Seiji, 2023, IEEE ACCESS, 11, 105557, 105569

群馬支所における最近の活動状況, 橋本 誠司, Mar. 2021, The Journal of The Institute of Electrical Engineers of Japan, 141, 3, 172, 172

Retrofit Controller Design using Finite Impulse Response Representation and Reinforcement Learning, Negishi Kohei;Kawaguchi Takahiro;Hashimoto Seiji, 2021, Proceedings of the Japan Joint Automatic Control Conference, 64, 0, 971, 974

A Deep Learning-based Model Applicable to Analysis of Vending Machines, Cao Yu;Ikenoya Yudai;Kawaguchi Takahiro;Hashimoto Seiji;Morino Takayuki, 2021, Proceedings of the Japan Joint Automatic Control Conference, 64, 0, 968, 970

A Real-Time Application for the Analysis of Multi-Purpose Vending Machines with Machine Learning., Cao Yu;Ikenoya Yudai;Kawaguchi Takahiro;Hashimoto Seiji;Morino Takayuki, Feb. 2023, Sensors (Basel, Switzerland), 23, 4

Path Following for Autonomous Mobile Robots with Deep Reinforcement Learning., Cao Yu;Ni Kan;Kawaguchi Takahiro;Hashimoto Seiji, Jan. 2024, Sensors (Basel, Switzerland), 24, 2

1入力2出力SMC適用によるEPS制御の高性能化, 阿部 己和,橋本 誠司,梶谷 満信, 2018, 138, 4, 346, 351

DC Micro-Grid Contactless Power Supply System with Active Load Detecting Control Method, Song Xu,Seiji Hashimoto,Wei Jiang, 2018, 2, 2, 36, 44

DC Micro-Grid Contactless Power Supply System with Active Load Detecting Control Method, Song Xu,Seiji Hashimoto,Wei Jiang, 2018, Journal of Technology and Social Science, 2, 2, 36, 44

Electric Power Steering System Design Based on Linear Quadratic Control, T. Abe,Y. Fujimura,T. Hirose,S. Hashimoto,M. Kajitani,K. Sato,K. Gonpei, 2017, 1, 2, 37, 46

An Observer Design Strategy in Electric Power Steering System, Jingying Lu,Wei Jiang,Tomokazu Abe,Yu Fujimura,Seiji Hashimoto,Mitsunobu Kajitani, 2017, 1, 2, 47, 53

High Power Output of L-shape PZT Power Generator Working in Bending-Shear Mode, A. A. Basari,S. Hashimoto, 2017, 9, 1, 41, 45

Electric Power Steering System Design Based on Linear Quadratic Control, T. Abe,Y. Fujimura,T. Hirose,S. Hashimoto,M. Kajitani,K. Sato,K. Gonpei, 2017, Journal of Technology and Social Science, 1, 2, 37, 46

An Observer Design Strategy in Electric Power Steering System, Jingying Lu,Wei Jiang,Tomokazu Abe,Yu Fujimura,Seiji Hashimoto,Mitsunobu Kajitani, 2017, Journal of Technology and Social Science, 1, 2, 47, 53

High Power Output of L-shape PZT Power Generator Working in Bending-Shear Mode, A. A. Basari,S. Hashimoto, 2017, Journal of Telecommunication, Electronic and Computer Engineering, 9, 1, 41, 45

Design and optimization of a wideband impact mode piezoelectric power generator, A. A. Basari,S. Hashimoto,B. Homma,H. Okada,H. Okuno,S. Kumagai, May 2016, CERAMICS INTERNATIONAL, 42, 6, 6962, 6968

Design and optimization of a wideband impact mode piezoelectric power generator, A. A. Basari,S. Hashimoto,B. Homma,H. Okada,H. Okuno,S. Kumagai, May 2016, CERAMICS INTERNATIONAL, 42, 6, 6962, 6968

Study of the effect of mechanical impact parameters on an impact-mode piezoelectric ceramic power generator, Arnat Arnir Basari,Sosuke Awaji,Shintaro Sakamoto,Seiji Hashimoto,Bunji Homma,Kenji Suto,Hiroaki Okada,Hideki Okuno,Kojiro Kobayashi,Shunji Kumagai, Nov. 2015, CERAMICS INTERNATIONAL, 41, 9, 12038, 12044

Study of the effect of mechanical impact parameters on an impact-mode piezoelectric ceramic power generator, Arnat Arnir Basari,Sosuke Awaji,Shintaro Sakamoto,Seiji Hashimoto,Bunji Homma,Kenji Suto,Hiroaki Okada,Hideki Okuno,Kojiro Kobayashi,Shunji Kumagai, Nov. 2015, CERAMICS INTERNATIONAL, 41, 9, 12038, 12044

The Effect of the Parameters of a Vibration-Based Impact Mode Piezoelectric Power Generator, Amat A. Basari,S. Awaji,S. Sakamoto,S. Hashimoto,B. Homma,K. Suto,H. Okada,H. Okuno,K. Kobayashi,S. Kumagai, 2015, SHOCK AND VIBRATION, 345191

The Effect of the Parameters of a Vibration-Based Impact Mode Piezoelectric Power Generator, Amat A. Basari,S. Awaji,S. Sakamoto,S. Hashimoto,B. Homma,K. Suto,H. Okada,H. Okuno,K. Kobayashi,S. Kumagai, 2015, SHOCK AND VIBRATION, 345191

Shape Effect of Piezoelectric Energy Harvester on Vibration Power Generation, A. A. Basari,S. Awaji,S. Wang,S. Hashimoto,S. Kumagai,K. Suto,H. Okada,H. Okuno,B. Homma,W. Jiang,S. Wang, 2014, 2, 9, 117, 124

A Simple Equivalent Circuit for Efficiency Calculation of Brushless DC Motors, Ishikawa\, Takeo,Tsuji\, Takuma,Hashimoto\, Seiji,Kurita\, Nobuyuki, 2014, 3, 1, 54, 60

Shape Effect of Piezoelectric Energy Harvester on Vibration Power Generation, A. A. Basari,S. Awaji,S. Wang,S. Hashimoto,S. Kumagai,K. Suto,H. Okada,H. Okuno,B. Homma,W. Jiang,S. Wang, 2014, Journal of Power and Energy Engineering, 2, 9, 117, 124

A Simple Equivalent Circuit for Efficiency Calculation of Brushless DC Motors, Ishikawa\, Takeo,Tsuji\, Takuma,Hashimoto\, Seiji,Kurita\, Nobuyuki, 2014, Journal of international Conference on Electrical Machines and Systems, 3, 1, 54, 60

A Multi-Mode Vibration-Based Power Generator for Vehicles, Seiji Hashimoto,Nobuyuki Nagai,Yoshimitsu Fujikura,Jyunpei Takahashi,Shunji Kumagai,Makoto Kasai,Kenji Suto,Hiroaki Okada, 2013, NEW TRENDS IN MECHANICAL ENGINEERING AND MATERIALS, 251, 124, +

A Multi-Mode Vibration-Based Power Generator for Vehicles, Seiji Hashimoto,Nobuyuki Nagai,Yoshimitsu Fujikura,Jyunpei Takahashi,Shunji Kumagai,Makoto Kasai,Kenji Suto,Hiroaki Okada, 2013, NEW TRENDS IN MECHANICAL ENGINEERING AND MATERIALS, 251, 124, +

Multi-Axis Vibration Power Generation Device for Automobiles, Shunji Kumagai,Kenji Suto,Hiroaki Okada,Makoto Kasai,Seiji Hashimoto,Nobuyuki Nagai,Yoshimitsu Fujikura,Junpei Takahashi, 2013, NEW TRENDS IN MECHANICAL ENGINEERING AND MATERIALS, 251, 119, +

Multi-Axis Vibration Power Generation Device for Automobiles, Shunji Kumagai,Kenji Suto,Hiroaki Okada,Makoto Kasai,Seiji Hashimoto,Nobuyuki Nagai,Yoshimitsu Fujikura,Junpei Takahashi, 2013, NEW TRENDS IN MECHANICAL ENGINEERING AND MATERIALS, 251, 119, +

Effective Energy Regeneration from Multi-Mode-Based Vehicle Vibration, S. Hashimoto,N. Nagai,S. Kumagai,M. Kasai, 2013, 5, 4, 279, 287

Output Characteristics of Multi-Axis Vibration Power Generation Device for Automobiles, S. Kumagai,M. Kasai,S. Hashimoto,N. Nagai, 2013, 5, 2, 105, 112

Effective Energy Regeneration from Multi-Mode-Based Vehicle Vibration, S. Hashimoto,N. Nagai,S. Kumagai,M. Kasai, 2013, International Journal of Advanced Mechatronic Systems, 5, 4, 279, 287

Output Characteristics of Multi-Axis Vibration Power Generation Device for Automobiles, S. Kumagai,M. Kasai,S. Hashimoto,N. Nagai, 2013, International Journal of Advanced Mechatronic Systems, 5, 2, 105, 112

A High Precision Control Based on Learning Algorithm with Reference Model and Disturbance Observer, S. Hashimoto,H. Saitou,K. Nakajima, 2012

Generation of Optimal Voltage Reference for Limit Cycle Oscillation in Digital Control-Based Switching Power Supply, S. Hashimoto,S. Naka,U. Sosorhang,N. Honjo, 2012, JEPE11042201

Reproduction of Vehicle Vibration by Acceleration-Based Multi-Axis Control, N. Nagai,S. Hashimoto,Y. Fujikura,J. Takahashi,S. Kumagai,M. Kasai,K. Suto,H. Okada, 2012, 251

A High Precision Control Based on Learning Algorithm with Reference Model and Disturbance Observer, S. Hashimoto,H. Saitou,K. Nakajima, 2012, Journal of Advanced Science Letters

Generation of Optimal Voltage Reference for Limit Cycle Oscillation in Digital Control-Based Switching Power Supply, S. Hashimoto,S. Naka,U. Sosorhang,N. Honjo, 2012, Journal of Energy and Power Engineering, JEPE11042201

Reproduction of Vehicle Vibration by Acceleration-Based Multi-Axis Control, N. Nagai,S. Hashimoto,Y. Fujikura,J. Takahashi,S. Kumagai,M. Kasai,K. Suto,H. Okada, 2012, Journal of Applied Mechanics and Materials, 251

A High Precision Positioning Control Method Based on Learning Algorithm with Reference Model, Kenji Nakajima,Hiroyuki Saitou,Seiji Hashimoto, 2011, MECHATRONICS AND INTELLIGENT MATERIALS, PTS 1 AND 2, 211-212, 671, 675

A High Precision Positioning Control Method Based on Learning Algorithm with Reference Model, Kenji Nakajima,Hiroyuki Saitou,Seiji Hashimoto, 2011, MECHATRONICS AND INTELLIGENT MATERIALS, PTS 1 AND 2, 211-212, 671, 675

Estimation of Physical Parameters using Learning Algorithm in Precision Positioning Control, S. Hashimoto,H. Watanabe,K. Nakajima, 2011, 211-212, 671, 675

Estimation of Physical Parameters using Learning Algorithm in Precision Positioning Control, S. Hashimoto,H. Watanabe,K. Nakajima, 2011, Journal of Advanced Materials Research, 211-212, 671, 675

An Engine Control Systems Design for Low-Emission Vehicles by Generalized Predictive Control Based on Identified Model, Seiji Hashimoto,Hiroyuki Okuda,Yasushi Okada,Shuichi Adachi,Shinji Niwa,Mitsunobu Kajitani, Nov. 2009, ELECTRICAL ENGINEERING IN JAPAN, 169, 3, 47, 55

An Engine Control Systems Design for Low-Emission Vehicles by Generalized Predictive Control Based on Identified Model, Seiji Hashimoto,Hiroyuki Okuda,Yasushi Okada,Shuichi Adachi,Shinji Niwa,Mitsunobu Kajitani, Nov. 2009, ELECTRICAL ENGINEERING IN JAPAN, 169, 3, 47, 55

Instrument for Measuring the Body Mass of Astronaut, Y. Fujii,K. Shimada,K. Maru,M. Yokota,S. Hashimoto,N. Nagai,Y. Sugita, 2009, 7, Th1-Th6

Instrument for Measuring the Body Mass of Astronaut, Y. Fujii,K. Shimada,K. Maru,M. Yokota,S. Hashimoto,N. Nagai,Y. Sugita, 2009, Jpn. Soc. Aeronaut. Space Sci., 7, Th1-Th6

Mass measuring instrument for use under microgravity conditions, Yusaku Fujii,Kazuhito Shimada,Masayuki Yokota,Seiji Hashimoto,Yoichi Sugita,Hitomi Ito, May 2008, REVIEW OF SCIENTIFIC INSTRUMENTS, 79, 5

Mass measuring instrument for use under microgravity conditions, Yusaku Fujii,Kazuhito Shimada,Masayuki Yokota,Seiji Hashimoto,Yoichi Sugita,Hitomi Ito, May 2008, REVIEW OF SCIENTIFIC INSTRUMENTS, 79, 5

一般化予測制御に基づくエンジン制御系の二段階設計法, 橋本\,奥田,岡田\,足立,丹羽\,梶谷, 2008, 128, 3

自動車パワートレイン制御におけるシステム同定への期待, 足立\,橋本, 2008, 47, 3

Material Tester Using a Controlled Oscillator and an Inertial Mass, S. Hashimoto,Y. Fujii, 2008, 381-382, 457, 460

圧粉磁心を用いたリニアアクチュエータの開発, 石川\,茂木,松波\,橋本,坂本,C. Simson, 2008, 16, 3, 190, 195

Material Tester Using a Controlled Oscillator and an Inertial Mass, S. Hashimoto,Y. Fujii, 2008, Journal of Key Engineering Materials, 381-382, 457, 460

Accurate Friction Compensation for a High Precision Stage using a Synchronous Piezoelectric Device Driver, T. N. Minh,K. Ohishi,M. Takada,S. Hashimoto,K. Kosaka,H. Kubota,T.Ohmi, 2007, 127-D, 1, 44, 51

Accurate Friction Compensation for a High Precision Stage using a Synchronous Piezoelectric Device Driver, T. N. Minh,K. Ohishi,M. Takada,S. Hashimoto,K. Kosaka,H. Kubota,T.Ohmi, 2007, IEEJ Trans. IA, 127-D, 1, 44, 51

Wear reduction method for frictionally fast feeding piezoactuator, K Kosaka,T Iwabuchi,T Baba,T Endo,H Hashiguchi,H Furukawa,Y Egashira,S Hashimoto,M Touge,K Uozumi,A Nakada,H Kubota,T Ohmi, Feb. 2006, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 45, 2A, 1005, 1011

Wear reduction method for frictionally fast feeding piezoactuator, K Kosaka,T Iwabuchi,T Baba,T Endo,H Hashiguchi,H Furukawa,Y Egashira,S Hashimoto,M Touge,K Uozumi,A Nakada,H Kubota,T Ohmi, Feb. 2006, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 45, 2A, 1005, 1011

非共振型超音波アクチュエータ駆動精密ステージの位置決め制御における摩擦補償法, 橋本 誠司,大石 潔,小坂 光二,石川 赴夫,久保田 弘,大見 忠弘, 2006, Vol. 126-D, No. 6, pp. 719-725

Continuous Path Tracking System of High Precision Stage Using Synchronous Piezoelectric Device Driver, T. N. Minh,K. Ohishi,M. Takata,S. Hashimoto,K. Kosaka,H. Kubota,T. Ohmi, 2006, 11-12, 121, 124

可変忘却要素を用いたオンライン同定法による自動車排出ガス用触媒のモデリングと劣化診断, 岡田\,奥田,足立\,丹羽,梶谷\,橋本, 2006, 126-D, 12, 1637, 1644

Continuous Path Tracking System of High Precision Stage Using Synchronous Piezoelectric Device Driver, T. N. Minh,K. Ohishi,M. Takata,S. Hashimoto,K. Kosaka,H. Kubota,T. Ohmi, 2006, Journal of Advanced Materials Research, 11-12, 121, 124

Analysis of a PM Motor Drive System by a Coupled Method with MATLAB and FEM, ISHIKAWA TAKEO,T. Sunaga,S. Nakamura,D. Mori,HASHIMOTO SEIJI,M. Matsunami, 2005, Vol. 5-B, No. 3, pp. 229-232

スティックスリップ補償と連続軌跡追従制御に基づく超音波アクチュエータ駆動精密ステージの一制御法, 橋本 誠司,石川 赴夫,大石潔,小坂 光二,久保田 弘,大見 忠弘, 2005, Vol. 125-D, No.6, pp.582-589

Analysis of a PM Motor Drive System by a Coupled Method with MATLAB and FEM, ISHIKAWA TAKEO,T. Sunaga,S. Nakamura,D. Mori,HASHIMOTO SEIJI,M. Matsunami, 2005, KIEE International Transactions on Electrical Machinery and Energy Conversion Systems, Vol. 5-B, No. 3, pp. 229-232

Optimal design of thrust characteristics of permanent magnet type linear motor using orthogonal table and multiregression analysis, T Ishikawa,C Chen,S Hashimoto,M Matsunami, Mar. 2004, IEEE TRANSACTIONS ON MAGNETICS, 40, 2, 1220, 1223

Optimal design of thrust characteristics of permanent magnet type linear motor using orthogonal table and multiregression analysis, T Ishikawa,C Chen,S Hashimoto,M Matsunami, Mar. 2004, IEEE TRANSACTIONS ON MAGNETICS, 40, 2, 1220, 1223

マルチデシメーション同定法を用いたロバスト制振制御のための柔軟構造物のモデリング手法, 橋本 誠司,石川 赴夫,足立 修一,船渡 寛人,神山 健三,磯島 彰宏, 2004, Vol. 123-D, No.5

ACサーボ系のMATLAB/Simulinkと有限要素法による連成解析, 石川 赴夫,D. Mori,橋本 誠司,松波道夫, 2004, 124(12):1283-1284

Robust active vibration suppression control with constraint on the control signal: application to flexible structures, A Forrai,S Hashimoto,H Funato,K Kamiyama, Sep. 2003, EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS, 32, 11, 1655, 1676

Robust active vibration suppression control with constraint on the control signal: application to flexible structures, A Forrai,S Hashimoto,H Funato,K Kamiyama, Sep. 2003, EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS, 32, 11, 1655, 1676

Robust-Controller design with hard constraint on the control signal - application for active vibration suppression of flexible structure, A Forrai,S Hashimoto,H Funato,K Kamiyama, Oct. 2002, ARCHIVE OF APPLIED MECHANICS, 72, 6-7, 379, 394

Robust-Controller design with hard constraint on the control signal - application for active vibration suppression of flexible structure, A Forrai,S Hashimoto,H Funato,K Kamiyama, Oct. 2002, ARCHIVE OF APPLIED MECHANICS, 72, 6-7, 379, 394

Gray Box Identification of Flexible Structures - Application to Robust Active Vibration Suppression Control, A. Forrai,橋本 誠司,磯島 彰宏,船渡 寛人,神山 健三, 2001, Vol. 30, pp. 1203-1220

AR Based Identification and Control Approach in Vibration Suppression, 橋本 誠司,原 賢志,船渡 寛人,神山 健三, 2001, Vol. 37, No. 3, pp. 806-811

Structural control technology - System identification and control of flexible structures, A. Forrai,橋本 誠司,船渡 寛人,神山 健三, 2001, Vol. 12, No. 6, pp.257-262

Autonomous Flight Control for a Large-Scale Unmanned Helicopter, 足立 修一,橋本 誠司,宮森 剛,Anzhong Tan, 2001, Vol. 121-D, No. 12, pp. 1278-1

Robust Controller Design with Hard Constraints on the Control Signal - Application for Motion Control Systems, A. Forrai,田野井,橋本 誠司,船渡 寛人,神山 健三, 2001, Volume 83, Issue 4 pp.179-186

Gray Box Identification of Flexible Structures - Application to Robust Active Vibration Suppression Control, A. Forrai,橋本 誠司,磯島 彰宏,船渡 寛人,神山 健三, 2001, An International Journal of Earthquake Engineering & Structural Dynamics，John Wiley & Sons, Ltd, Vol. 30, pp. 1203-1220

AR Based Identification and Control Approach in Vibration Suppression, 橋本 誠司,原 賢志,船渡 寛人,神山 健三, 2001, The Trans. of the IEEE IAS, Vol. 37, No. 3, pp. 806-811

Structural control technology - System identification and control of flexible structures, A. Forrai,橋本 誠司,船渡 寛人,神山 健三, 2001, Computing and Control Engineering Journal, Vol. 12, No. 6, pp.257-262

Autonomous Flight Control for a Large-Scale Unmanned Helicopter, 足立 修一,橋本 誠司,宮森 剛,Anzhong Tan, 2001, The Trans. of The IEE of Japan, Vol. 121-D, No. 12, pp. 1278-1

Robust Controller Design with Hard Constraints on the Control Signal - Application for Motion Control Systems, A. Forrai,田野井,橋本 誠司,船渡 寛人,神山 健三, 2001, Journal of Electrical Engineering, Archiv fuer Elektrotechnik, Springer, Volume 83, Issue 4 pp.179-186

オートチューニングを目的とした誘導電動機のシステム同定法, 橋本 誠司,船渡 寛人,今成 穣,神山 健三, 2000, Vol. 120-D,No. 10,pp. 1241-124

部分状態フィードバック補償による軸ねじり振動抑制制御, 原 賢志,船渡 寛人,橋本 誠司,神山 健三, 1999, Vol. 119-D,No. 2,pp. 182-188

２可変パラメータによる多慣性負荷系の制振制御, 船渡 寛人,山本 麿人,原 賢志,橋本 誠司,神山 健三, 1999, Vol. 119-D, No. 8/9

DVFC-Based Identification and Its Application to Robust Vibration Suppression Control of Flexible Structures, 橋本 誠司,船渡 寛人,原 賢志,神山 健三, 1999, Vol. 119-D,No. 6,pp. 888-894

２可変パラメータによる２慣性負荷系の振動抑制制御, 橋本 誠司,船渡 寛人,原 賢志,和泉 一輝,神山 健三, 1998, Vol. 118-D, No. 10,pp. 1172-11

２可変パラメータによる多慣性負荷系の制振制御, 船渡 寛人,山本 麿人,橋本 誠司,神山 健三, 1998, Vol. 118-D,No. 11, pp. 1334-13

不確かさを陽に考慮した一次元H∞コントローラによる速度制御系のロバスト制振制御, 橋本 誠司,船渡 寛人,山本 麿人,原 賢志,神山 健三, 1998, Vol. 118-D,No. 5,pp. 645-651

２慣性共振系の速度制御用H∞コントローラの次数低減化, 橋本 誠司,神山 健三, 1997, Vol. 115-D,No. 8,pp. 1070-1071

部分状態フィードバック制御による共振負荷を持つサーボ系の設計法, 原 賢志,橋本 誠司,船渡 寛人,神山 健三, 1997, Vol. 117-D,No. 9,pp. 1172-1173

現場で役立つ制御工学の基本（演習編）, 2017

現場で役立つ制御工学の基本（中国語翻訳本）, 2016

現場で役立つ制御工学の基本, 2012

電気電子回路, 2010

Retrofit Controller Design Using a Finite Impulse Response Representation and Reinforcement Learning, Negishi Kohei, Kawaguchi Takahiro, Hashimoto Seiji, SICE2022, Sep. 2022, English, International conference

A Method of Reducing Impulse Voltage in Grid Connection, Zhenlin Wang, Qiaoliang Huang, Song Xu, Lijuan Wang, Wei jiang, Seiji Hashimoto, ICAEE2021, Dec. 2021, English, International conference

Hardware in the loop Development System for Process Controls, Jie Bian, Xiang Peng, Wei Jiang, Song Xu, Seiji Hashimoto, Shuren Wang, ICAEE2021, Dec. 2021, English, International conference

Application of Convolutional Neural Network for Recognition of Face Covered with Facemask, Amat Amir Basari Seiji Hashimoto, Song Xu, Muhammad Aiman Rohaizi, ICAEE2021, Dec. 2021, English, International conference

Implementation of SLAM in RPLidar Application based on ICP Algorithm and KF Algorithm, Kan Ni, Seiji Hashimoto, Yu Cao, Takahiro Kawaguchi, ICAEE2021, Dec. 2021, English, International conference

Optimal Predictive Direct Power Control for Active NPC Three-level Rectifier, Ting Yang, Seiji Hashimoto, Wei Jiang and Takahiro Kawaguchi, International Conference on Technology and Social Science 2021 (ICTSS 2021), Dec. 2021, English, Japan, International conference

Machine Leaning-Based Diagnosis for Multi-Purpose Vending Machines, Yudai Ikenoya, Yu Cao, Takahiro Kawaguchi, Seiji Hashimoto and Takayuki Morino, International Conference on Technology and Social Science 2021 (ICTSS 2021), Dec. 2021, English, Japan, International conference

A Series Resonant Induction Heating System with Voltage Modulation Topology, Zheng Wang, Xun Chen, Lijuan Wang, Song Xu, Wei Jiang and Seiji Hashimoto, International Conference on Technology and Social Science 2021 (ICTSS 2021), Dec. 2021, English, Japan, International conference

A Half Bridge Complementary Double Coil Induction Heating System with Phase Shift Control Method, Liming Zhao, Xun Chen, Lijuan Wang, Song Xu, Wei Jiang and Seiji Hashimoto, International Conference on Technology and Social Science 2021 (ICTSS 2021), Dec. 2021, English, International conference

A switching sequence model predictive direct torque control of IPM motors, Ting Yang, Seiji Hashimoto, Takahiro Kawaguchi and Wei Jiang, ICTSS2020, Dec. 2020, International conference

A Novel Impulse Voltage Reduction Method for Reliable Grid Connection, Zhenlin Wang, Qiaoliang Huang, Song Xu, Lijuan Wang, Wei Jiang and Seiji Hashimoto, IEEE PEAS2021, Nov. 2021, International conference

Distributed Realtime Simulator for DC Microgrids, Renjie Qi, Wei Jiang, Song Xu and Seiji Hashimoto, IEEE PEAS2021, Nov. 2021, International conference

Control Design of a Lightweight Helmet Type Full-face Mask, Yu Cao, Song Xu, Seiji Hashimoto, Takahiro Kawaguchi, Yusaku Fujii, Akihiro Takita and Wei Jiang, ICTSS2020, Dec. 2020, International conference

A Reference-model-based Neural Network Control Method for Multi-input Multi-output Temperature Control System, Yuan Liu, Song Xu, Seiji Hashimoto and Takahiro Kawaguchi, ICTSS2020, Dec. 2020, International conference

Load-series Multi-port Power Converter and Centralized Power Allocation Method for a DC Microgrid Cluster, Lin-feng Sun, Wei Jiang, Seiji Hashimoto and Song Xu, Proc. of ICTSS2020, Dec. 2020, International conference

Simulation Research on Three-Phase Isolation Energy Storage Converter for Electric Vehicle, Jie-yun Wang, Wei Jiang, Barry W. Williams, Seiji Hashimoto, ICTSS2020, Dec. 2020, International conference

AI-Based Feedback Control Applicable to Process Control Systems, Seiji Hashimoto, Song Xu, Yuqi Jiang and Yuta Nishizawa, ICMEMIS2019, Dec. 2019, International conference

Nonlinear Observer-Based Sensor Fusion of IMU and GPS for Self-Localization, Yu Cao, Kan Ni, Seiji Hashimoto, ICMEMIS2019, Dec. 2019, International conference

A Neural Network-Based Framework for Control and Diagnosis in Industries, S. Hashimoto, 2019 International Conference on Industrial Applications of Big Data and Artificial Intelligence (BDAI 2019), Oct. 2019, International conference

A Novel Reference Model-Based Neural Network Approach to a Temperature Control System, Song Xu, Seiji Hashimoto and Wei Jiang, BDAI2019, Oct. 2019, Domestic conference

Development of Vibration-based Energy Harvesters and Their Application to Self-powered Systems, S. Hashimoto, International Conference on Technological and Social Innovations 2019(ICTSI2019), Jul. 2019, International conference

Design of Model Predictive Control with Nonlinear Disturbance Observer for Electric Power Steering System, Yu Fujimura, Seiji Hashimoto, David Banjerdpongchai, SICE ISCS2019, Mar. 2019, International conference

Pole-Zero Cancelation Method for Multi-input Multi-output Temperature Control system, S. Xu, and S. Hashimoto, ICTSS2018, Nov. 2018, International conference

An Overview of Self-Powered Energy Harvester based on Vibration, S. Hashimoto, S. Matsumoto, A. Basari, K. Suto, H. Okada, H. Okuno, and Y. Kawashima, ICTSS2018, Apr. 2018, International conference

Experimental Verification of Slow Mode Based Control Method with Decoupling Compensation for MIMO System, S. Xu, S. Hashimoto, T. Kihara, K. Izaki, and R. Ikeda, ICTSS2018, Apr. 2018, International conference

A Design Method of Sliding Mode Controller for EPS System Combined With Vehicle Motion, Yu Fujimura, Yuta Matsumoto, and Seiji Hashimoto, ICTSS2018, Apr. 2018, International conference

A Novel Multi-point Temperature Control Method Based on Slow Response Mode, S. Hashimoto, Y. Liu, K. Yoshida, K. Izaki, T. Kihara, R. Ikeda and W. Jiang, IEEE IECON2017, Nov. 2017, International conference

Disturbance Rejection Evaluation of Slow-Mode Based Control for MIMO Delay System, Y. Jiang, L. Yuan, S.Xu, K. Yoshida, S. Hashimoto, K. Izaki, T. Kihara, R. Ikeda and W. Jiang, ICMEMIS2017, Nov. 2017, International conference

A Flapping-Based Piezoelectric Power Generator for Bicycle Applications, T. Ishii, T. Iwase, S. Hashimoto, B. Homma, K. Suto, H. Okada, H. Okuno and S. Kumagai, IEEE ISIE2017, Jul. 2017, International conference

Multi-point Temperature Control Method Based on Slow Response Mode, S. Hashimoto, Y. Liu, K. Yoshida, K. Izaki, H. Okada and R. Ikeda, IEEE AIM2017, Jul. 2017, International conference

Sliding Mode Observer-based Precise Vehicle State Estimation for EPS Systems, S. Hashimoto, and Y. Fujimura, ICMEMIS2017, Apr. 2017, International conference

DC Micro-Grid Contactless Power Supply System with Load Detecting Control Method, S. Xu, S. Hashimoto, and W. Jiang, ICMEMIS2017, Apr. 2017, International conference

A non-intrusive magnetic energy scavanger for renewable power generation state monitoring, Wei Jiang, Jingying Lu, Seiji Hashimoto, Fulong Li and Zhengyu Lin, IEEE ICRERA2016, Nov. 2016, International conference

Evaluation of Impact Mode-Based Piezoelectric Power Generator, S. Hashimoto, A. Basari, T. Iwase, B. Homma, H. Okada, H. Okuno, and S. Kumagai, IEEE ICIEA2016, Jun. 2016, International conference

Evaluation on Mechanical Impact Parameters in Piezoelectric Power Generation, 10th Asian Control Conf. 2015 (ASCC2015), 2015

Development of a Torque-Sensorless Viscometer for Food Processing Applications, 2015 Int. Conf. on Advanced Mechatronic Systems(ICAMechs2015), 2015

衝撃方式による圧電素子を用いた振動発電特性の評価, 電気学会第５回栃木支所・群馬支所合同研究発表会, 2015

振動発電用圧電デバイスの形状効果に対する実験解析, 電気学会第５回栃木支所・群馬支所合同研究発表会, 2015

電動パワーステアリングシステムの模擬試験装置の開発, 電気学会第５回栃木支所・群馬支所合同研究発表会, 2015

最大電力点追従制御法の振動発電への適用可能性, 平成２７年電気学会産業応用部門大会, 2015

インピーダンス制御によるEPSシミュレータの開発, 平成２７年電気学会産業応用部門大会, 2015

Evaluation on Mechanical Impact Parameters in Piezoelectric Power Generation, 10th Asian Control Conf. 2015 (ASCC2015), 2015

Development of a Torque-Sensorless Viscometer for Food Processing Applications, 2015 Int. Conf. on Advanced Mechatronic Systems(ICAMechs2015), 2015

Comparison and Evaluation of Vibration-Based Piezoelectric Power Generators, Int. Power Electronics Conf. (IPEC2014), 2014

Analysis and Design of Power Management Scheme for an On-Board Solar Energy Storage System, Int. Power Electronics Conf. (IPEC2014), 2014

Quantitative Investigation of Energy Conversion in Monolithic Cantilever-Based Piezoelectric Energy Harvester, IEEE Int. Power Electronics and Application Conf. and Exposition (PEAC'2014), 2014

振動発電デバイスの共周波数変化に対する効率比較, 電気学会第４回栃木支所・群馬支所合同研究発表会, 2014

高効率発電のための構造体に対する応力解析と実験検証, 電気学会第４回栃木支所・群馬支所合同研究発表会, 2014

振動発電用圧デバイスの最適形状に関する研究, 電気学会第４回栃木支所・群馬支所合同研究発表会, 2014

外乱オブザーバ補償を用いたXYステージによる多自由度加振装置の構築, 電気学会第４回栃木支所・群馬支所合同研究発表会, 2014

ディジタル技術によるCD-SEMの知能化テンプレートマッチング手法, 電気学会第４回栃木支所・群馬支所合同研究発表会, 2014

圧電素子を用いたセルフンシグアクチュエータの基礎研究 圧電素子を用いたセルフンシグアクチュエータの基礎研究, 電気学会第４回栃木支所・群馬支所合同研究発表会, 2014

振動発電デバイスに対する荷重条件と高出力化の考察, 電気学会第４回栃木支所・群馬支所合同研究発表会, 2014

インピーダンス整合を考慮した振動発電デバイスの発電効率改善, 平成２６年電気学会産業応用部門大会, 2014

多モード形状による高出力振動発電のための応力解析と実験検証, 平成２６年電気学会産業応用部門大会, 2014

Experimental Analyses on L-Shape PZT Vibration Power Generator Operates in Bending-Shear Mode, 第57回自動制御連合講演会, 2014

サーボシステムによる自動車振動の高精度再現手法, 第57回自動制御連合講演会, 2014

振動発電に対する車載用省電力機器のための整流回路の特性評価, 電気学会第５回栃木支所・群馬支所合同研究発表会, 2014

Comparison and Evaluation of Vibration-Based Piezoelectric Power Generators, Int. Power Electronics Conf. (IPEC2014), 2014

Analysis and Design of Power Management Scheme for an On-Board Solar Energy Storage System, Int. Power Electronics Conf. (IPEC2014), 2014

Quantitative Investigation of Energy Conversion in Monolithic Cantilever-Based Piezoelectric Energy Harvester, IEEE Int. Power Electronics and Application Conf. and Exposition (PEAC'2014), 2014

Experimental Analyses on L-Shape PZT Vibration Power Generator Operates in Bending-Shear Mode, 第57回自動制御連合講演会, 2014

Multi-Mode and Multi-Axis Vibration Power Generation Effective for Vehicles, Proc. of IEEE-ISIE2013, 2013

振動発電用圧電デバイスの発電特性とインピーダンス整合, 電気学会第３回栃木支所・群馬支所合同研究発表会資料, 2013

振動発電用圧電デバイスの発電特性とエネルギー回生効率, 電気学会第３回栃木支所・群馬支所合同研究発表会資料, 2013

非線形システム同定法の精密ステージ制御への応用, 電気学会第３回栃木支所・群馬支所合同研究発表会資料, 2013

モデル規範型ニューラルネットワークによる精密ステージの制御法, 電気学会制御研究会資料, 2013

Digitally Controlled Multi-Phase Electronic Current Sink, Proc. of The 10th IEEE International Conference on Power Electronics and Drive Systems, 2013

XY ステージによる自動車振動の高精度再現手法, 平成２５年電気学会産業応用部門大会, 2013

振動発電用圧電デバイスのインピーダンス整合とエネルギー回生効率, 平成２５年電気学会産業応用部門大会, 2013

Evaluation of High-Efficiency Vibration Energy Regeneration with PZT Devices, 第56回自動制御連合講演会, 2013

Multi-Mode and Multi-Axis Vibration Power Generation Effective for Vehicles, Proc. of IEEE-ISIE2013, 2013

Digitally Controlled Multi-Phase Electronic Current Sink, Proc. of The 10th IEEE International Conference on Power Electronics and Drive Systems, 2013

Evaluation of High-Efficiency Vibration Energy Regeneration with PZT Devices, 第56回自動制御連合講演会, 2013

自動車振動向け振動発電システムの開発, 電気学会第２回栃木支所・群馬支所合同研究発表会資料, 2012

自動車振動発電を目的としたPZTデバイスの基礎特性評価, 電気学会第２回栃木支所・群馬支所合同研究発表会資料, 2012

制御工学のための高度専門教育教材の開発, 電気学会第２回栃木支所・群馬支所合同研究発表会資料, 2012

共振負荷の周波数変動に対する適応制御法の構築, 電気学会第２回栃木支所・群馬支所合同研究発表会資料, 2012

自動車走行実験と振動解析結果, 電気学会第２回栃木支所・群馬支所合同研究発表会資料, 2012

外乱オブザーバに基づく内部モデル制御法の多入出力システムへの応用, 電気学会第２回栃木支所・群馬支所合同研究発表会資料, 2012

自動車振動再現のための三軸加振機の制御系構築, 電気学会第２回栃木支所・群馬支所合同研究発表会資料, 2012

自動車振動のための多モード振動発電デバイスの開発, 電気学会第２回栃木支所・群馬支所合同研究発表会資料, 2012

ディジタル制御に基づくDIMC構造の実現とその適応化手法, 電気学会第２回栃木支所・群馬支所合同研究発表会資料, 2012

負荷変動にロバストなスイッチング電源のディジタル制御手法, 電気学会第２回栃木支所・群馬支所合同研究発表会資料, 2012

自動車振動に対する多モード振動発電デバイスの開発, 平成２４年電気学会全国大会講演論文集, 2012

自動車振動に対する多軸振動発電デバイスの開発, 平成２４年電気学会全国大会講演論文集, 2012

振動発電のための自動車走行実験とその解析, 平成２４年電気学会産業応用部門大会講演論文集, 2012

自動車用多モード振動発電装置の発電特性, 平成２４年電気学会産業応用部門大会講演論文集, 2012

Development of a Power Generation Device for Multi-Mode Vibration in Automobiles, Prof. of ICAMechS2012, 2012

Construction of Multi-Axis Vibration Control System for Vibration Reproduction in Vehicles, Prof. of ICAMechS2012, 2012

Development of Multi-axis Vibration Power Generation Device for Automobiles, Prof. of ICAMechS2012, 2012

Multi-Mode Vibration-Based Power Generation for Automobiles, Proc. of The 2012 IEEE-IAS Annual Meeting, 2012

Adaptive Identification and Control for Digital Control-Based Switching Power Supply System, Proc. of Asia-Pacific Power and Energy Engineering Conference (APPEEC2012), 2012

Identification and Power Electronic Module Design of a Solar Powered Hydrogen Electrolyzer, Proc. of Asia-Pacific Power and Energy Engineering Conference (APPEEC2012), 2012

Development of a Power Generation Device for Multi-Mode Vibration in Automobiles, Prof. of ICAMechS2012, 2012

Construction of Multi-Axis Vibration Control System for Vibration Reproduction in Vehicles, Prof. of ICAMechS2012, 2012

Development of Multi-axis Vibration Power Generation Device for Automobiles, Prof. of ICAMechS2012, 2012

Multi-Mode Vibration-Based Power Generation for Automobiles, Proc. of The 2012 IEEE-IAS Annual Meeting, 2012

Adaptive Identification and Control for Digital Control-Based Switching Power Supply System, Proc. of Asia-Pacific Power and Energy Engineering Conference (APPEEC2012), 2012

Identification and Power Electronic Module Design of a Solar Powered Hydrogen Electrolyzer, Proc. of Asia-Pacific Power and Energy Engineering Conference (APPEEC2012), 2012

外乱オブザーバに基づく内部モデル制御によるDPWMコンバータの制御法, 電気学会第１回栃木支所・群馬支所合同研究発表会資料, 2011

ディジタル・アナログ混在スイッチング電源のリミットサイクル振動低減法, 平成２３年度電気学会産業応用部門大会講演論文集, 2011

Generation of Optimal Voltage Reference for Digital Control-Based Switching Power Supply, Proc. of Asia-Pacific Power and Energy Engineering Conference (APPEEC2011), 2011

Control System Design Using Actuators with Constraints on Time and Space Resolutions, Proc. of The 6th IEEE Conf. on Industrial Electronics and Applications (ICIEA2011), 2011

周波数追従機構を有するモデルベースド制御系の構築, 電気学会第１回栃木支所・群馬支所合同研究発表会資料, 2011

精密ステージに対する目標値追従性を考慮した可変構造制御時の過渡応答補償法, 電気学会第１回栃木支所・群馬支所合同研究発表会資料, 2011

DPWMコンバータの入力電圧推定と出力電圧振動低減法, 平成２２年度電気学会全国大会講演論文集, 2011

Generation of Optimal Voltage Reference for Digital Control-Based Switching Power Supply, Proc. of Asia-Pacific Power and Energy Engineering Conference (APPEEC2011), 2011

Control System Design Using Actuators with Constraints on Time and Space Resolutions, Proc. of The 6th IEEE Conf. on Industrial Electronics and Applications (ICIEA2011), 2011

学習理論に基づく適応制御系の構築と状態推定法, 平成２１年度電気学会全国大会, 2010

ディジタル制御に基づくスイッチング電源の振動低減手法, 平成２２年度電気学会産業応用部門大会, 2010

Development of Intelligent Switching Power Supply Based on Advanced Digital Control, The 5th IEEE Conf. on Industrial Electronics and Applications (ICIEA2010), 2010

参照モデルと学習理論に基づいた一制御法, 平成２２年度電気学会産業応用部門大会, 2010

時間・空間分解能制約付きアクチュエータによる位置制御系の開発, 平成２１年度電気学会全国大会, 2010

遺伝的アルゴリズムに基づく摩擦力を考慮した非線形システムの同定法, 平成２１年度電気学会全国大会, 2010

ディジタル制御に基づくスイッチング電源の最適目標電圧生成手法, 電気学会産業計測研究会資料, 2010

Development of Intelligent Switching Power Supply Based on Advanced Digital Control, The 5th IEEE Conf. on Industrial Electronics and Applications (ICIEA2010), 2010

Identification Model-Based Control System Design for Semiconductor Manufacturing Equipment, 4th IEEE Conf. on Industrial Electronics and Applications (ICIEA2009), 2009

目標軌跡を考慮した可変構造制御時の過渡応答補償法, 平成２０年度電気学会全国大会, 2009

一定振幅・離散時間入力に基づく位置制御法, 平成２０年度電気学会全国大会, 2009

Synthesized Design of Flexible Structures for Semiconductor Manufacturing Equipments, 4th Int. Conf. on Experimental Mechanics (ICEM2009), 2009

Identification Model-Based Control System Design for Semiconductor Manufacturing Equipment, 4th IEEE Conf. on Industrial Electronics and Applications (ICIEA2009), 2009

Synthesized Design of Flexible Structures for Semiconductor Manufacturing Equipments, 4th Int. Conf. on Experimental Mechanics (ICEM2009), 2009

角度依存摩擦特性を考慮したシステム同定法に関する検討, 平成２０年度電気学会産業応用部門大会, 2008

Model Predictive Control of Precision Stages with Nonlinear Friction, IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM2008), 2008

Identification and Control of Precision XY Stages with Active Vibration Suppression System, 13th International Conference on Power Electronics and Motion Control Conference (EPE-PEMC2008), 2008

Integrated Design and Control of Precision XY Stages with Active Vibration Isolator, 18th International Conference on Electrical Machines (ICEM'08)}, 2008

Predictive Control of Piezoelectric Actuators with Friction Drive Mechanism, 2008 IEEE International Ultrasonics Symposium (IUS2008), 2008

ディジタル制御に基づく汎用スイッチング電源の開発, 平成２０年度電気学会産業応用部門大会, 2008

一定振幅離散値入力を用いた機械共振系の振動抑制制御法, 日本機械学会関東支部ブロック合同講演会, 2008

Model Predictive Control of Precision Stages with Nonlinear Friction, IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM2008), 2008

Identification and Control of Precision XY Stages with Active Vibration Suppression System, 13th International Conference on Power Electronics and Motion Control Conference (EPE-PEMC2008), 2008

Integrated Design and Control of Precision XY Stages with Active Vibration Isolator, 18th International Conference on Electrical Machines (ICEM'08)}, 2008

Predictive Control of Piezoelectric Actuators with Friction Drive Mechanism, 2008 IEEE International Ultrasonics Symposium (IUS2008), 2008

可変忘却要素を用いた適応同定法による超精密ステージの摩擦補償法, 平成１９年度電気学会産業応用部門大会講演論文集, 2007

スイッチング電源のロバストディジタル制御法に関する基礎研究, 平成１９年度電気学会産業応用部門大会講演論文集, 2007

Disturbance Observer-Based Internal Model Control With An Adaptive Mechanism for Linear Actuators, SICE Annual Conference 2007, 2007

Material Tester Using a Controlled Oscillator and an Inertial Mass, 8th International Symposium on Measurement Technology and Intelligent Instruments(ISMTII2007), 2007

Analysis of a Small Generator Using Flux Tube Method and MATLAB, International Conference on Electrical Machines and Systems(ICEMS2007), 2007

Materials Testers Using Micro-Newton Level Forces Based on the Levitation Mass Method (LMM), 2nd IEEE Conf. on Industrial Electronics and Applications(ICIEA2007), 2007

High-Precision Control of Linear Actuators based on Internal Model Control, 2nd IEEE Conf. on Industrial Electronics and Applications(ICIEA2007), 2007

Adaptive Friction Compensation Design for Submicrometer Positioning of High Precision Stage, 4th International Conference on Mechatronics(ICM2007), 2007

High-Precision Control of Linear Actuators based on Internal Model Control, 14th International Conference on Mechatronics and Machine Vision in Practice 2007 (M2VIP2007), 2007

Evaluation of the Dynamic Properties of a Voice Coil Motor (VCM), 14th International Conference on Mechatronics and Machine Vision in Practice 2007 (M2VIP2007), 2007

Disturbance Observer-Based Internal Model Control With An Adaptive Mechanism for Linear Actuators, SICE Annual Conference 2007, 2007

Material Tester Using a Controlled Oscillator and an Inertial Mass, 8th International Symposium on Measurement Technology and Intelligent Instruments(ISMTII2007), 2007

Analysis of a Small Generator Using Flux Tube Method and MATLAB, International Conference on Electrical Machines and Systems(ICEMS2007), 2007

Materials Testers Using Micro-Newton Level Forces Based on the Levitation Mass Method (LMM), 2nd IEEE Conf. on Industrial Electronics and Applications(ICIEA2007), 2007

High-Precision Control of Linear Actuators based on Internal Model Control, 2nd IEEE Conf. on Industrial Electronics and Applications(ICIEA2007), 2007

Adaptive Friction Compensation Design for Submicrometer Positioning of High Precision Stage, 4th International Conference on Mechatronics(ICM2007), 2007

High-Precision Control of Linear Actuators based on Internal Model Control, 14th International Conference on Mechatronics and Machine Vision in Practice 2007 (M2VIP2007), 2007

Evaluation of the Dynamic Properties of a Voice Coil Motor (VCM), 14th International Conference on Mechatronics and Machine Vision in Practice 2007 (M2VIP2007), 2007

Modeling and Deterioration Diagnosis of Catalyst on Vehicle by Variable Forgetting Factor-Based On-Line Identification Method, Proc. of the 14th IFAC Symposium on System Identification(SYSID-2006), 2006

An Engine Control Systems Design for Low Emission Vehicles by Generalized Predictive Control based on Identified Model, Proc. of IEEE International Conference on Control Applications(CCA2006), 2006

二段階設計法に基づく一般化予測制御によるエンジン制御系の設計, 第６回制御部門大会資料, 2006

内部モデル制御に基づく高応答・高精度制御手法, 電気学会産業計測研究会資料, 2006

Variable Forgetting Factor-Based Friction Compensation Method of Precision Stages, SICE-ICASE International Joint Conference 2006, 2006

Accurate Friction Compensation for a High Precision Stage using a Synchronous Piezoelectric Device Driver, the Advanced Motion Control 2006 Conference, 2006

Modeling and Deterioration Diagnosis of Catalyst on Vehicle by Variable Forgetting Factor-Based On-Line Identification Method, Proc. of the 14th IFAC Symposium on System Identification(SYSID-2006), 2006

An Engine Control Systems Design for Low Emission Vehicles by Generalized Predictive Control based on Identified Model, Proc. of IEEE International Conference on Control Applications(CCA2006), 2006

Variable Forgetting Factor-Based Friction Compensation Method of Precision Stages, SICE-ICASE International Joint Conference 2006, 2006

Accurate Friction Compensation for a High Precision Stage using a Synchronous Piezoelectric Device Driver, the Advanced Motion Control 2006 Conference, 2006

Analysis of a Brushless DC Motor by the Method Coupling MATLAB/Simulink and Finite Element Method, ISHIKAWA TAKEO,HASHIMOTO SEIJI, Proc of International Power Electronics Conference (IPEC2005), Apr. 2005

Gain-Scheduled Control of a High-Precision Stage for Continuous-Path Tracking, Proc of International Power Electronics Conference (IPEC2005), 2005

Variable Frequency Control for SPIDER-Driven Ultra-Precision Stages, Proc. of the 16th International Federation of Automatic Control World Congress(IFAC'05), 2005

SPIDER駆動精密ステージの位置決め制御における実験的摩擦補償法, 電気学会産業計測制御研究会資料, 2005

非共振型超音波アクチュエータを用いた精密ステージの連続軌跡追従制御系の構成法, 電気学会産業計測制御研究会資料, 2005

遺伝的アルゴリズムを用いた集中巻ブラシレスDCモータのロータ設計, 平成１７年電気学会全国大会講演論文集, 2005

DSPを用いたランダムPWM法による誘導機の振動特性, 平成１７年電気学会全国大会講演論文集, 2005

半導体産業の精密ステージとモーションコントロール, 平成１７年度電気学会産業応用部門大会講演論文集, 2005

Fast Motion Control of High Precision Stage using SPIDER, 第９回運動と振動の制御シンポジウム(D&D2005)資料, 2005

適応オブザーバに基づく次世代露光装置用超精密ステージの静止摩擦補償法, 電気学会産業計測研究会資料, 2005

Gain-Scheduled Control of a High-Precision Stage for Continuous-Path Tracking, Proc of International Power Electronics Conference (IPEC2005), 2005

Variable Frequency Control for SPIDER-Driven Ultra-Precision Stages, Proc. of the 16th International Federation of Automatic Control World Congress(IFAC'05), 2005

Analysis of a PM Motor Drive System by a Coupled Method with MTLAB and FEM, ISHIKAWA TAKEO,HASHIMOTO SEIJI, The 11th biennial IEEE conference on Electromagnetic Field Computation, Jun. 2004

Ultra-Precision Stage Control Based on Friction Model of Non-Resonant Ultrasonic Motor, Proc. of the 8th IEEE International Workshop on Advanced Motion Control (AMC’04), 2004

摩擦モデルに基づく非共振型超音波アクチュエータ駆動精密ステージの一制御法, 電気学会産業計測制御研究会資料, 2004

外乱オブザーバを用いたマスター・スレーブ系のモデル化と制御, 平成１６年電気学会全国大会講演論文集, 2004

振動制御のための柔軟構造物の高精度モデリング手法, 平成１６年電気学会全国大会講演論文集, 2004

非共振型アクチュエータを用いた超精密ステージに対する摩擦特性の検証と位置制御法, 平成１６年電気学会全国大会講演論文集, 2004

MATLABと有限要素法による永久磁石同期電動機駆動システムの解析, 平成１６年電気学会全国大会講演論文集, 2004

On-Line Identification Method of Static Friction for Ultra-Precision Positioning, Proc. of the SICE Annual Conference 2004, 2004

超精密ステージ駆動用非共振型超音波アクチュエータの周波数可変制御法, 平成１６年電気学会産業応用部門大会講演論文集, 2004

非共振型アクチュエータ(SPIDER)を用いた精密ステージの高速位置決め制御法, 平成１６年度電気関係学会東北支部連合大会講演論文集, 2004

非共振型アクチュエータを用いた精密ステージの位置制御法, 第４７回自動制御連合講演会資料, 2004

Ultra-Precision Stage Control Based on Friction Model of Non-Resonant Ultrasonic Motor, Proc. of the 8th IEEE International Workshop on Advanced Motion Control (AMC’04), 2004

On-Line Identification Method of Static Friction for Ultra-Precision Positioning, Proc. of the SICE Annual Conference 2004, 2004

Development of an Ultra-Precision Stage Control System Using Nonresonant Ultrasonic Motor, Proc. of the 29th Annual Conference of the IEEE Industrial Electronics Society(IECON'03), 2003

PM型リニアモータの推力特性の最適設計, 平成１５年電気学会全国大会講演論文集, 2003

次世代超精密ステージ機構用アクチュエータの位置制御系の開発, 電気学会産業計測制御研究会資料, 2003

数種類の埋込み磁石構造電動機の特性比較, 電気学会研究会資料, 2003

静止摩擦を考慮した超精密ステージによる位置制御法, 平成１５年電気学会産業応用部門大会講演論文集, 2003

Development of an Ultra-Precision Stage Control System Using Nonresonant Ultrasonic Motor, Proc. of the 29th Annual Conference of the IEEE Industrial Electronics Society(IECON'03), 2003

Derivation of Modal Parameters of a Flexible Structure based on the Multi-Decimation Identification Method, Proc. of the IEEE International Symposium on Industrial Electronics(ISIE 2002), 2002

Construction of Navigation and Control Systems of A Large-Scale Unmanned Helicopter Based on Identified Model, Proc. of the 15th International Federation of Automatic Control World Congress(IFAC'02), 2002

自律飛行を目的とした大型無人ヘリコプタの航法・制御系の構成, 日本機械学会関東支部第８期総会講演会資料, 2002

センサフュージョンによる飛行状態推定システムの構築, 平成１４年電気学会産業応用部門全国大会講演論文集, 2002

制御入力飽和を考慮したロバスト飛行制御系設計法, 平成１４年電気学会産業応用部門全国大会講演論文集, 2002

Derivation of Modal Parameters of a Flexible Structure based on the Multi-Decimation Identification Method, Proc. of the IEEE International Symposium on Industrial Electronics(ISIE 2002), 2002

Construction of Navigation and Control Systems of A Large-Scale Unmanned Helicopter Based on Identified Model, Proc. of the 15th International Federation of Automatic Control World Congress(IFAC'02), 2002

Design of Robust Controllers with Constraints on the Control Signal -Application for Brushless D.C. Drives, HASHIMOTO SEIJI, Proc. of the 27th Annual Conference of the IEEE Industrial Electronics Society(IECON'01), Nov. 2001

Expert System Based Diagnosis of a Two-Mass System Using Advanced Identification Techniques, HASHIMOTO SEIJI, Proc of 3rd IEEE-SDEMPED Conference, Sep. 2001

Flexible Structure's Identification and Robust Vibration Suppression Control, HASHIMOTO SEIJI, Proc. of 9-th EPE Conference, Aug. 2001

Robust Control Design Based on Identified Model for Autonomous Flight System of an Unmanned Helicopter, Proc. of the 27th Annual Conference of the IEEE Industrial Electronics Society(IECON'01), 2001

Robust Control Design Based on Identified Model for Autonomous Flight System of an Unmanned Helicopter, Proc. of the 27th Annual Conference of the IEEE Industrial Electronics Society(IECON'01), 2001

Active Vibration Suppression of Flexible Structures with Force Limitation ---Different Control Approaches, Proc. of the 7th International Conference on Optimization of Electrical and Electronic Equipments (OPTIM2000), 2000

Implementation of a Fuzzy Controller for Vibration Suppression -Application for Flexible Structures, Proc. of the 9th International Conference on Power Electronics and Motion Control (PEMC2000), 2000

Fuzzy Logic Based Vibration Suppression Control of Flexible Structures, Proc. of the 6th International Workshop on Advanced Motion Control (AMC2000), 2000

System Identification Experiments on a Large-Scale Unmanned Helicopter for Autonomous Flight, Proc. of IEEE International Conference on Control Applications(CCA2000), 2000

Active Vibration Suppression Control of Flexible Structures by Scheduled H infinity Control Considering the Control Force Saturation, Proc. 35th IEEE-IAS Annual Meeting, 2000

Implementation of a Fuzzy Controller for Vibration Suppression -Application for Flexible Structures, Proc. of the 9th International Conference on Power Electronics and Motion Control (PEMC2000), 2000

Active Vibration Suppression of Flexible Structures with Force Limitation ---Different Control Approaches, Proc. of the 7th International Conference on Optimization of Electrical and Electronic Equipments (OPTIM2000), 2000

Fuzzy Logic Based Vibration Suppression Control of Flexible Structures, Proc. of the 6th International Workshop on Advanced Motion Control (AMC2000), 2000

System Identification Experiments on a Large-Scale Unmanned Helicopter for Autonomous Flight, Proc. of IEEE International Conference on Control Applications(CCA2000), 2000

Active Vibration Suppression Control of Flexible Structures by Scheduled H infinity Control Considering the Control Force Saturation, Proc. 35th IEEE-IAS Annual Meeting, 2000

Two-input Disturbance Observer Design in Electric Power Steering System, Yu Fujimura, Tomokazu Abe, Seiji Hashimoto, Mitsunobu Kajitani, Jingying Lu and Wei Jiang, ICTSS2017, International conference

Online Learning Algorithm-Based High-Efficient Control of IPM Motors, Ting Yang, Ryosuke Honda, Takahiro Kawaguchi, Seiji Hashimoto, Song Xu, Masayuki Kigure and Makoto Shibuya, IEEE ICPS2021, International conference

Design of Reference-model-based Recurrent Neural Network Control for Temperature Control System, Yuan Liu, Song Xu, Shinya Kobori, Seiji Hashimoto and Takahiro Kawaguchi, IEEE ICPS2021, International conference

Patent right, 国際出願PCT/JP2021/028558

Patent right, 特願2020-177304

Patent right

Patent right

Patent right, -

Patent right, -

Patent right, -

Patent right, -

Patent right, -

Patent right, -

Patent right, -

Patent right, -

Patent right, -

Patent right, -

Patent right, -

Patent right, -

Patent right, -

31st Int. Invention, Innovation and Technology Exhibition 2020 (ITEX2020) Gold medal, Low Sampling Rate Cutting Machine's Vibration Inspection via CNN, Nov. 2020

UTeMEX2019 Gold medal, Fault Diagnosis with Convolutional Neural Network, Oct. 2019, International society, Malaysia

Apr. 2019, Others

Best Application Paper Award, 2012

2007

Best Student Paper Award, 2007

SICE Annual Conference Young Author's Award finalist, 2004

IEEE IES, Best Presentation Award, 2003

IEEE IES, Best Presentation Award, 2001

2021

2021

2021

2021

2020

2020

2020

2019

2019, 2021

2019

2018

2018

2018

2018, 2019

2017

2016, 2018

2016, 2017

2016, 2017

2015

2015

2015

2015

2014

2014

2014

2014, 2015

2012

2012, 2013

2011

2011

2011, 2012

2009

2010

2018

2019

Development of Engine Control System for Low Emission Vehicles, Public/Private Cooperative Joint Researches, Competitive research funding

Development of Ultra Precision Stage System for Semiconductor Manufacturing, Public/Private Cooperative Joint Researches, Competitive research funding

Development of Intelligent Digital Control-Based Power Supply, Public/Private Cooperative Joint Researches, Competitive research funding

Development of Vibration Power Generation Device, Public/Private Cooperative Joint Researches, Competitive research funding