Researcher Profile and Settings

Researcher

• Name

  HASHIMOTO Seiji

Affiliation

• Division of Electronics and Mechanical Engineering（Department of Intelligence and Control）, Professor

Profile and Settings

• Name

  Hashimoto, Seiji

Alternate Names

• HASIMOTO Seiji

Foreign language

• Use in presentation

  English

• Use in publication

  English

Affiliation

• Gunma University
• Gunma University, Professor

Affiliation

• Affiliation

  Graduate School of Science and Technology

• Job title

  Associate Professor

Education

• 1999, Utsunomiya University, Graduate School of Engineering

Association Memberships

• Institute of Electrical and Electronics Engineers (IEEE)
• SICE
• The Institute of Electrical Engineers of Japan
• Jun. 2025, 9999

Research Experience

• 2016, Gunma University, Prof lv
• 1996, 1999
• 1999, 2000, Utsunomiya University
• 2000, 2002, National Institute of Technology, Oyama College, Department of Mechanical Engineering
• 2004
• 2013
• 1996, 1999, Research Fellow of the Japan Society for the Promotion of Science
• 1999, 2000, SVBL Researcher for Utsunomiya University
• 2000, 2002, Research Associate, Dept. of Mechanical Eng., Oyama National College of Technology

Research Activities

Research Areas

• Manufacturing technology (mechanical, electrical/electronic, chemical engineering), Control and systems engineering

Research Interests

• Motion Control
• Robust Control
• Precise Positioning
• System Identification
• Engine Control
• Renewable Energy
• Vibration Power Generation
• Motion Control, Robust Control, Precise Positioning, System Identification, Engine Control, Renewable Energy, Vibration Power Generation

Published Papers

• Output Feedback Adaptive Tracking Control for Uncertain Strict-Feedback Nonlinear Systems With Full State Constraints and Unknown Output Gain, Zhenlin Wang, Seiji Hashimoto, Pengqiang Nie, Song Xu, Takahiro Kawaguchi, May 2026, Sensors, 26, 10, 1, 19, Scientific journal

  DOI
• Co-Design Method for Energy Management Systems in Vehicle-Grid Integrated Microgrids From HIL Simulation to Embedded Deployment, Yan Chen, Takahiro Kawaguchi, Seiji Hashimoto, Apr. 2026, Electronics, 15, 9, 1, 20, Scientific journal

  DOI
• Operation Prediction of a Gasification-Based Waste Treatment Plant Using Deep Learning, Shunsuke Arai, Kentaro Mitsuma, Takahiro Kawaguchi, Keiichi Kaneko, Seiji Hashimoto, Apr. 2026, Modelling, 7, 2, 1, 21, Scientific journal

  DOI
• Control and Management of a Multi-port DC-DC Converter with Wireless Power Link Applicable for PV-Battery Systems, Pengqiang Nie, Song Xu, Seiji Hashimoto and Wei Jiang, Jun. 2026, IEEE Trans. on Power Electronics, 41, 6, 10440, 10453, Scientific journal

  DOI
• Dual-layer Multi-Port High-Gain DC-DC Power Converter with Hybrid Voltage/Current Distribution Strategy, Lijuan Wang, Feng Zhou, Pengqiang Nie, Seiji Hashimoto, and Takahiro Kawaguchi, Mar. 2026, Electronics, 15, 7, 1, 27, Scientific journal

  DOI
• A Multi-Port Wireless Energy Interaction System Based on LC Resonance and Multi-coil Coupling, Xun Chen, Yujie Wang, Song Xu, Pengqiang Nie, Wei Jiang and Seiji Hashimoto, Mar. 2026, Symmetry, 18, 3, 1, 23, Scientific journal

  DOI
• An Intelligent Multi-port Temperature Control Scheme with Open-Circuit Fault Diagnosis for Aluminum Heating Systems, Song Xu, Yiqi Rui, Lijuan Wang, Pengqiang Nie, Wei Jiang, Linfeng Sun and Seiji Hashimoto, Jan. 2026, Processes, 14, 2, 1, 26, Scientific journal

  DOI
• A Comprehensive Review of Magnetic Coupling Mechanisms, Compensation Networks, and Control Strategies for Electric Vehicle Wireless Power Transfer Systems, Yanxia Wu, Pengqiang Nie, Zhenlin Wang, Lijuan Wang, Seiji Hashimoto, and Takahiro Kawaguchi, Jan. 2026, Processes, 14, 287, 1, 38, Scientific journal

  DOI
• Random forest-based speed forecasting and carbon capture optimization for shipboard integrated energy systems, Song Xu, Zikun Zhou, Linfeng Sun, Pengqiang Nie, Seiji Hashimoto, Wei Jiang, Dec. 2025, Energy Conversion and Management: X, 29, 101467, 1, 12, Scientific journal

  DOI
• Soft-Switching, Duty-Cycle-Extended Two-Phase Interleaved Buck with Positive Inductor Coupling for High-Density Consumer Electronics Power Supplies, Zhengyang Zhang, Song Xu, Seiji Hashimoto, and Wei Jiang, Dec. 2025, Symmetry, 17, 2126, 1, 19, Scientific journal

  DOI
• Prescribed Performance Adaptive Fault-Tolerant Control for Nonlinear System with Actuator Faults and Dead Zones, Zhenlin Wang, Seiji Hashimoto, Nobuyuki Kurita, Pengqiang Nie, Song Xu, and Takahiro Kawaguchi, Nov. 2025, Symmetry, 17, 11, 1, 22, Scientific journal

  DOI
• A Discrete Space Vector Modulation MPC-Based Artificial Neural Network Controller for PMSM Drives, Jiawei Guo, Takahiro Kawaguchi, Seiji Hashimoto, Oct. 2025, Machines, 13, 11, 1, 14, Scientific journal

  DOI
• Detection and classification of low voltage series arc faults based on RF-Adaboost-SHAP, Lichun Qi, Takahiro Kawaguchi, and Seiji Hashimoto, Sep. 2025, Electronics, 14, 19, 1, 13, Scientific journal

  DOI
• A Non-Isolated High Gain Step-Up DC/DC Converter Based on Coupled Inductor with Reduced Voltage Stresse, Yuqing Yang, Song Xu, Wei Jiang and Seiji Hashimoto, Aug. 2025, Journal of Low Power Electronics and Applications, 15, 3, 1, 21, Scientific journal

  DOI
• The Voltage Regulation of Boost Converters via a Hybrid DQN–PI Control Strategy under Large-Signal Disturbances, Pengqiang Nie, Yanxia Wu, Zhenlin Wang, Song Xu, Seiji Hashimoto, and Takahiro Kawaguchi, Jul. 2025, Processes, 13, 7, 1, 19, Scientific journal

  DOI
• A Coordinated Communication and Power Management Strategy for DC Converters in Renewable Energy Systems, Feng Zhou, Takahiro Kawaguchi, Seiji Hashimoto, and Wei Jiang, Jun. 2025, Energies, 18, 13, 1, 19, Scientific journal

  DOI
• Series Arc Fault Detection Based On Improved Artificial Hummingbird Algorithm Optimizer Optimized XGboost, Lichun Qi, Takahiro Kawaguchi and Seiji Hashimoto, Jun. 2025, Applied Sciences, 18, 13, 1, 16, Scientific journal

  DOI
• Fault Diagnosis of Wire Disconnection in Heater Control System using One-dimensional Convolutional Neural Network, Jiawei Guo, Linfeng Sun, Takahiro Kawaguchi, and Seiji Hashimoto, Feb. 2025, Processes, 13, 2, 1, 14, Scientific journal

  DOI
• Enhanced Pure Pursuit Path Tracking Algorithm for Mobile Robots Optimized by NSGA-II with High-Precision GNSS Navigation, Xiongwen Jiang, Taiga Kuroiwa, Yu Cao, Linfeng Sun, Haohao Zhang, Takahiro Kawaguchi, Seiji Hashimoto, Jan. 2025, Sensors, 25, 3, 1, 23, Scientific journal

  DOI
• Intelligent Identification Method of Low Voltage AC Series Arc Fault Based on using Residual Model and Rime Optimiza-tion Algorithm, Xiao He, Takahiro Kawaguchi, and Seiji Hashimoto, Sep. 2024, Energies, 17, 4675, 1, 22, Scientific journal

  DOI
• Adaptive QSMO-Based Sensorless Drive for IPM Motor with NN-Based Transient Position Error Compensation, Linfeng Sun, Jiawei Guo, Xiongwen Jiang, Takahiro Kawaguchi, Seiji Hashimoto, and Wei Jiang, Aug. 2024, Electronics, 13, 2085, 1, 24, Scientific journal

  DOI
• Analyses of Roll Damping Coefficients in Hypersonic Rarefied Flows, T. Ozawa, M. Shinkai, N. Kurita, and S. Hashimoto, Aug. 2024, Journal of Evolving Space Activities, 2, 151, 1, 7, Scientific journal

  DOI
• Enhanced Mobile Robot Odometry with Error Kalman Filtering Incorporating 3D Point Cloud Intensity, Xiongwen Jiang, Taiga Kuroiwa, Haolan Zhang, Takato Yoshida, Linfeng Sun, Yu Cao, Haohao Zhang, Takahiro Kawaguchi, and Seiji Hashimoto, Jul. 2024, IEEE Access, 12, 103676, 103686, Scientific journal

  DOI
• Zero-Power Control Strategy and Dynamics Enhancement for Hybrid Maglev Conveyor Carts, Xiaowei Tang, Seiji Hashimoto, Takahiro Kawaguchi, and Nobuyuki Kurita, Jul. 2024, Electronics, 13, 2921, 1, 15, Scientific journal

  DOI
• Synthesis and Control of a Three-port LCL Resonant Wireless Power Transfer System for DC Energy Conversion Applications, Song Xu, Wei Jiang, and Seiji Hashimoto, Jul. 2024, IEEE Trans. on Power Electronics, 39, 7, 8916, 8927, Scientific journal

  DOI
• Development of A Conveyor Cart with Magnetic Levitation Mechanism Based on Multi Control Strategies, Xiaowei Tang, Seiji Hashimoto, Kurita Nobuyuki, Takahiro Kawaguchi, Eiji Ogiwara, Nobuya Hishinuma and Keisuke Egura, Jul. 2024, Applied Sciences, 13, 19, 1, 16, Scientific journal

  DOI
• Real-time Simulation System for Small Scale Regional Integrated Energy Systems, Wei Jiang, Renjie Qi, Song Xu, and Seiji Hashimoto, Jun. 2024, Energies, 17, 13, 1, 25, Scientific journal
• Neural Network Compensator-Based Control for Enhancing IPMSM Dynamics and Copper Loss Efficiency for Air Compressor, Jiawei Guo, Linfeng Sun, Takahiro Kawaguchi, and Seiji Hashimoto, May 2024, IEEE Access, 12, 62986, 62996, Scientific journal

  DOI
• A Novel Voltage-Current Dual-Drop Control Method for Shipboard DC Micro-Grid with Energy Storage Systems, Xun Chen, Rui Tian, Yonghong Wang, Song Xu, Wei Jiang, and Seiji Hashimoto, Apr. 2024, IEEE Access, 12, 62912, 62996, Scientific journal

  DOI
• Multi-port Energy Router for DC Grid Clusters, Linfeng Sun, Takahiro Kawaguchi, Seiji Hashimoto, and Wei Jiang, Apr. 2024, IEEE Journal of Emerging and Selected Topics in Power Electronics (JESTPE), 12, 2, 1666, 1682, Scientific journal

  DOI
• Research on the Construction of Intelligent Robot Path Recognition System Supported by Deep Learning Network Algorithm, Ni Kan, Cao Yu, Jiang Xiongwen, Zhang Haolan, Seiji Hashimoto, Ni Qiyu, Jan. 2024, Applied Mathematics, 9, 1, 1, 17, Scientific journal
• Design and Analysis of a Step-Up Multi-Port Converter Applicable for Energy Conversion in Photovoltaic Battery Systems, Siyuan Shi, Song Xu, Wei Jiang and Seiji Hashimoto, Dec. 2023, Energies, 17, 1, 1, 18, Scientific journal

  DOI
• Design and Implementation of Low-Voltage Photovoltaic System Integrated with Battery Energy Storage, Xiao He, Seiji Hashimoto, Wei Jiang, Jicheng Liu, Takahiro Kawaguchi, Mar. 2023, Energies, 16, 7, 1, 20, Scientific journal
• A Dynamic and Parallel Two-Stage Lossless Data Compression Method for Smart Grid, Yanxia Wu, Song Xu, Caiping Xi, Pengqiang Nie, Wei Jiang, and Seiji Hashimoto, Jan. 2023, IEEE Access, 11, 143475, 143485, Scientific journal

  DOI
• Online MTPA Control of IPM Motor Using NN-based Perturb and Observe Algorithm, Linfeng Sun, Jiawei Guo, Takahiro Kawaguchi, Seiji Hashimoto, and Wei Jiang, Nov. 2023, IEEE Access, 11, 122458, 122469, Scientific journal
• Very-Low-Cost Powered Air-Purifying Respirator (PAPR) “Distancing-Free Mask Industry (DFM-I) Prototype No.1” and Proposal for a Lockdown-Free Industry, Edwin Carcasona, Ronald M. Galindo, Akihiro Takita, Ethelda Magalang, Tabetha S. Galindo, Seiji Hashimoto, Takao Yamaguchi, Edgar U. Tibay, Dongwei Shu, Haruo Kobayashi, Kenji Amagai, Naoya Ohta, Noriaki Yoshiura, Anna Kuwana, Ayako Yano, and Yusaku Fujii, May 2022, Journal of Technology and Social Science, 6, 2, 1, 4, Scientific journal
• タグチメソッドを用いたIPMモータのトルク最適設計, 高田晃多，石川赴夫，橋本誠司，鈴木伸, 2022, 30, 2, Scientific journal
• Low-Cost Powered Air-Purifying Respirator (PAPR) “Distancing-Free Mask Frontline (DFM-F) Prototype No.1” for the Operational Tests in Hospitals in Cebu City, Philippines, Ronald M. Galindo, Akihiro Takita, Edwin Carcasona, Ethelda Magalang, Tabetha S. Galindo, Seiji Hashimoto, Takao Yamaguchi, Edgar U. Tibay, Dongwei Shu, Haruo Kobayashi, Kenji Amagai, Naoya Ohta, Noriaki Yoshiura, Anna Kuwana, Ayako Yano, and Yusaku Fujii, May 2022, Journal of Mechanical and Electrical Intelligent System, 5, 2, 1, 6, Scientific journal
• Recurrent Neural Network-based Temperature Control System Weight Pruning based on Nonlinear Reconstruction Error, Yuan Liu, Takahiro Kawaguchi, Song Xu and Seiji Hashimoto, 2022, Processes, 10, 44, 1, 15, Scientific journal

  DOI
• A Hardware-in-the-Loop-on-Chip Development System for Teaching and Development of Dynamic Systems, Wei Jiang, Linfeng Sun, Yan Chen, Hainin Ma and Seiji Hashimoto, Aug. 2021, Electronics, 10(7), 801, 1, 15
• An engineering approach for fighting COVID-19; Pseudo herd immunity through the complete spread of the helmet-type masks, Y. Fujii, Apr. 2021, Journal of Mechanical and Electrical Intelligent System, 4, 1, 1, 5
• Model Predictive Torque Control of Interior Permanent Magnet Synchronous Motor powered by Three-phase Four-switch Voltage-source Inverter, Ting Yang, Apr. 2021, International Core Journal of Engineering, 7, 4, 455, 461
• Control design applicable to a helmet type full-face mask, S. Xu, Y. Cao, S. Hashimoto, Y. Fujii, A. Takita, W. Jiang, Oct. 2020, Journal of Technology and Social Science, 4, 3, 24, 30
• A Reference-model-based Neural Network Control Method for Multi-input Multi-output Temperature Control System, Yuan Liu, Song Xu, Seiji Hashimoto and Takahiro Kawaguchi, Oct. 2020, Processes, 8, 1365, 1, 17

  DOI
• Switching Sequence Model Predictive Direct Torque Control of IPMSM for EV in Switch Open-circuit Fault-tolerant Mode, Ting Yang, Takahiro Kawaguchi, Seiji Hashimoto, Wei Jiang, Oct. 2020, Energies, 11, 5593, 1, 15

  DOI
• A Helmet Type Mask "Distancing-Free Mask": An Engineering Solution that Eliminates the Lockdown, Y. Fujii, A. Takita and S. Hashimoto, Sep. 2020, Journal of Mechanical and Electrical Intelligent System, 3, 3, 1, 7
• ウイルスをほぼ完全に遮蔽できるマスクの開発，および，ロックダウンを不要化する社会基盤の提案, 藤井雄作，田北啓洋，橋本誠司, Sep. 2020, 4, 1, 6, 10
• Low-sampling rate data-based failure diagnosis by using self-powered system, Shintaro Okada, Seiji Hashimoto and A A Basari, Jun. 2020, Journal of Physics: Conference Series, 1502, 1, 1, 7

  DOI
• Development of a PZT device-based power-generating shoes for disaster-affected areas, S. Tsukagoshi, K. Seto, S. Hashimoto and A. Basari, Jun. 2020, Journal of Physics: Conference Series, 1502, 1, 1, 8

  DOI
• A Reference-Model-Based Artificial Neural Network Approach for Temperature Control System, Song Xu, Seiji Hashimoto, Yuqi Jiang, Katsutoshi Izaki, Takeshi Kihara, Ryota Ikeda and Wei Jiang, Jan. 2020, Processes, 8, 1, 1, 11

  DOI
• Pole-Zero Cancellation Method for Multi Input Multi Output (MIMO) Temperature Control in Heating Process System, Song Xu; Seiji Hashimoto; Wei Jiang, Aug. 2019, Processes, 7, 8
• Slow Mode-Based Control Method for Multi-Point Temperature Control System, Song Xu; Seiji Hashimoto; Wei Jiang; Yuqi Jiang; Katsutoshi Izaki; Takeshi Kihara; Ryota Ikeda, Aug. 2019, Processes, 7, 8
• Design and Implementation of a Low Power Low Cost Digital Current-Sink Electronic Load, Wei Jiang; Jieyun Wang; Qianlong Wang; Song Xu; Seiji Hashimoto; Zhong Liu, Jul. 2019, Energies, 12, 2644
• Analysis and Design of Air-coupled DC Transformer with Hybrid Modulation Control Method, Song Xu; Wei Jiang; Seiji Hashimoto, Jul. 2019, Energies, 12, 2570
• A Torque-Sensorless Viscometer for Food Processing Applications, Y. Jiang; S. Hashimoto; Y. Yamakoshi; T. Otomo, Feb. 2019, Applied Mechanics and Materials, 888
• Disturbance Compensation in Slow-Mode Based Control for MIMO Delay System, Y. Jiang; L. Yuan; S.Xu; K. Yoshida; S. Hashimoto; K. Izaki; T. Kihara; R. Ikeda; W. Jiang, Nov. 2018, Journal of Technology and Social Science (JTSS), 2, 3
• Investigation and experimental verification of the effectiveness of the interfaced plate parameters on impact-based piezoelectric energy harvester, N. X. Yan; A. A. Basari; K. S. Leong; N. A. A. Nawir; S. Hashimoto, Oct. 2018, Ceramics International, 44, 15
• 1入力2出力SMC適用によるEPS制御の高性能化, 阿部 己和; 橋本 誠司; 梶谷 満信, Apr. 2018, 138, 4
• A REVIEW ON PIEZOELECTRIC ENERGY HARVESTER AND ITS POWER CONDITIONING CIRCUIT, Nur Amalina; Ahmad Nawir; Amat Amir Basari; Mohd Shakir; Md. Saat; Ng Xue Yan; Seiji Hashimoto, Apr. 2018, ARPN Journal of Engineering and Applied Sciences, 13, 3
• Evaluation of Interfaced Plate Parameters on Impact-Based Piezoelectric Power Generation, N. X. Yan; A. A. Basari; K. S. Leong; N. A. A. Nawir; S. Hashimoto, Apr. 2018, Journal of Telecommunication, Electronic and Computer Engineering, 10, 2
• DC Micro-Grid Contactless Power Supply System with Active Load Detecting Control Method, Song Xu; Seiji Hashimoto; Wei Jiang, Mar. 2018, Journal of Technology and Social Science, 2, 2
• Electric Power Steering System Design Based on Linear Quadratic Control, T. Abe; Y. Fujimura; T. Hirose; S. Hashimoto; M. Kajitani; K. Sato; K. Gonpei, May 2017, Journal of Technology and Social Science, 1, 2
• An Observer Design Strategy in Electric Power Steering System, Jingying Lu; Wei Jiang; Tomokazu Abe; Yu Fujimura; Seiji Hashimoto; Mitsunobu Kajitani, May 2017, Journal of Technology and Social Science, 1, 2
• High Power Output of L-shape PZT Power Generator Working in Bending-Shear Mode, A. A. Basari; S. Hashimoto, Jan. 2017, Journal of Telecommunication, Electronic and Computer Engineering, 9, 1
• Design and optimization of a wideband impact mode piezoelectric power generator, A. A. Basari; S. Hashimoto; B. Homma; H. Okada; H. Okuno; S. Kumagai, May 2016, CERAMICS INTERNATIONAL, 42, 6, 6962, 6968, Scientific journal

  DOI
• Study of the effect of mechanical impact parameters on an impact-mode piezoelectric ceramic power generator, Arnat Arnir Basari; Sosuke Awaji; Shintaro Sakamoto; Seiji Hashimoto; Bunji Homma; Kenji Suto; Hiroaki Okada; Hideki Okuno; Kojiro Kobayashi; Shunji Kumagai, Nov. 2015, CERAMICS INTERNATIONAL, 41, 9, 12038, 12044, Scientific journal

  DOI
• The Effect of the Parameters of a Vibration-Based Impact Mode Piezoelectric Power Generator, Amat A. Basari; S. Awaji; S. Sakamoto; S. Hashimoto; B. Homma; K. Suto; H. Okada; H. Okuno; K. Kobayashi; S. Kumagai, 2015, SHOCK AND VIBRATION, Scientific journal

  DOI
• Shape Effect of Piezoelectric Energy Harvester on Vibration Power Generation, A. A. Basari; S. Awaji; S. Wang; S. Hashimoto; S. Kumagai; K. Suto; H. Okada; H. Okuno; B. Homma; W. Jiang; S. Wang, Sep. 2014, Journal of Power and Energy Engineering, 2, 9
• A Simple Equivalent Circuit for Efficiency Calculation of Brushless DC Motors, Takeo Ishikawa; Takuma Tsuji; Seiji Hashimoto; Nobuyuki Kurita, 2013, 2013 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 3, 1, 1133, 1138, International conference proceedings

  DOI
• Effective energy regeneration from multi-mode-based vehicle vibration, Seiji Hashimoto; Nobuyuki Nagai; Shunji Kumagai; Makoto Kasai, 2013, International Journal of Advanced Mechatronic Systems, 5, 4, 279, 287, Scientific journal

  DOI
• Output characteristics of multi-axis vibration power generation device for automobiles, Shunji Kumagai; Makoto Kasai; Seiji Hashimoto; Nobuyuki Nagai, 2013, International Journal of Advanced Mechatronic Systems, 5, 2, 105, 112, International conference proceedings

  DOI
• Reproduction of vehicle vibration by acceleration-based multi-axis control, Nobuyuki Nagai; Seiji Hashimoto; Yoshimitsu Fujikura; Jyunpei Takahashi; Shunji Kumagai; Makoto Kasai; Kenji Suto; Hiroaki Okada, 2013, Applied Mechanics and Materials, 251, 129, 133, International conference proceedings

  DOI
• A Multi-Mode Vibration-Based Power Generator for Vehicles, Seiji Hashimoto; Nobuyuki Nagai; Yoshimitsu Fujikura; Jyunpei Takahashi; Shunji Kumagai; Makoto Kasai; Kenji Suto; Hiroaki Okada, 2013, NEW TRENDS IN MECHANICAL ENGINEERING AND MATERIALS, 251, 124, +, International conference proceedings

  DOI
• Multi-Axis Vibration Power Generation Device for Automobiles, Shunji Kumagai; Kenji Suto; Hiroaki Okada; Makoto Kasai; Seiji Hashimoto; Nobuyuki Nagai; Yoshimitsu Fujikura; Junpei Takahashi, 2013, NEW TRENDS IN MECHANICAL ENGINEERING AND MATERIALS, 251, 119, +, International conference proceedings

  DOI
• A High Precision Control Based on Learning Algorithm with Reference Model and Disturbance Observer, S. Hashimoto; H. Saitou; K. Nakajima, Aug. 2012, Journal of Advanced Science Letters
• Generation of Optimal Voltage Reference for Digital Control-Based Switching Power Supply, S. Hashimoto; S. Naka; U. Sosorhang; N. Honjo, 2011, 2011 ASIA-PACIFIC POWER AND ENERGY ENGINEERING CONFERENCE (APPEEC), JEPE11042201, International conference proceedings
• Estimation of Physical Parameters using Learning Algorithm in Precision Positioning Control, Seiji Hashimoto; Hiroki Watanabe; Kenji Nakajima, 2011, MECHATRONICS AND INTELLIGENT MATERIALS, PTS 1 AND 2, 211-212, 469, 473, International conference proceedings

  DOI
• A High Precision Positioning Control Method Based on Learning Algorithm with Reference Model, Kenji Nakajima; Hiroyuki Saitou; Seiji Hashimoto, 2011, MECHATRONICS AND INTELLIGENT MATERIALS, PTS 1 AND 2, 211-212, 671, 675, International conference proceedings

  DOI
• Instrument for Measuring the Body Mass of Astronaut, Y. Fujii; K. Shimada; K. Maru; M. Yokota; S. Hashimoto; N. Nagai; Y. Sugita, Aug. 2009, Jpn. Soc. Aeronaut. Space Sci., 7, 26, Th_1, Th_6

  DOI
• An engine control systems design for low emission vehicles by generalized predictive control based on identified model, Seiji Hashimoto; Hiroyuki Okuda; Yasushi Okada; Shuichi Adachi; Shinji Niwa; Mitsunobu Kajitani, 2007, Proceedings of the IEEE International Conference on Control Applications, 169, 3, 2411, 2416, International conference proceedings

  DOI
• 圧粉磁心を用いたリニアアクチュエータの開発, 石川,茂木; 松波,橋本; 坂本; C. Simson, Oct. 2008, 16, 3
• Material Tester Using a Controlled Oscillator and an Inertial Mass, S. Hashimoto; Y. Fujii, May 2008, Journal of Key Engineering Materials, 381-382
• Mass measuring instrument for use under microgravity conditions, Yusaku Fujii; Kazuhito Shimada; Masayuki Yokota; Seiji Hashimoto; Yoichi Sugita; Hitomi Ito, May 2008, REVIEW OF SCIENTIFIC INSTRUMENTS, 79, 5, Scientific journal

  DOI
• 一般化予測制御に基づくエンジン制御系の二段階設計法, 橋本,奥田; 岡田,足立; 丹羽,梶谷, Mar. 2008, 128, 3
• 自動車パワートレイン制御におけるシステム同定への期待, 足立,橋本, Mar. 2008, 47, 3
• Accurate friction compensation for precision stage using synchronous piezoelectric device driver, Truong Ngoc Minh; Kiyoshi Ohishi; Masasuke Takata; Seiji Hashimoto; Kouji Kosaka; Hiroshi Kubota; Tadahiro Ohmi, 2006, 9TH IEEE INTERNATIONAL WORKSHOP ON ADVANCED MOTION CONTROL, VOLS 1 AND 2, PROCEEDINGS, 127-D, 1, 109, +, International conference proceedings
• Modeling and Deterioration Diagnosis of Catalyst for Automobile Exhaust Gas by On-Line Identification Method With Variable Forgetting Factor, OKADA Yasushi; OKUDA Hiroyuki; ADACHI Shuichi; NIWA Shinji; KAJITANI Mitsunobu; HASHIMOTO Seiji, Dec. 2006, IEEJ Transactions on Industry Applications, 126-D, 12, 1637, 1644

  DOI
• A Friction Compensation Method in Positioning Control of Nonresonant Ultrasonic Actuator-Driven Precise Stage, HASHIMOTO Seiji; OHISHI Kiyoshi; KOSAKA Koji; ISHIKAWA Takeo; KUBOTA Hiroshi; OHMI Tadahiro, Jun. 2006, IEEJ Transactions on Industry Applications, Vol. 126-D, No. 6, pp. 719-725, 6, 719, 725

  DOI
• Wear reduction method for frictionally fast feeding piezoactuator, K Kosaka; T Iwabuchi; T Baba; T Endo; H Hashiguchi; H Furukawa; Y Egashira; S Hashimoto; M Touge; K Uozumi; A Nakada; H Kubota; T Ohmi, Feb. 2006, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 45, 2A, 1005, 1011, Scientific journal

  DOI
• Continuous path tracking system of high precision stage using synchronous piezoelectric device driver, T. N. Minh; K. Ohishi; M. Takata; S. Hashimoto; K. Kosaka; H. Kubota; T. Ohmi, 2006, AICAM 2005, 11-12, 121, +, International conference proceedings
• スティックスリップ補償と連続軌跡追従制御に基づく超音波アクチュエータ駆動精密ステージの一制御法, 橋本 誠司; 石川 赴夫; 大石潔; 小坂 光二; 久保田 弘; 大見 忠弘, Jun. 2005, Vol. 125-D, No.6, pp.582-589
• Analysis of a PM Motor Drive System by a Coupled Method with MATLAB and FEM, ISHIKAWA TAKEO; T. Sunaga; S. Nakamura; D. Mori; HASHIMOTO SEIJI; M. Matsunami, May 2005, KIEE International Transactions on Electrical Machinery and Energy Conversion Systems, Vol. 5-B, No. 3, pp. 229-232
• A Construction Method of High Response I-P Position Control System by Anti-Windup Compensation, HASHIMOTO SEIJI; ISHIKAWA TAKEO, Jan. 2005, IEEJ, Vol. 125-D, No. 1, 1, 117, 118

  DOI
• ACサーボ系のMATLAB/Simulinkと有限要素法による連成解析, 石川 赴夫; D. Mori; 橋本 誠司; 松波道夫, Dec. 2004, 124(12):1283-1284
• マルチデシメーション同定法を用いたロバスト制振制御のための柔軟構造物のモデリング手法, 橋本 誠司; 石川 赴夫; 足立 修一; 船渡 寛人; 神山 健三; 磯島 彰宏, May 2004, Vol. 123-D, No.5
• Optimal Design of Thrust Characteristics of Permanent Magnet Type Linear Motor Using Orthogonal Table and Multiregression Analysis, 石川 赴夫; C. Chen; 橋本 誠司; 松波 道夫, Feb. 2004, The Trans. of The IEEE Magnetics, Vol. 40, No. 2, pp. 1220-1223
• Robust active vibration suppression control with constraint on the control signal: Application to flexible structures, A. Forrai; S. Hashimoto; H. Funato; K. Kamiyama, 2003, Earthquake Engineering and Structural Dynamics, 32, 11, 1655, 1676, Scientific journal

  DOI
• Robust-Controller design with hard constraint on the control signal - application for active vibration suppression of flexible structure, A. Forrai; 橋本 誠司; 船渡 寛人; 神山 健三, Jun. 2002, Archive of Applied Mechanics, Springer, Volume 72, Issue 6-7 pp.379-39
• Structural control technology - System identification and control of flexible structures, A Forrai; S Hashimoto; H Funato; K Kamiyama, Dec. 2001, COMPUTING & CONTROL ENGINEERING JOURNAL, 12, 6, 257, 262, Scientific journal
• Autonomous Flight Control for a Large-Scale Unmanned Helicopter-System Identification and Robust Control Systems Design, Shuichi Adachi; Seiji Hashimoto; Gou Miyamori; Anzhong Tan, 2001, IEEJ Transactions on Industry Applications, 121, 12, 1278, 1283, Scientific journal

  DOI
• Robust Controller Design with Hard Constraints on the Control Signal - Application for Motion Control Systems, A. Forrai; 田野井; 橋本 誠司; 船渡 寛人; 神山 健三, Apr. 2001, Journal of Electrical Engineering, Archiv fuer Elektrotechnik, Springer, Volume 83, Issue 4 pp.179-186
• AR Based Identification and Control Approach in Vibration Suppression, 橋本 誠司; 原 賢志; 船渡 寛人; 神山 健三, Mar. 2001, The Trans. of the IEEE IAS, Vol. 37, No. 3, pp. 806-811
• Gray box identification of flexible strutures: Application to robust active vibration suppression control, A. Forrai; S. Hashimoto; A. Isojima; H. Funato; K. Kamiyama, 2001, Earthquake Engineering and Structural Dynamics, 30, 8, 1203, 1220, Scientific journal

  DOI
• System Identification of Induction Motors for Auto Tuning -Design Method to Torque Control Systems using Identified Model-, HASHIMOTO Seiji; FUNATO Hirohito; IMANARI Yutaka; KAMIYAMA Kenzo, Oct. 2000, IEEJ Transactions on Sensors and Micromachines, Vol. 120-D,No. 10,pp. 1241-124, 10, 1241, 1242

  DOI
• Vibration Suppression Control using Two Variable Parameters in a Multi-Mass System, FUNATO Hirohito; YAMAMOTO Kiyohito; HARA Kenji; HASHIMOTO Seiji; KAMIYAMA Kenzo, Aug. 1999, IEEJ Transactions on Sensors and Micromachines, Vol. 119-D, No. 8/9, 8, 1121, 1127

  DOI
• DVFC-Based Identification and its Application to Robust Vibration Suppression Control of Flexible Structures, Seiji Hashimoto; Hirohito Funato; Kenji Hara; Kenzo Kamiyama, 1999, IEEJ Transactions on Industry Applications, 119, 6, 888, 894, Scientific journal

  DOI
• 部分状態フィードバック補償による軸ねじり振動抑制制御, 原 賢志; 船渡 寛人; 橋本 誠司; 神山 健三, Feb. 1999, Vol. 119-D,No. 2,pp. 182-188, 2, 182, 188
• ２可変パラメータによる多慣性負荷系の制振制御, 船渡 寛人; 山本 麿人; 橋本 誠司; 神山 健三, Nov. 1998, Vol. 118-D,No. 11, pp. 1334-13
• ２可変パラメータによる２慣性負荷系の振動抑制制御, 橋本 誠司; 船渡 寛人; 原 賢志; 和泉 一輝; 神山 健三, Oct. 1998, Vol. 118-D, No. 10,pp. 1172-11
• 不確かさを陽に考慮した一次元H∞コントローラによる速度制御系のロバスト制振制御, 橋本 誠司; 船渡 寛人; 山本 麿人; 原 賢志; 神山 健三, May 1998, Vol. 118-D,No. 5,pp. 645-651
• ２慣性共振系の速度制御用H∞コントローラの次数低減化, 橋本 誠司; 神山 健三, Sep. 1997, Vol. 115-D,No. 8,pp. 1070-1071
• 部分状態フィードバック制御による共振負荷を持つサーボ系の設計法, 原 賢志; 橋本 誠司; 船渡 寛人; 神山 健三, Sep. 1997, Vol. 117-D,No. 9,pp. 1172-1173, 9, 1172, 1173
• 軽量一体型「自由外出マスク」～ロックダウン・外出自粛を不要化する「決め手」～, 藤井雄作，田北啓洋，橋本誠司, Mar. 2021, 5, 1, 1, 7
• Mass measuring instrument for use under microgravity conditions, Fujii, Yusaku;Shimada, Kazuhito;Yokota, Masayuki;Hashimoto, Seiji;Sugita, Yoichi;Ito, Hitomi, May 2008, REVIEW OF SCIENTIFIC INSTRUMENTS, 79, 5

  DOI
• Study of the effect of mechanical impact parameters on an impact-mode piezoelectric ceramic power generator, Basari, Arnat Arnir;Awaji, Sosuke;Sakamoto, Shintaro;Hashimoto, Seiji;Homma, Bunji;Suto, Kenji;Okada, Hiroaki;Okuno, Hideki;Kobayashi, Kojiro;Kumagai, Shunji, 2015, CERAMICS INTERNATIONAL, 41, 9, 12038, 12044

  DOI
• Analysis and Design of an Air-Coupled DC Transformer with a Hybrid Modulation Control Method, Xu, Song;Jiang, Wei;Hashimoto, Seiji, 2019, ENERGIES, 12, 13

  DOI
• Design and Implementation of a Low-Power Low-Cost Digital Current-Sink Electronic Load, Jiang, Wei;Wang, Jieyun;Wang, Qianlong;Xu, Song;Hashimoto, Seiji;Liu, Zhong, 2019, ENERGIES, 12, 13

  DOI
• Slow Mode-Based Control Method for Multi-Point Temperature Control System, Xu, Song;Hashimoto, Seiji;Jiang, Wei;Jiang, Yuqi;Izaki, Katsutoshi;Kihara, Takeshi;Ikeda, Ryota, 2019, PROCESSES, 7, 8

  DOI
• A Reference-Model-Based Artificial Neural Network Approach for a Temperature Control System, Xu, Song;Hashimoto, Seiji;Jiang, YuQi;Izaki, Katsutoshi;Kihara, Takeshi;Ikeda, Ryota;Jiang, Wei, 2020, PROCESSES, 8, 1

  DOI
• Multi-Decimation Identification-Based Modeling Method of Flexible Structures for Robust Vibration Control, HASHIMOTO Seiji;ISHIKAWA Takeo;ADACHI Shuichi;FUNATO Hirohito;KAMIYAMA Kenzo;ISOJIMA Akihiro, May 2004, IEEJ Transactions on Industry Applications, 124, 5, 471, 478
• A Construction Method of High Response I-P Position Control System by Anti-Windup Compensation, KOSAKA Koji;HASHIMOTO Seiji;OHISHI Kiyoshi;ISHIKAWA Takeo;KUBOTA Hiroshi;OHMI Tadahiro, Jan. 2005, IEEJ Transactions on Industry Applications, 125, 1, 117, 118
• Analysis of an AC Servo System by the Method Coupling MATLAB/Simulink with Finite Element Method, ISHIKAWA Takeo;MORI David;HASHIMOTO Seiji;MATSUNAMI Michio, Dec. 2004, IEEJ Transactions on Industry Applications, 124, 12, 1283, 1284
• A Friction Model-Based Control of Precision Stages Driven by Non-Resonant Ultrasonic Motor, HASHIMOTO Seiji;OHISHI Kiyoshi;KOSAKA Koji;OHISHI Takuya;ISHIKAWA Takeo;KUBOTA Hiroshi;OHMI Tadahiro, Mar. 2004, 2004, 24, 1, 6
• Design Method of Continuous Path Tracking System for Precision Stage using SPIDER, KAMIMURA Atsushi;TROUONG Ngoc Minh;OHISHI Kiyoshi;TAKATA Masasuke;HASHIMOTO Seiji;KOSAKA Kouji;KUBOTA Hiroshi;OHMI Tadahiro, Mar. 2005, 2005, 40, 73, 78
• Experimental Friction Compensation Method for SPIDER-Driven Precision Stage Control, OHISHI Takuya;HASHIMOTO Seiji;ISHIKAWA Takeo;OHISHI Kiyoshi;KOSAKA Kouji;KUBOTA Hiroshi;OHMI Tadahiro, Mar. 2005, 2005, 40, 79, 84
• A Control Method of Ultrasonic Actuator-Driven Precision Stages Based on Stick-Slip Compensation and Continuous-Path Tracking, HASHIMOTO Seiji;OHISHI Kiyoshi;KOSAKA Koji;ISHIKAWA Takeo;KUBOTA Hiroshi;OHMI Tadahiro, Jun. 2005, IEEJ Transactions on Industry Applications, 125, 6, 582, 589
• Adaptive Observer Based-Static Friction Compensation of Ultraprecision Stages for Next-Generation Semiconductor Exposure Equipment, KUROKAWA Takayuki;HASHIMOTO Seiji;OHISHI Kiyoshi;KOSAKA Koji;ISHIKAWA Takeo;KUBOTA Hiroshi;OHMI Tadahiro, Oct. 2005, 2005, 116, 45, 50
• Analysis of Radial Force and Vibration of an Induction Motor Fed by PWM Inverter, ISHIKAWA Takeo;ISOGAI Takuya;HASHIMOTO Seiji;MATSUNAMI Michio, Dec. 2005, 2005, 171, 49, 54
• A Friction Compensation Method in Positioning Control of Nonresonant Ultrasonic Actuator-Driven Precise Stage, HASHIMOTO Seiji;OHISHI Kiyoshi;KOSAKA Koji;ISHIKAWA Takeo;KUBOTA Hiroshi;OHMI Tadahiro, Jun. 2006, IEEJ Transactions on Industry Applications, 126, 6, 719, 725
• Modeling and Deterioration Diagnosis of Catalyst for Automobile Exhaust Gas by On-Line Identification Method With Variable Forgetting Factor, OKADA Yasushi;OKUDA Hiroyuki;ADACHI Shuichi;NIWA Shinji;KAJITANI Mitsunobu;HASHIMOTO Seiji, Dec. 2006, IEEJ Transactions on Industry Applications, 126, 12, 1637, 1644
• Accurate Friction Compensation for a High Precision Stage using a Synchronous Piezoelectric Device Driver, MINH Truong Ngoc;OHISHI Kiyoshi;TAKATA Masasuke;HASHIMOTO Seiji;KOSAKA Kouji;KUBOTA Hiroshi;OHMI Tadahiro, Jan. 2007, IEEJ Transactions on Industry Applications, 127, 1, 44, 51
• A Fast-Response and High-Precision Control Method Based on Internal Model Control, KIGURE Masayuki;HASHIMOTO Seiji;ISHIKAWA Takeo, Sep. 2006, 2006, 114, 31, 36
• Adaptive Friction Compensation for a High Precision Stage using Synchronous Piezoelectric Device Driver, MINH Truong Ngoc;OHISHI Kiyoshi;TAKATA Masasuke;HASHIMOTO Seiji;KOSAKA Kouji;KUBOTA Hiroshi;OHMI Tadahiro, Mar. 2007, 2007, 85, 7, 12
• Comparison of the Characteristics of Different Interior Permanent Magnet Synchronous Motors, ISHIKAWA Takeo;KIMURA Toshiyuki;HASHIMOTO Seiji;MATSUNAMI Michio, Jul. 2003, 2003, 34, 7, 12
• Expectation for System Identification in Automobile Power Train Control, ADACHI Shuichi;HASHIMOTO Seiji, Mar. 2008, 47, 3, 202, 205
• Two-Step Design Method of Engine Control System Based on Generalized Predictive Control, HASHIMOTO Seiji;OKUDA Hiroyuki;OKADA Yasushi;ADACHI Shuichi;NIWA Shinji;KAJITANI Mitsunobu, Mar. 2008, IEEJ Transactions on Industry Applications, 128, 3, 251, 258
• Experimental Investigation of Vibration and Noise in a PWM Inverter-Fed Induction Motor, MORI David;AZAMI Nobuaki;ISHIKAWA Takeo;HASHIMOTO Seiji;MATUNAMI Michio, Oct. 2002, 2002, 108, 71, 76
• Development of an Electric Vehicle Using Inverter-fed Induction Motor Controlled by FPGA, ISOGAI Takuya;TERASHITA Shigeaki;CHIBA Yasunori;NARAHARA Hiroaki;MATSUNAMI Michio;HASHIMOTO Seiji;ISHIKAWA Takeo, May 2004, 2004, 35, 17, 21
• Optimal Voltage Reference Generation for Digital Control-Based Switching Power Supply, NAKA Shojiro;SATO Tomonori;SOSORHANG Ung;HASHIMOTO Seiji, Sep. 2010, 2010, 172, 13, 18
• Effect of Signal Control and Idling Stop to Reduce Exhaust Gas NOx, ISHIKAWA Takeo;SHIIYA Takashi;HASHIMOTO Seiji;MATSUNAMI Michio, Jun. 2004, 23, 21, 24
• 615 Fast Motion Control of a High Precision Stage using a Synchronous Piezoelectric Device Driver, MINH Truong Ngoc;KAMIMURA Atsushi;OHISHI Kiyoshi;TAKATA Masasuke;HASHIMOTO Seiji;KOSAKA Koji;KUBOTA Hiroshi, 2005, The Proceedings of the Dynamics & Design Conference, 2005, 0, _615, 1_-_615-6_
• Development of a Linear Actuator with Magnetic Powder Core, ISHIKAWA Takeo;MOGI Takafumi;MATSUNAMI Michio;HASHIMOTO Seiji;SAKAMOTO Masafumi;SIMSON Charles, Sep. 2008, Journal of the Japan Society of Applied Electromagnetics and Mechanics, 16, 3, 190, 195
• 2111 Vibration Suppression of Mechanical Resonant Mode Based on Discrete-Valued Input Control, Shimosakai Keisuke;Hashimoto Seiji;Nitta Mayumi;Nakajima Jun;Kosaka Kouji, 2008, 2008, 183, 184
• Instrument for Measuring the Body Mass of Astronaut, FUJII Yusaku;SHIMADA Kazuhito;MARU Koichi;YOKOTA Masayuki;HASHIMOTO Seiji;NAGAI Norihiro;SUGITA Yoichi, 2009, TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES, SPACE TECHNOLOGY JAPAN, 7, 26, Th_1, Th_6
• The Position Control Method of Precision Stage using SPIDER, Kamimura Atsushi;Hayano Toru;Ohishi Kiyoshi;Hashimoto Seiji;Kosaka Koji;Kubota Hiroshi;Ohmi Tadahiro, 2004, Proceedings of the Japan Joint Automatic Control Conference, 47, 0, 276, 276
• Experimental Analyses on L-Shape PZT Vibration Power Generator Operates in Bending-Shear Mode, Basari Amat Amir;Kumagai Shunji;Awaji Sosuke;Sakamoto Shintaro;Hashimoto Seiji;Homma Bunji;Suto Kenji;Okada Hiroaki;Okuno Hideki;Kobayashi Kojiro, 2014, Proceedings of the Japan Joint Automatic Control Conference, 57, 0, 9, 13
• Precise Vehicle Road Vibration Reproduction using Servo Drive Systems, Takahashi Yoshimune;Basari Amat Amir;Hashimoto Seiji;Sudo Kenji;Honma Bunji;Okada Hiroaki;Okuda Hideki;Kobayashi Kojiro;Kumagai Shunji, 2014, Proceedings of the Japan Joint Automatic Control Conference, 57, 0, 330, 332
• High-Speed Positioning Control Method for a Precision Stage Using a Non-Resonant Actuator (SPIDER), 上村 篤嗣;大石 潔;橋本 誠司;小坂 光二;久保田 弘;大見 忠弘, 2004, Tohoku-Section Joint Convention Record of Institutes of Electrical and Information Engineers, Japan, 2004, 0, 304, 304
• A State Estimation Method of Vehicles in EPS System Using Sliding Mode Observer, Fujimura Yu;Hashimoto Seiji;Xu Song, 2017, Proceedings of the Japan Joint Automatic Control Conference, 60, 0, 1620, 1627
• Improvement in Response of EPS Control Based on one-input two-outputs SMC, Abe Tomokazu;Hashimoto Seiji;Kajitani Mitsunobu, 2018, IEEJ Transactions on Industry Applications, 138, 4, 346, 351
• On-Line Identification Method of Static Friction for Ultra-Precision Positioning, Hashimoto Seiji;Ohishi Kiyoshi;Ishikawa Takeo;Kosaka Koji;Kubota Hiroshi;Ohmi Tadahiro, 2004, SICE Annual Conference Program and Abstracts, 2004, 0, 98, 98
• 群馬支所における最近の活動, 橋本 誠司, 2019, The Journal of The Institute of Electrical Engineers of Japan, 139, 7, 442, 442
• Identification of continuous-time state-space model using backpropagation for matrix exponential, Kawaguchi Takahiro;Hashimoto Seiji, 2020, Proceedings of the Japan Joint Automatic Control Conference, 63, 0, 123, 127
• Model Predictive Direct Torque Control of IPMSM for EV in Switch Open-circuit Fault-tolerant Mode, Yang Ting;Hashimoto Seiji;Kawaguchi Takahiro, 2020, Proceedings of the Japan Joint Automatic Control Conference, 63, 0, 1150, 1153
• High-efficient Control of an IPM Motor Based on Learning Algorithm, Honda Ryousuke;Kawaguchi Takahiro;Hashimoto Seiji;Kigure Masayuki;Shibuya Makoto, 2020, Proceedings of the Japan Joint Automatic Control Conference, 63, 0, 1146, 1149
• Mass measuring instrument for use under microgravity conditions., Fujii Yusaku;Shimada Kazuhito;Yokota Masayuki;Hashimoto Seiji;Sugita Yoichi;Ito Hitomi, The Review of scientific instruments, 79, 5

  DOI
• An Engine Control Systems Design for Low-Emission Vehicles by Generalized Predictive Control Based on Identified Model, Hashimoto, Seiji;Okuda, Hiroyuki;Okada, Yasushi;Adachi, Shuichi;Niwa, Shinji;Kajitani, Mitsunobu, 2009, ELECTRICAL ENGINEERING IN JAPAN, 169, 3, 47, 55

  DOI
• Pole-Zero Cancellation Method for Multi Input Multi Output (MIMO) Temperature Control in Heating Process System, Xu, Song;Hashimoto, Seiji;Jiang, Wei, 2019, PROCESSES, 7, 8

  DOI
• Switching Sequence Model Predictive Direct Torque Control of IPMSMs for EVs in Switch Open-Circuit Fault-Tolerant Mode, Yang, Ting;Kawaguchi, Takahiro;Hashimoto, Seiji;Jiang, Wei, 2020, ENERGIES, 13, 21

  DOI
• A Reference-Model-Based Neural Network Control Method for Multi-Input Multi-Output Temperature Control System, Liu, Yuan;Xu, Song;Hashimoto, Seiji;Kawaguchi, Takahiro, 2020, PROCESSES, 8, 11

  DOI
• A Hardware-in-the-Loop-on-Chip Development System for Teaching and Development of Dynamic Systems, Jiang, Wei;Sun, Linfeng;Chen, Yan;Ma, Haining;Hashimoto, Seiji, 2021, ELECTRONICS, 10, 7

  DOI
• Recurrent Neural Network-Based Temperature Control System Weight Pruning Based on Nonlinear Reconstruction Error, Liu, Yuan;Kawaguchi, Takahiro;Xu, Song;Hashimoto, Seiji, 2022, PROCESSES, 10, 1

  DOI
• A Real-Time Application for the Analysis of Multi-Purpose Vending Machines with Machine Learning, Cao, Yu;Ikenoya, Yudai;Kawaguchi, Takahiro;Hashimoto, Seiji;Morino, Takayuki, 2023, SENSORS, 23, 4

  DOI
• Design and Implementation of a Low-Voltage Photovoltaic System Integrated with Battery Energy Storage, He, Xiao;Hashimoto, Seiji;Jiang, Wei;Liu, Jicheng;Kawaguchi, Takahiro, 2023, ENERGIES, 16, 7

  DOI
• Path following for Autonomous Ground Vehicle Using DDPG Algorithm: A Reinforcement Learning Approach, Cao, Yu;Ni, Kan;Jiang, Xiongwen;Kuroiwa, Taiga;Zhang, Haohao;Kawaguchi, Takahiro;Hashimoto, Seiji;Jiang, Wei, 2023, APPLIED SCIENCES-BASEL, 13, 11

  DOI
• Cooperative Control of Recurrent Neural Network for PID-Based Single Phase Hotplate Temperature Control Systems, Xu, Song;Shi, Siyuan;Jiang, Wei;Hashimoto, Seiji, 2023, IEEE ACCESS, 11, 105557, 105569

  DOI
• Recent Activities at the Gunma Branch, 橋本 誠司, Mar. 2021, The Journal of The Institute of Electrical Engineers of Japan, 141, 3, 172, 172

  DOI
• Retrofit Controller Design using Finite Impulse Response Representation and Reinforcement Learning, Negishi Kohei;Kawaguchi Takahiro;Hashimoto Seiji, 2021, Proceedings of the Japan Joint Automatic Control Conference, 64, 0, 971, 974

  DOI
• A Deep Learning-based Model Applicable to Analysis of Vending Machines, Cao Yu;Ikenoya Yudai;Kawaguchi Takahiro;Hashimoto Seiji;Morino Takayuki, 2021, Proceedings of the Japan Joint Automatic Control Conference, 64, 0, 968, 970

  DOI
• A Real-Time Application for the Analysis of Multi-Purpose Vending Machines with Machine Learning., Cao Yu;Ikenoya Yudai;Kawaguchi Takahiro;Hashimoto Seiji;Morino Takayuki, Feb. 2023, Sensors (Basel, Switzerland), 23, 4

  DOI
• Path Following for Autonomous Mobile Robots with Deep Reinforcement Learning., Cao Yu;Ni Kan;Kawaguchi Takahiro;Hashimoto Seiji, Jan. 2024, Sensors (Basel, Switzerland), 24, 2

  DOI
• Enhanced Pure Pursuit Path Tracking Algorithm for Mobile Robots Optimized by NSGA-II with High-Precision GNSS Navigation., Jiang Xiongwen;Kuroiwa Taiga;Cao Yu;Sun Linfeng;Zhang Haohao;Kawaguchi Takahiro;Hashimoto Seiji, Jan. 2025, Sensors (Basel, Switzerland), 25, 3

  DOI
• Estimation of Respiratory States Based on a Measurement Model of Airflow Characteristics in Powered Air-Purifying Respirators Using Differential Pressure and Pulse Width Modulation Control Signals-In the Development of a Public-Oriented Powered Air-Purifying Respirator as an Alternative to Lockdown Measures., Fujii Yusaku;Takita Akihiro;Hashimoto Seiji;Amagai Kenji, May 2025, Sensors (Basel, Switzerland), 25, 9

  DOI
• Accuracy analysis of deep learning–driven image recognition through graph models of thermal sensing networks, Kan Ni; Xiongwen Jiang; Seiji Hashimoto; Haohao Zhang; Qiyu Ni, 31 Dec. 2025, AKCE International Journal of Graphs and Combinatorics, 1, 14, Scientific journal

  DOI
• Adaptive QSMO-Based Sensorless Drive for IPM Motor with NN-Based Transient Position Error Compensation, Linfeng Sun; Jiawei Guo; Xiongwen Jiang; Takahiro Kawaguchi; Seiji Hashimoto; Wei Jiang, Aug. 2024, Electronics, 13, 15, 1, 24, Scientific journal

  DOI
• Zero-Power Control Strategy and Dynamics Enhancement for Hybrid Maglev Conveyor Cart, Xiaowei Tang; Seiji Hashimoto; Takahiro Kawaguchi; Nobuyuki Kurita, 24 Jul. 2024, Electronics, 13, 15, 2921, 2921, Scientific journal

  DOI
• Analyses of Roll Damping Coefficients in Hypersonic Rarefied Flows, T. Ozawa; M. Shinkai; N. Kurita; S. Hashimoto, Jul. 2024, Journal of Evolving Space Activities, 2, 151, 1, 7, Scientific journal

  DOI
• Real-Time Simulation System for Small Scale Regional Integrated Energy Systems, Wei Jiang; Renjie Qi; Song Xu; Seiji Hashimoto, 29 Jun. 2024, Energies, 17, 13, 3211, 3211, Scientific journal

  DOI
• Multiport Energy Router for DC Grid Clusters, Linfeng Sun; Wei Jiang; Seiji Hashimoto; Zhengyu Lin; Takahiro Kawaguchi, Apr. 2024, IEEE Journal of Emerging and Selected Topics in Power Electronics, 12, 2, 1666, 1682, Scientific journal

  DOI
• Synthesis and Control of a Three-port LCL Resonant Wireless Power Transfer System for DC Energy Conversion Applications, Song Xu; Pengqiang Nie; Wei Jiang; Seiji Hashimoto, Mar. 2024, IEEE Transactions on Power Electronics, 1, 13, Scientific journal

  DOI
• Evaluation of Power Storage Circuit for Piezoelectric Energy Harvester in Impact Mode, Amat Amir Basari; Seiji Hashimoto, 07 Feb. 2024, Journal of Advanced Research in Applied Sciences and Engineering Technology, 39, 1, 90, 101, Scientific journal

  DOI
• Path Following for Autonomous Mobile Robots with Deep Reinforcement Learning, Yu Cao; Kan Ni; Takahiro Kawaguchi; Seiji Hashimoto, 16 Jan. 2024, Sensors, 24, 2, 561, 561, Scientific journal

  DOI
• A Novel Voltage-Current Dual-Drop Control Method for Shipboard DC Micro-Grid With Energy Storage Systems, Xun Chen; Rui Tian; Song Xu; Wei Jiang; Yonghong Wang; Seiji Hashimoto, 2024, IEEE Access, 12, 62912, 62925, Scientific journal

  DOI
• Neural Network Compensator-Based Control for Enhancing IPMSM Dynamics and Copper Loss Efficiency for Air Compressor, Jiawei Guo; Linfeng Sun; Takahiro Kawaguchi; Seiji Hashimoto, 2024, IEEE Access, 12, 62986, 62996, Scientific journal

  DOI
• Design and Analysis of a Step-Up Multi-Port Converter Applicable for Energy Conversion in Photovoltaic Battery Systems, Siyuan Shi; Song Xu; Wei Jiang; Seiji Hashimoto, 31 Dec. 2023, Energies, 17, 1, 223, 223, Scientific journal

  DOI
• A Dynamic and Parallel Two-Stage Lossless Data Compression Method for Smart Grid, Yanxia Wu; Song Xu; Caiping Xi; Pengqiang Nie; Wei Jiang; Seiji Hashimoto, Dec. 2023, IEEE Access, 11, 143475, 143485, Scientific journal

  DOI
• Online MTPA Control of IPM Motor Using NN-Based Perturb and Observe Algorithm, Linfeng Sun; Jiawei Guo; Takahiro Kawaguchi; Seiji Hashimoto; Wei Jiang, Nov. 2023, IEEE Access, 11, 122458, 122469, Scientific journal

  DOI
• Development of a Conveyor Cart with Magnetic Levitation Mechanism Based on Multi Control Strategies, Xiaowei Tang; Seiji Hashimoto; Nobuyuki Kurita; Takahiro Kawaguchi; Eiji Ogiwara; Nobuya Hishinuma; Keisuke Egura, 29 Sep. 2023, Applied Sciences, 13, 19, 10846, 10846, Scientific journal

  DOI
• Cooperative Control of Recurrent Neural Network for PID-Based Single Phase Hotplate Temperature Control Systems, Song Xu; Siyuan Shi; Wei Jiang; Seiji Hashimoto, Sep. 2023, IEEE Access, 11, 105557, 105569, Scientific journal

  DOI
• Path following for Autonomous Ground Vehicle Using DDPG Algorithm: A Reinforcement Learning Approach, Yu Cao; Kan Ni; Xiongwen Jiang; Taiga Kuroiwa; Haohao Zhang; Takahiro Kawaguchi; Seiji Hashimoto; Wei Jiang, 05 Jun. 2023, Applied Sciences, 13, 11, 6847, 6847, Scientific journal

  DOI
• Design and Implementation of a Low-Voltage Photovoltaic System Integrated with Battery Energy Storage, Xiao He; Seiji Hashimoto; Wei Jiang; Jicheng Liu; Takahiro Kawaguchi, 27 Mar. 2023, Energies, 16, 7, 3057, 3057, Scientific journal

  DOI
• A Real-Time Application for the Analysis of Multi-Purpose Vending Machines with Machine Learning, Yu Cao; Yudai Ikenoya; Takahiro Kawaguchi; Seiji Hashimoto; Takayuki Morino, 09 Feb. 2023, Sensors, 23, 4, 1935, 1935, Scientific journal

  DOI
• タグチメソッドを用いたIPMモータのトルク最適設計, 高田晃多; 石川赴夫; 橋本誠司; 鈴木伸, Feb. 2022, 30, 2
• 国際研究協力プロジェクト 低コスト個人用呼吸空気浄化デバイス開発と，フィリピン・セブ市内の病院での運用試験（第一報）, 藤井雄作; Ronald; M. Galindo; Edwin Carcasona; 田北啓洋; Ethelda Magalang; Tabetha S. Galindo; 橋本誠司; 山口誉夫; Edgar U. Tibay; Dongwei Shu; 小林春夫; 天谷賢児; 太田直哉; 吉浦紀晃; 桑名杏奈; 矢野絢子, Jan. 2022, 6, 1, 1, 9
• Recurrent Neural Network-Based Temperature Control System Weight Pruning Based on Nonlinear Reconstruction Error, Yuan Liu; Takahiro Kawaguchi; Song Xu; Seiji Hashimoto, 27 Dec. 2021, Processes, 10, 1, 44, 44, Scientific journal

  DOI
• An engineering approach for fighting COVID-19; Pseudo herd immunity through the complete spread of the helmet-type masks, Y. Fujii; A. Takita; S. Hashimoto, Apr. 2021, Journal of Mechanical and Electrical Intelligent System, 4, 1, 1, 5
• Model Predictive Torque Control of Interior Permanent Magnet Synchronous Motor powered by Three-phase Four-switch Voltage-source Inverter, Ting Yang; Seiji Hashimoto; Takahiro Kawaguchi; Wei Jiang, Apr. 2021, International Core Journal of Engineering, 7, 4, 455, 461, Scientific journal
• A Hardware-in-the-Loop-on-Chip Development System for Teaching and Development of Dynamic Systems, Wei Jiang; Linfeng Sun; Yan Chen; Haining Ma; Seiji Hashimoto, 28 Mar. 2021, Electronics, 10, 7, 801, 801, Scientific journal

  DOI
• 軽量一体型「自由外出マスク」～ロックダウン・外出自粛を不要化する「決め手」～, 藤井雄作; 田北啓洋; 橋本誠司, Mar. 2021, 5, 1, 1, 7, Scientific journal
• A Reference-Model-Based Neural Network Control Method for Multi-Input Multi-Output Temperature Control System, Yuan Liu; Song Xu; Seiji Hashimoto; Takahiro Kawaguchi, 28 Oct. 2020, Processes, 8, 11, 1365, 1365, Scientific journal

  DOI
• Switching Sequence Model Predictive Direct Torque Control of IPMSMs for EVs in Switch Open-Circuit Fault-Tolerant Mode, Ting Yang; Takahiro Kawaguchi; Seiji Hashimoto; Wei Jiang, 26 Oct. 2020, Energies, 13, 21, 5593, 5593, Scientific journal

  DOI
• Control design applicable to a helmet type full-face mask, S. Xu; Y. Cao; S. Hashimoto; Y. Fujii; A. Takita; W. Jiang, Sep. 2020, Journal of Technology and Social Science, 4, 3, 24, 30, Scientific journal
• A Helmet Type Mask “Distancing-Free Mask”: An Engineering Solution that Eliminates the Lockdown, Y. Fujii; A. Takita; S. Hashimoto, Sep. 2020, Journal of Mechanical and Electrical Intelligent System, 3, 3, 1, 7
• ウイルスをほぼ完全に遮蔽できるマスクの開発，および，ロックダウンを不要化する社会基盤の提案, 藤井雄作; 田北啓洋; 橋本誠司, Sep. 2020, Japanese Journal of Social Safety and Privacy, 4, 1, 6, 10
• Low-sampling rate data-based failure diagnosis by using self-powered system, S Okada; S Hashimoto; A A Basari, Mar. 2020, Journal of Physics: Conference Series, 1502, 012027, 012027, Scientific journal

  DOI
• Development of a PZT device-based power-generating shoes for disaster-affected areas, S Tsukagoshi; K Seto; S Hashimoto; A A Basari, Mar. 2020, Journal of Physics: Conference Series, 1502, 012028, 012028, Scientific journal

  DOI
• A Reference-Model-Based Artificial Neural Network Approach for a Temperature Control System, Song Xu; Seiji Hashimoto; YuQi Jiang; Katsutoshi Izaki; Takeshi Kihara; Ryota Ikeda; Wei Jiang, 01 Jan. 2020, Processes, 8, 1, 50, 50, Scientific journal

  DOI
• A novel multi-point temperature control method based on slow response mode, S. Hashimoto; L. Yuan; K. Yoshida; K. Izaki; T. Kihara; R. Ikeda; W. Jiang, 15 Dec. 2017, Proceedings IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, 2017-, 5623, 5627, International conference proceedings

  DOI
• A State Estimation Method of Vehicles in EPS System Using Sliding Mode Observer, Fujimura Yu; Hashimoto Seiji; Xu Song, 2017, Proceedings of the Japan Joint Automatic Control Conference, 60, 1620, 1627

  DOI
• A non-intrusive magnetic energy scavanger for renewable power generation state monitoring, Wei Jiang; Jingying Lu; Fulong Li; Seiji Hashimoto; Zhengyu Lin, 2016, 2016 IEEE INTERNATIONAL CONFERENCE ON RENEWABLE ENERGY RESEARCH AND APPLICATIONS (ICRERA), 562, 566, International conference proceedings
• Linear Quadratic Control Design in Electric Power Steering System, T. Abe; Y. Fujimura; T. Hirose; S. Hashimoto; M. Kajitani; K. Sato; K. Gonpei, 2016, 2016 INTERNATIONAL CONFERENCE ON ADVANCED MECHATRONIC SYSTEMS (ICAMECHS), 73, 78, International conference proceedings
• Multi-Mode Vibration-Based Power Generation for Automobiles, S. Hashimoto; N. Nagai; Y. Fujikura; J. Takahashi; S. Kumagai; M. Kasai; K. Suto; H. Okada, 2012, 2012 IEEE INDUSTRY APPLICATIONS SOCIETY ANNUAL MEETING (IAS), International conference proceedings
• Adaptive Identification and Control for Digital Control-Based Switching Power Supply System, S. Hashimoto; T. Sato; S. Naka; K. Motegi; W. Jiang, 2012, 2012 ASIA-PACIFIC POWER AND ENERGY ENGINEERING CONFERENCE (APPEEC), International conference proceedings
• Development of Intelligent Switching Power Supply Based on Advanced Digital Control, S. Hashimoto; S. Naka; K. Toya; U. Sosorhang, 2010, ICIEA 2010: PROCEEDINGS OF THE 5TH IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS, VOL 3, 139, 144, International conference proceedings
• Disturbance observer-based internal model control with an adaptive mechanism for linear actuators, Masayuki Kigure; Seiji Hashimoto; Takeo Ishikawa, 2007, PROCEEDINGS OF SICE ANNUAL CONFERENCE, VOLS 1-8, 1295, 1300, International conference proceedings
• High-precision control of linear actuators based on internal model control, Seiji Hashimoto; Yusaku Fujii; Masayuki Kigure; Takeo Ishikawa, 2007, ICIEA 2007: 2ND IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS, VOLS 1-4, PROCEEDINGS, 2148, 2153, International conference proceedings
• Adaptive friction compensation design for submicrometer positioning of high precision stage, Truong Ngoc Minh; Kiyoshi Ohishi; Masasuke Takata; Seiji Hashimoto; Kouji Kosaka; Hiroshi Kubota; Tadahiro Ohmi, 2007, 2007 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS, 329, +, International conference proceedings
• Variable forgetting factor-based friction compensation method of precision stages, Shigeki Goka; Seiji Hashimoto; Kiyoshi Ohishi; Takeo Ishikawa; Shuichi Adachi; Koji Kosaka; Hiroshi Kubota; Tadahiro Ohmi, 2006, 2006 SICE-ICASE INTERNATIONAL JOINT CONFERENCE, VOLS 1-13, 865, +, International conference proceedings
• Variable frequency control for spider-driven ultra-precision stages, Seiji Hashimoto; Kiyoshi Ohishi; Koji Kosaka; Takeo Ishikawa; Hiroshi Kubota; Tadahiro Ohmiy, 01 Dec. 2005, IFAC Proceedings Volumes (IFAC-PapersOnline), 16, 91, 96
• Ultra-precision stage control based on friction model of non-resonant ultrasonic motor, S Hashimoto; K Ohishi; T Ohishi; T Ishikawa; K Kosaka; Y Egashira; H Kubota; T Ohmi, 2004, 8TH IEEE INTERNATIONAL WORKSHOP ON ADVANCED MOTION CONTROL, PROCEEDINGS, 559, 564, International conference proceedings
• On-line identification method of static friction for ultra-precision positioning, S Hashimoto; K Ohishi; T Ishikawa; K Kosaka; H Kubota; T Ohmi, 2004, SICE 2004 ANNUAL CONFERENCE, VOLS 1-3, 137, 142, International conference proceedings
• 非共振型アクチュエータを用いた精密ステージの位置制御法, 上村篤嗣; 早野 徹; 大石 潔; 橋本誠司; 小坂 光二; 久保田 弘; 大見忠弘, 2004, 916, 916

  DOI
• 超精密高速ステージの開発, 遠藤 泰史; 橋口 弘幸; 古川 博之; 百島 雅人; 荒木 俊二; 江頭 義也; 小坂 光二; 岩渕 哲也; 馬場 哲郎; 奥寺 智; 小坂 哲也; 宮田 昇; 山川 孝宏; 渡邉 雅幸; 森山 司郎; 佐々木 俊一; 荒尾 淳; 井上 知行; 高木 宏司; 橋本 誠司; 大石 潔; 魚住 清彦; 中田 明良; 久保田 弘; 大見 忠弘, 2004, 302, 303
• Development of an ultra-precision stage control system using nonresonant ultrasonic motor, S Hashimoto; K Ohishi; T Ohishi; T Ishikawa; K Kosaka; Y Egashira; H Kubota; T Ohmi, 2003, IECON'03: THE 29TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, VOLS 1 - 3, PROCEEDINGS, 1331, 1336, International conference proceedings
• Derivation of modal parameters of a flexible structure based on multi-decimation identification method, Seiji Hashimoto; Takeo Ishikawa; Shuichi Adachi; Hirohito Funato, 2002, IEEE International Symposium on Industrial Electronics, 2, 436, 440, International conference proceedings

  DOI
• Robust control design based on identified model for autonomous flight system of an unmanned helicopter, Seiji Hashimoto; Shuichi Adachi; Yasunobu Segawa; Gou Miyamori; Anzhong Tan, 2001, IECON Proceedings (Industrial Electronics Conference), 3, 323, 328, International conference proceedings
• Design of robust controllers with constraints on the control signal application for brushless DC drives, A Forrai; S Hashimoto; H Funato; K Kamiyama, 2001, IECON'01: 27TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, VOLS 1-3, 603, 608, International conference proceedings
• System identification experiments on a large-scale unmanned helicopter for autonomous flight, Seiji Hashimoto; Tomonori Ogawa; Shuichi Adachi; Anzhong Tan; Gou Miyamori, 2000, IEEE Conference on Control Applications - Proceedings, 1, 850, 855, International conference proceedings
• Active vibration suppression control of flexible structures by scheduled H-infinity control considering the control force saturation, S Hashimoto; T Yamanaka; A Forrai; H Funato; K Kamiyama, 2000, IAS 2000 - CONFERENCE RECORD OF THE 2000 IEEE INDUSTRY APPLICATIONS CONFERENCE, VOLS 1-5, 1159, 1162, International conference proceedings
• Fuzzy logic eased vibration suppression control of flexible structures, A Forrai; S Hashimoto; H Funato; K Kamiyama, 2000, 6TH INTERNATIONAL WORKSHOP ON ADVANCED MOTION CONTROL, PROCEEDINGS, 378, 383, International conference proceedings
• Robust vibration suppression control using system identification of minor control-loop system, Seiji Hashimoto; Kenji Hara; Hirohito Funato; Kenzo Kamiyama, 1997, Proceedings of the Power Conversion Conference - Nagaoka, PCC, 2, 607, 612, International conference proceedings
• Robust comparison between state feedback-based speed control systems with and without state observers in resonant motor drives, Kenji Hara; Seiji Hashimoto; Hirohito Funato; Kenzo Kamiyama, 1997, Proceedings of the International Conference on Power Electronics and Drive Systems, 1, 371, 376, International conference proceedings
• Improvement of robust stability in two-degree-of-freedom control with adaptive control, K Yamamoto; S Hashimoto; H Funato; K Kamiyama, 1997, IECON '97 - PROCEEDINGS OF THE 23RD INTERNATIONAL CONFERENCE ON INDUSTRIAL ELECTRONICS, CONTROL, AND INSTRUMENTATION, VOLS. 1-4, 300, 305, International conference proceedings
• Control and Management of a Multiport DC–DC Converter With Wireless Power Link Applicable for PV-Battery Systems, Pengqiang Nie; Song Xu; Wei Jiang; Seiji Hashimoto, Jun. 2026, IEEE Transactions on Power Electronics, 41, 6, 10440, 10453, Scientific journal

  DOI
• Output Feedback Adaptive Tracking Control for Uncertain Strict-Feedback Nonlinear Systems with Full-State Constraints and Unknown Output Gain, Zhenlin Wang; Seiji Hashimoto; Pengqiang Nie; Song Xu; Takahiro Kawaguchi, 13 May 2026, Sensors, 26, 10, 3084, 3084, Scientific journal

  DOI
• Co-Design Method for Energy Management Systems in Vehicle–Grid-Integrated Microgrids from HIL Simulation to Embedded Deployment, Yan Chen; Takahiro Kawaguchi; Seiji Hashimoto, 22 Apr. 2026, Electronics, 15, 9, 1786, 1786, Scientific journal

  DOI
• Operation Prediction of a Gasification-Based Waste Treatment Plant Using Deep Learning, Shunsuke Arai; Kentaro Mitsuma; Takahiro Kawaguchi; Keiichi Kaneko; Seiji Hashimoto, 01 Apr. 2026, Modelling, 7, 2, 70, 70, Scientific journal

  DOI
• Dual-Layer Multi-Port High-Gain DC-DC Power Converter with Hybrid Voltage/Current Distribution Strategy, Lijuan Wang; Feng Zhou; Pengqiang Nie; Seiji Hashimoto; Takahiro Kawaguchi, 31 Mar. 2026, Electronics, 15, 7, 1454, 1454, Scientific journal

  DOI
• A Multi-Port Wireless Energy Interaction System Based on LC Series Resonance with Seamless Mode Switching Capability, Xun Chen; Yujie Wang; Song Xu; Pengqiang Nie; Wei Jiang; Seiji Hashimoto, 05 Mar. 2026, Symmetry, 18, 3, 447, 447, Scientific journal

  DOI
• An Intelligent Multi-Port Temperature Control Scheme with Open-Circuit Fault Diagnosis for Aluminum Heating Systems, Song Xu; Yiqi Rui; Lijuan Wang; Pengqiang Nie; Wei Jiang; Linfeng Sun; Seiji Hashimoto, 20 Jan. 2026, Processes, 14, 2, 362, 362, Scientific journal

  DOI
• A Comprehensive Review of Magnetic Coupling Mechanisms, Compensation Networks, and Control Strategies for Electric Vehicle Wireless Power Transfer Systems, Yanxia Wu; Pengqiang Nie; Zhenlin Wang; Lijuan Wang; Seiji Hashimoto; Takahiro Kawaguchi, 14 Jan. 2026, Processes, 14, 2, 287, 287, Scientific journal

  DOI
• Random forest-based speed forecasting and carbon capture optimization for shipboard integrated energy systems, Song Xu; Zikun Zhou; Linfeng Sun; Pengqiang Nie; Seiji Hashimoto; Wei Jiang, Jan. 2026, Energy Conversion and Management: X, 29, 101467, 101467, Scientific journal

  DOI
• Soft-Switching, Duty-Cycle-Extended Two-Phase Interleaved Buck with Positive Inductor Coupling for High-Density Consumer Electronics Power Supplies, Zhengyang Zhang; Song Xu; Seiji Hashimoto; Wei Jiang, 10 Dec. 2025, Symmetry, 17, 12, 2126, 2126, Scientific journal

  DOI
• Prescribed Performance Adaptive Fault-Tolerant Control for Nonlinear System with Actuator Faults and Dead Zones, Zhenlin Wang; Seiji Hashimoto; Nobuyuki Kurita; Pengqiang Nie; Song Xu; Takahiro Kawaguchi, 08 Nov. 2025, Symmetry, 17, 11, 1915, 1915, Scientific journal

  DOI
• A Discrete Space Vector Modulation MPC-Based Artificial Neural Network Controller for PMSM Drives, Jiawei Guo; Takahiro Kawaguchi; Seiji Hashimoto, 30 Oct. 2025, Machines, 13, 11, 996, 996, Scientific journal

  DOI
• Detection and Classification of Low-Voltage Series Arc Faults Based on RF-Adaboost-SHAP, Lichun Qi; Takahiro Kawaguchi; Seiji Hashimoto, 23 Sep. 2025, Electronics, 14, 19, 3761, 3761, Scientific journal

  DOI
• A Non-Isolated High Gain Step-Up DC/DC Converter Based on Coupled Inductor with Reduced Voltage Stresses, Yuqing Yang; Song Xu; Wei Jiang; Seiji Hashimoto, 22 Aug. 2025, Journal of Low Power Electronics and Applications, 15, 3, 48, 48, Scientific journal

  DOI
• The Voltage Regulation of Boost Converters via a Hybrid DQN-PI Control Strategy Under Large-Signal Disturbances, Pengqiang Nie; Yanxia Wu; Zhenlin Wang; Song Xu; Seiji Hashimoto; Takahiro Kawaguchi, 12 Jul. 2025, Processes, 13, 7, 2229, 2229, Scientific journal

  DOI
• A Coordinated Communication and Power Management Strategy for DC Converters in Renewable Energy Systems, Feng Zhou; Takahiro Kawaguchi; Seiji Hashimoto; Wei Jiang, 25 Jun. 2025, Energies, 18, 13, 3329, 3329, Scientific journal

  DOI
• Series Arc Fault Detection Based on Improved Artificial Hummingbird Algorithm Optimizer Optimized XGBoost, Lichun Qi; Takahiro Kawaguchi; Seiji Hashimoto, 18 Jun. 2025, Applied Sciences, 15, 12, 6861, 6861, Scientific journal

  DOI
• Estimation of Respiratory States Based on a Measurement Model of Airflow Characteristics in Powered Air-Purifying Respirators Using Differential Pressure and Pulse Width Modulation Control Signals—In the Development of a Public-Oriented Powered Air-Purifying Respirator as an Alternative to Lockdown Measures, Yusaku Fujii; Akihiro Takita; Seiji Hashimoto; Kenji Amagai, 07 May 2025, Sensors, 25, 9, 2939, 2939, Scientific journal

  DOI
• Enhanced Pure Pursuit Path Tracking Algorithm for Mobile Robots Optimized by NSGA-II with High-Precision GNSS Navigation, Xiongwen Jiang; Taiga Kuroiwa; Yu Cao; Linfeng Sun; Haohao Zhang; Takahiro Kawaguchi; Seiji Hashimoto, 26 Jan. 2025, Sensors, 25, 3, 745, 745, Scientific journal

  DOI
• An Enhanced Time Delay Smith Predictor of Sliding Mode Structural Vibration Controller Based on Extended State Observer, Juan Zhai; Shengquan Li; Bohan Li; Takahiro Kawaguchi; Seiji Hashimoto, 22 Jan. 2025, International Journal of Structural Stability and Dynamics, 26, 15, Scientific journal

  DOI
• Design and Implementation of a Wireless Power Transfer System Using LCL Coupling Network with Inherent Constant-Current and Constant-Voltage Output for Battery Charging, Pengqiang Nie; Song Xu; Zhenlin Wang; Seiji Hashimoto; Linfeng Sun; Takahiro Kawaguchi, 14 Jan. 2025, Energies, 18, 2, 341, 341, Scientific journal

  DOI
• A Series Arc Fault Diagnosis Method Based on an Extreme Learning Machine Model, Lichun Qi; Takahiro Kawaguchi; Seiji Hashimoto, 23 Dec. 2024, Processes, 12, 12, 2947, 2947, Scientific journal

  DOI
• A Study on Cyclical Learning Rates in Reinforcement Learning and Its Application to Temperature and Power Consumption Control of Refrigeration System, Jingchen Wang; Kazuhiro Motegi; Yoichi Shiraishi; Seiji Hashimoto, 02 Dec. 2024, Energies, 17, 23, 6054, 6054, Scientific journal

  DOI
• Multi-Terminal DC Transformer for Renewable Energy Cluster Grid Connection, Feng Zhou; Takahiro Kawaguchi; Seiji Hashimoto, 16 Oct. 2024, Energies, 17, 20, 5152, 5152, Scientific journal

  DOI
• Intelligent Identification Method of Low Voltage AC Series Arc Fault Based on Using Residual Model and Rime Optimization Algorithm, Xiao He; Takahiro Kawaguchi; Seiji Hashimoto, 20 Sep. 2024, Energies, 17, 18, 4675, 4675, Scientific journal

  DOI

MISC

• Improvement in response of EPS control based on one-input two-outputs SMC, Tomokazu Abe; Seiji Hashimoto; Mitsunobu Kajitani, 2018, IEEJ Transactions on Industry Applications, 138, 4, 346, 351

  DOI
• DC Micro-Grid Contactless Power Supply System with Active Load Detecting Control Method, Song Xu; Seiji Hashimoto; Wei Jiang, 2018, 2, 2, 36, 44
• DC Micro-Grid Contactless Power Supply System with Active Load Detecting Control Method, Song Xu; Seiji Hashimoto; Wei Jiang, 2018, Journal of Technology and Social Science, 2, 2, 36, 44
• Electric Power Steering System Design Based on Linear Quadratic Control, T. Abe; Y. Fujimura; T. Hirose; S. Hashimoto; M. Kajitani; K. Sato; K. Gonpei, 2017, 1, 2, 37, 46
• An Observer Design Strategy in Electric Power Steering System, Jingying Lu; Wei Jiang; Tomokazu Abe; Yu Fujimura; Seiji Hashimoto; Mitsunobu Kajitani, 2017, 1, 2, 47, 53
• High Power Output of L-shape PZT Power Generator Working in Bending-Shear Mode, A. A. Basari; S. Hashimoto, 2017, 9, 1, 41, 45
• Electric Power Steering System Design Based on Linear Quadratic Control, T. Abe; Y. Fujimura; T. Hirose; S. Hashimoto; M. Kajitani; K. Sato; K. Gonpei, 2017, Journal of Technology and Social Science, 1, 2, 37, 46
• An Observer Design Strategy in Electric Power Steering System, Jingying Lu; Wei Jiang; Tomokazu Abe; Yu Fujimura; Seiji Hashimoto; Mitsunobu Kajitani, 2017, Journal of Technology and Social Science, 1, 2, 47, 53
• High Power Output of L-shape PZT Power Generator Working in Bending-Shear Mode, A. A. Basari; S. Hashimoto, 2017, Journal of Telecommunication, Electronic and Computer Engineering, 9, 1, 41, 45
• Design and optimization of a wideband impact mode piezoelectric power generator, A. A. Basari; S. Hashimoto; B. Homma; H. Okada; H. Okuno; S. Kumagai, May 2016, CERAMICS INTERNATIONAL, 42, 6, 6962, 6968

  DOI
• Study of the effect of mechanical impact parameters on an impact-mode piezoelectric ceramic power generator, Arnat Arnir Basari; Sosuke Awaji; Shintaro Sakamoto; Seiji Hashimoto; Bunji Homma; Kenji Suto; Hiroaki Okada; Hideki Okuno; Kojiro Kobayashi; Shunji Kumagai, Nov. 2015, CERAMICS INTERNATIONAL, 41, 9, 12038, 12044

  DOI
• The Effect of the Parameters of a Vibration-Based Impact Mode Piezoelectric Power Generator, Amat A. Basari; S. Awaji; S. Sakamoto; S. Hashimoto; B. Homma; K. Suto; H. Okada; H. Okuno; K. Kobayashi; S. Kumagai, 2015, SHOCK AND VIBRATION, 345191

  DOI
• Shape Effect of Piezoelectric Energy Harvester on Vibration Power Generation, A. A. Basari; S. Awaji; S. Wang; S. Hashimoto; S. Kumagai; K. Suto; H. Okada; H. Okuno; B. Homma; W. Jiang; S. Wang, 2014, 2, 9, 117, 124
• A Simple Equivalent Circuit for Efficiency Calculation of Brushless DC Motors, Ishikawa, Takeo; Tsuji, Takuma; Hashimoto, Seiji; Kurita, Nobuyuki, 2014, 3, 1, 54, 60

  DOI
• Shape Effect of Piezoelectric Energy Harvester on Vibration Power Generation, A. A. Basari; S. Awaji; S. Wang; S. Hashimoto; S. Kumagai; K. Suto; H. Okada; H. Okuno; B. Homma; W. Jiang; S. Wang, 2014, Journal of Power and Energy Engineering, 2, 9, 117, 124
• A Simple Equivalent Circuit for Efficiency Calculation of Brushless DC Motors, Ishikawa, Takeo; Tsuji, Takuma; Hashimoto, Seiji; Kurita, Nobuyuki, 2014, Journal of international Conference on Electrical Machines and Systems, 3, 1, 54, 60

  DOI
• A Multi-Mode Vibration-Based Power Generator for Vehicles, Seiji Hashimoto; Nobuyuki Nagai; Yoshimitsu Fujikura; Jyunpei Takahashi; Shunji Kumagai; Makoto Kasai; Kenji Suto; Hiroaki Okada, 2013, NEW TRENDS IN MECHANICAL ENGINEERING AND MATERIALS, 251, 124, +

  DOI
• Multi-Axis Vibration Power Generation Device for Automobiles, Shunji Kumagai; Kenji Suto; Hiroaki Okada; Makoto Kasai; Seiji Hashimoto; Nobuyuki Nagai; Yoshimitsu Fujikura; Junpei Takahashi, 2013, NEW TRENDS IN MECHANICAL ENGINEERING AND MATERIALS, 251, 119, +

  DOI
• Effective energy regeneration from multi-mode-based vehicle vibration, Seiji Hashimoto; Nobuyuki Nagai; Shunji Kumagai; Makoto Kasai, 2013, International Journal of Advanced Mechatronic Systems, 5, 4, 279, 287

  DOI
• Output characteristics of multi-axis vibration power generation device for automobiles, Shunji Kumagai; Makoto Kasai; Seiji Hashimoto; Nobuyuki Nagai, 2013, International Journal of Advanced Mechatronic Systems, 5, 2, 105, 112

  DOI
• A high precision control based on learning algorithm with reference model and disturbance observer, Seiji Hashimoto; Hiroyuki Saitou; Kenji Nakajima, Jun. 2012, Advanced Science Letters, 13, 463, 467

  DOI
• Generation of optimal voltage reference for digital control-based switching power supply, S. Hashimoto; S. Naka; U. Sosorhang; N. Honjo, 2011, Asia-Pacific Power and Energy Engineering Conference, APPEEC, JEPE11042201

  DOI
• Reproduction of vehicle vibration by acceleration-based multi-axis control, Nobuyuki Nagai; Seiji Hashimoto; Yoshimitsu Fujikura; Jyunpei Takahashi; Shunji Kumagai; Makoto Kasai; Kenji Suto; Hiroaki Okada, 2013, Applied Mechanics and Materials, 251, 129, 133

  DOI
• A High Precision Positioning Control Method Based on Learning Algorithm with Reference Model, Kenji Nakajima; Hiroyuki Saitou; Seiji Hashimoto, 2011, MECHATRONICS AND INTELLIGENT MATERIALS, PTS 1 AND 2, 211-212, 671, 675

  DOI
• Estimation of Physical Parameters using Learning Algorithm in Precision Positioning Control, Seiji Hashimoto; Hiroki Watanabe; Kenji Nakajima, 2011, MECHATRONICS AND INTELLIGENT MATERIALS, PTS 1 AND 2, 211-212, 469, 473

  DOI
• An Engine Control Systems Design for Low-Emission Vehicles by Generalized Predictive Control Based on Identified Model, Seiji Hashimoto; Hiroyuki Okuda; Yasushi Okada; Shuichi Adachi; Shinji Niwa; Mitsunobu Kajitani, Nov. 2009, ELECTRICAL ENGINEERING IN JAPAN, 169, 3, 47, 55

  DOI
• Instrument for Measuring the Body Mass of Astronaut, FUJII Yusaku; SHIMADA Kazuhito; MARU Koichi; YOKOTA Masayuki; HASHIMOTO Seiji; NAGAI Norihiro; SUGITA Yoichi, 2009, TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES, AEROSPACE TECHNOLOGY JAPAN, 7, 26, Th1-Th6, Th_6

  DOI
• Instrument for Measuring the Body Mass of Astronaut, Y. Fujii; K. Shimada; K. Maru; M. Yokota; S. Hashimoto; N. Nagai; Y. Sugita, 2009, Jpn. Soc. Aeronaut. Space Sci., 7, 26, Th1-Th6, Th_6

  DOI
• Mass measuring instrument for use under microgravity conditions, Yusaku Fujii; Kazuhito Shimada; Masayuki Yokota; Seiji Hashimoto; Yoichi Sugita; Hitomi Ito, May 2008, REVIEW OF SCIENTIFIC INSTRUMENTS, 79, 5

  DOI
• Two-step design method of engine control system based on generalized predictive control, Seiji Hashimoto; Hiroyuki Okuda; Yasushi Okada; Shuichi Adachi; Shinji Niwa; Mitsunobu Kajitani, 2008, IEEJ Transactions on Industry Applications, 128, 3, 12, 258

  DOI
• 自動車パワートレイン制御におけるシステム同定への期待, 足立,橋本, 2008, 47, 3
• Material Tester Using a Controlled Oscillator and an Inertial Mass, S. Hashimoto; Y. Fujii, 2008, 381-382, 457, 460
• Development of a Linear Actuator with Magnetic Powder Core(16th MAGDA Conference, Part II), ISHIKAWA Takeo; MOGI Takafumi; MATSUNAMI Michio; HASHIMOTO Seiji; SAKAMOTO Masafumi; SIMSON Charles; Takeo ISHIKAWA; Takafumi MOGI; Michio MATSUNAMI; Seiji HASHIMOTO; Masafumi SAKAMOTO; Charles SIMSON, 2008, Journal of the Japan Society of Applied Electromagnetics and Mechanics, 16, 3, 190, 195
• Material Tester Using a Controlled Oscillator and an Inertial Mass, S. Hashimoto; Y. Fujii, 2008, Journal of Key Engineering Materials, 381-382, 457, 460
• Accurate Friction Compensation for a High Precision Stage using a Synchronous Piezoelectric Device Driver, MINH Truong Ngoc; OHISHI Kiyoshi; TAKATA Masasuke; HASHIMOTO Seiji; KOSAKA Kouji; KUBOTA Hiroshi; OHMI Tadahiro, 2007, IEEJ Transactions on Sensors and Micromachines, 127-D, 1, 44, 51

  DOI
• Accurate Friction Compensation for a High Precision Stage using a Synchronous Piezoelectric Device Driver, T. N. Minh; K. Ohishi; M. Takada; S. Hashimoto; K. Kosaka; H. Kubota; T.Ohmi, 2007, IEEJ Trans. IA, 127-D, 1, 44, 51

  DOI
• Wear reduction method for frictionally fast feeding piezoactuator, K Kosaka; T Iwabuchi; T Baba; T Endo; H Hashiguchi; H Furukawa; Y Egashira; S Hashimoto; M Touge; K Uozumi; A Nakada; H Kubota; T Ohmi, Feb. 2006, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 45, 2A, 1005, 1011

  DOI
• A Friction Compensation Method in Positioning Control of Nonresonant Ultrasonic Actuator-Driven Precise Stage, HASHIMOTO Seiji; OHISHI Kiyoshi; KOSAKA Koji; ISHIKAWA Takeo; KUBOTA Hiroshi; OHMI Tadahiro, 2006, IEEJ Transactions on Industry Applications, Vol. 126-D, No. 6, pp. 719-725, 6, 719, 725

  DOI
• Continuous path tracking system of high precision stage using synchronous piezoelectric device driver, T. N. Minh; K. Ohishi; M. Takata; S. Hashimoto; K. Kosaka; H. Kubota; T. Ohmi, 2006, AICAM 2005, 11-12, 121, +
• Modeling and Deterioration Diagnosis of Catalyst for Automobile Exhaust Gas by On-Line Identification Method With Variable Forgetting Factor, OKADA Yasushi; OKUDA Hiroyuki; ADACHI Shuichi; NIWA Shinji; KAJITANI Mitsunobu; HASHIMOTO Seiji, 2006, IEEJ Transactions on Industry Applications, 126-D, 12, 1637, 1644

  DOI
• Analysis of a PM Motor Drive System by a Coupled Method with MATLAB and FEM, ISHIKAWA TAKEO; T. Sunaga; S. Nakamura; D. Mori; HASHIMOTO SEIJI; M. Matsunami, 2005, Vol. 5-B, No. 3, pp. 229-232
• A Control Method of Ultrasonic Actuator-Driven Precision Stages Based on Stick-Slip Compensation and Continuous-Path Tracking, Seiji Hashimoto; Takeo Ishikawa; Kiyoshi Ohishi; Koji Kosaka; Hiroshi Kubota; Tadahiro Ohmi, 01 Sep. 2005, IEEJ Transactions on Industry Applications, 125, 6, 582, 589

  DOI
• Analysis of a PM Motor Drive System by a Coupled Method with MATLAB and FEM, ISHIKAWA TAKEO; T. Sunaga; S. Nakamura; D. Mori; HASHIMOTO SEIJI; M. Matsunami, 2005, KIEE International Transactions on Electrical Machinery and Energy Conversion Systems, Vol. 5-B, No. 3, pp. 229-232
• Optimal design of thrust characteristics of permanent magnet type linear motor using orthogonal table and multiregression analysis, T Ishikawa; C Chen; S Hashimoto; M Matsunami, Mar. 2004, IEEE TRANSACTIONS ON MAGNETICS, 40, 2, 1220, 1223

  DOI
• Multi-Decimation Identification-Based Modeling Method of Flexible Structures for Robust Vibration Control, Seiji Hashimoto; Takeo Ishikawa; Hirohito Funato; Akihiro Isojima, 01 Sep. 2004, IEEJ Transactions on Industry Applications, 124, 5, 471, 478

  DOI
• Analysis of an AC Servo System by the Method Coupling MATLAB/Simulink with Finite Element Method, Takeo Ishikawa; David Mori; Seiji Hashimoto; Michio Matsunami, 01 Sep. 2004, IEEJ Transactions on Industry Applications, 124, 12, 1283, 1284

  DOI
• Robust active vibration suppression control with constraint on the control signal: application to flexible structures, A Forrai; S Hashimoto; H Funato; K Kamiyama, Sep. 2003, EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS, 32, 11, 1655, 1676

  DOI
• Robust-Controller design with hard constraint on the control signal - application for active vibration suppression of flexible structure, A Forrai; S Hashimoto; H Funato; K Kamiyama, Oct. 2002, ARCHIVE OF APPLIED MECHANICS, 72, 6-7, 379, 394

  DOI
• Gray box identification of flexible structures: application to robust active vibration suppression control, A Forrai; S Hashimoto; A Isojima; H Funato; K Kamiyama, Aug. 2001, EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS, 30, 8, 1203, 1220

  DOI
• AR-based identification and control approach in vibration suppression, S Hashimoto; K Hara; H Funato; K Kamiyama, May 2001, IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 37, 3, 806, 811

  DOI
• Structural control technology - System identification and control of flexible structures, A Forrai; S Hashimoto; H Funato; K Kamiyama, Dec. 2001, COMPUTING & CONTROL ENGINEERING JOURNAL, 12, 6, 257, 262
• Autonomous Flight Control for a Large-Scale Unmanned Helicopter-System Identification and Robust Control Systems Design, Shuichi Adachi; Seiji Hashimoto; Gou Miyamori; Anzhong Tan, 2001, IEEJ Transactions on Industry Applications, 121, 12, 1278, 1283

  DOI
• Robust controller design with hard constraints on the control signal, A Forrai; T Tanoi; S Hashimoto; H Funato; K Kamiyama, Aug. 2001, ELECTRICAL ENGINEERING, 83, 4, 179, 186

  DOI
• Autonomous Flight Control for a Large-Scale Unmanned Helicopter, 足立 修一; 橋本 誠司; 宮森 剛; Anzhong Tan, 2001, The Trans. of The IEE of Japan, Vol. 121-D, No. 12, pp. 1278-1
• System Identification of Induction Motors for Auto Tuning -Design Method to Torque Control Systems using Identified Model-, HASHIMOTO Seiji; FUNATO Hirohito; IMANARI Yutaka; KAMIYAMA Kenzo, 2000, IEEJ Transactions on Sensors and Micromachines, Vol. 120-D,No. 10,pp. 1241-124, 10, 1241, 1242

  DOI
• 部分状態フィードバック補償による軸ねじり振動抑制制御, 原 賢志; 船渡 寛人; 橋本 誠司; 神山 健三, 1999, Vol. 119-D,No. 2,pp. 182-188

  DOI
• Vibration Suppression Control using Two Variable Parameters in a Multi-Mass System, FUNATO Hirohito; YAMAMOTO Kiyohito; HARA Kenji; HASHIMOTO Seiji; KAMIYAMA Kenzo, 1999, IEEJ Transactions on Sensors and Micromachines, Vol. 119-D, No. 8/9, 8, 1121, 1127

  DOI
• DVFC-Based Identification and its Application to Robust Vibration Suppression Control of Flexible Structures, Seiji Hashimoto; Hirohito Funato; Kenji Hara; Kenzo Kamiyama, 1999, IEEJ Transactions on Industry Applications, 119, 6, 888, 894

  DOI
• Vibration Suppression Control Using Two Variable Parameters in a Two-Mass Plant, Seiji Hashimoto; Hirohito Funato; Kenji Hara; Kenzo Kamiyama; Kazuteru Izumi, 1998, IEEJ Transactions on Industry Applications, 118, 10, 1172, 1176

  DOI
• Vibration Suppression Control Using Two Variable Parameters in a Multi-Mass Plant, Hirohito Funato; Kiyohito Yamamoto; Seiji Hashimoto; Kenzou Kamiyama, 1998, IEEJ Transactions on Industry Applications, 118, 11, 1334, 1335

  DOI
• A First-Order H∞Controller for Robust Vibration Suppression Control in Speed Control Systems considering Explicit Uncertainty, Seiji Hashimoto; Hirohito Funato; Kiyohito Yamamoto; Kenji Hara; Kenzo Kamiyama, 01 Sep. 1998, IEEJ Transactions on Industry Applications, 118, 5, 645, 651

  DOI
• Lower-order H∞ Controller for Speed Control of Two Mass System, Seiji Hashimoto; Kenzo Kamiyama, 1995, IEEJ Transactions on Industry Applications, 115, 8, 1070, 1071

  DOI
• 部分状態フィードバック制御による共振負荷を持つサーボ系の設計法, 原 賢志; 橋本 誠司; 船渡 寛人; 神山 健三, 1997, Vol. 117-D,No. 9,pp. 1172-1173

  DOI
• LQ制御に基づく電動パワーステアリングシステムの構築, 藤村悠; 広瀬達也; 阿部己和; 橋本誠司; 梶谷満信; 佐藤健; 権瓶和彦, 2016, 2016
• インピーダンス制御によるEPSシミュレータの開発, 広瀬達也; 金田登志樹; 橋本誠司; 梶谷満信; 畑岸幸浩; 阿部己和; 佐藤健; 西村雅之, 2015, 2015
• EPS制御系開発に向けたHILシミュレータの開発, 広瀬達也; 橋本誠司; 梶谷満信; 阿部己和; 佐藤健; 権瓶和彦, 2015, CT-15, 155-161
• 2111 Vibration Suppression of Mechanical Resonant Mode Based on Discrete-Valued Input Control, Shimosakai Keisuke; Hashimoto Seiji; Nitta Mayumi; Nakajima Jun; Kosaka Kouji, 2008, 2008, 183, 184
• Adaptive Friction Compensation for a High Precision Stage using Synchronous Piezoelectric Device Driver, MINH Truong Ngoc; OHISHI Kiyoshi; TAKATA Masasuke; HASHIMOTO Seiji; KOSAKA Kouji; KUBOTA Hiroshi; OHMI Tadahiro, 07 Mar. 2007, 2007, 85, 7, 12
• A Fast-Response and High-Precision Control Method Based on Internal Model Control, KIGURE Masayuki; HASHIMOTO Seiji; ISHIKAWA Takeo, 07 Sep. 2006, 2006, 114, 31, 36
• Analysis of Radial Force and Vibration of an Induction Motor Fed by PWM Inverter, ISHIKAWA Takeo; ISOGAI Takuya; HASHIMOTO Seiji; MATSUNAMI Michio, 02 Dec. 2005, 2005, 171, 49, 54
• Adaptive Observer Based-Static Friction Compensation of Ultraprecision Stages for Next-Generation Semiconductor Exposure Equipment, KUROKAWA Takayuki; HASHIMOTO Seiji; OHISHI Kiyoshi; KOSAKA Koji; ISHIKAWA Takeo; KUBOTA Hiroshi; OHMI Tadahiro, 28 Oct. 2005, 2005, 116, 45, 50
• 615 Fast Motion Control of a High Precision Stage using a Synchronous Piezoelectric Device Driver, MINH Truong Ngoc; KAMIMURA Atsushi; OHISHI Kiyoshi; TAKATA Masasuke; HASHIMOTO Seiji; KOSAKA Koji; KUBOTA Hiroshi, 22 Aug. 2005, Dynamics & Design Conference, 2005, "615, 1"-"615-6"
• 非共振型超音波アクチュエータを用いた精密ステージの連続軌跡追従制御系の構成法, 上村篤嗣; 大石 潔; 高田雅介; 橋本誠司; 小坂光二; 久保田 弘; 大見忠弘, 2005, 73, 78
• Experimental Friction Compensation Method for SPIDER-Driven Precision Stage Control, OHISHI Takuya; HASHIMOTO Seiji; ISHIKAWA Takeo; OHISHI Kiyoshi; KOSAKA Kouji; KUBOTA Hiroshi; OHMI Tadahiro, 2005, 2005, 40, 79, 84
• Effect of Signal Control and Idling Stop to Reduce Exhaust Gas NOx, ISHIKAWA Takeo; SHIIYA Takashi; HASHIMOTO Seiji; MATSUNAMI Michio, 16 Jun. 2004, 23, 21, 24
• Development of an Electric Vehicle Using Inverter-fed Induction Motor Controlled by FPGA, ISOGAI Takuya; TERASHITA Shigeaki; CHIBA Yasunori; NARAHARA Hiroaki; MATSUNAMI Michio; HASHIMOTO Seiji; ISHIKAWA Takeo, 27 May 2004, 2004, 35, 17, 21
• A Friction Model-Based Control of Precision Stages Driven by Non-Resonant Ultrasonic Motor, HASHIMOTO Seiji; OHISHI Kiyoshi; KOSAKA Koji; OHISHI Takuya; ISHIKAWA Takeo; KUBOTA Hiroshi; OHMI Tadahiro, 11 Mar. 2004, 2004, 24, 1, 6
• Comparison of the Characteristics of Different Interior Permanent Magnet Synchronous Motors, ISHIKAWA Takeo; KIMURA Toshiyuki; HASHIMOTO Seiji; MATSUNAMI Michio, 10 Jul. 2003, 2003, 34, 7, 12
• Experimental Investigation of Vibration and Noise in a PWM Inverter-Fed Induction Motor, MORI David; AZAMI Nobuaki; ISHIKAWA Takeo; HASHIMOTO Seiji; MATUNAMI Michio, 17 Oct. 2002, 2002, 108, 71, 76
• Construction of navigation and control systems of a large-scale unmanned helicopter based on identified model, Hashimoto, Seiji; Adachi, Shuichi; Segawa, Yasunobu; Tan, Anzhong; Miyamori, Gou; Akasaka, Takeshi, 2002, 15, 1
• 制御入力飽和を考慮したロバスト飛行制御系設計法, 小谷浩之; 橋本誠司; 足立修一; 宮森剛; 赤坂剛史; 田辺安忠, 2002, 2002, 3
• センサフュージョンによる飛行状態推定システムの構築, 橋本誠司; 久保井宏暁; 足立修一; 宮森剛; 赤坂剛史; 田辺安忠, 2002, 2002, 3
• Construction of Navigation and Control Systems of Large-Scale Unmanned Helicopter for Autonomous Flight., 瀬川泰伸; 足立修一; 橋本誠司; 田辺安忠; 宮森剛; 赤坂剛史, 2002, 日本機械学会関東支部総会講演会講演論文集, 8th
• 103 Robust Control Experiments on Large-Scale Unmanned Helicopter for Autonomous Flight, Segawa Y.; Adachi S.; Hashimoto S.; Tan Anzhong; Miyamori G., 20 Apr. 2001, Dynamics and Design Conference, 2001, 7, 11, 14
• Controler Design of Large-Scale Unmanned Helicopter., 宮森剛; 赤坂剛史; 中村優; 橋本誠司; 足立修一; 瀬川泰伸, 2001, 飛行機シンポジウム講演集, 39th, 454p-889p
• 337 A Modeling Method of Flexible Structures for Robust Vibration Control : Multi-Decimation Identification Approach, HASHIMOTO Seiji; ISOJIMA Akihiro; ADACHI Shuichi; FUNATO Hirohito; KAMIYAMA Kenzo, 2001, MoViC, 2001, 0, 475, 478
• Identification of Flexible Structures : a Gray Box Approach, FORRAI Alexandru; HASHIMOTO Seiji; FUNATO Hirohito; KAMIYAMA Kenzo, 02 Nov. 2000, 2000, 74, 5, 10
• Derivation of Modal Parameters of a Flexible Structures Based on Multi-Decimation Identification Method, ISOJIMA Akihiro; HASHIMOTO Seiji; FUNATO Hirohito; KAMIYAMA Kenzo, 02 Nov. 2000, 電気学会研究会資料. SPC, 半導体電力変換研究会, 2000, 74, 1, 4
• Comparison of Characteristics between Partial State Feedback Compensation and Resonance Ratio Control in Torsional Vibration Suppression Control, HARA Kenji; HASHIMOTO Seiji; FUNATO Hirohito; KAMIYAMA Kenzo, 29 Oct. 1998, 電気学会研究会資料. SPC, 半導体電力変換研究会, 1998, 107, 21, 26
• System identification method for vibration control of structures., 橋本誠司; 山本磨人; 磯島彰宏; 船渡寛人; 神山健三, Aug. 1998, 電気学会産業応用部門大会講演論文集, 1998, 1, 421, 422
• Diagnosis for AC Drives : The Detection Approach of Faulty Converter Circuits, YAMAMOTO Kiyohito; HASHIMOTO Seiji; HARA Kenji; FUNATO Hirohito; KAMIYAMA Kenzou, 17 Jul. 1998, 電気学会研究会資料. SPC, 半導体電力変換研究会, 1998, 57, 27, 31
• Experiments of of Verification Two-Degree-of-Freedom Position Control with Learning Identification, YAMAMOTO Kiyohito; HASIMOTO Seiji; FUNATO Hirohito; KAMIYAMA Kenzo, 13 Jun. 1997, 電気学会研究会資料. SPC, 半導体電力変換研究会, 1997, 54, 1, 6
• Robust Vibration Suppression Control for Two-mass System by Identifying the System with Minor Control-loop., 橋本誠司; 船渡寛人; 神山健三, Mar. 1997, 電気学会全国大会講演論文集, 1997, 3, 3.167-3.168
• Position Control of Motor Drive Systems by Two-Degree-of-Freedom Control with Adaptive Control., 山本磨人; 橋本誠司; 船渡寛人; 神山健三, Mar. 1997, 電気学会全国大会講演論文集, 1997, 3, 3.158
• Robust Feedback Control Using Measurable State Variables Alone, HARA K; HASHIMOTO S; WATANABE N; FUNATO H; KAMIYAMA K, 27 Sep. 1996, 電気学会研究会資料. SPC, 半導体電力変換研究会, 1996, 97, 61, 68
• 3慣性共振系の制振制御に関する一考察 : 不確かさを陽に考慮したH_∞制御, 橋本 誠司; 國分 孝夫; 船渡 寛人; 神山 健三, 15 Dec. 1995, 1995, 28, 69, 76
• Vibration Suppression Characteristics for Two Mass System by One-order H.INF. Controller., 橋本誠司; 船渡寛人; 神山健三, Aug. 1995, 電気学会産業応用部門大会講演論文集, 1995, Pt 1, 313, 316

Books etc

• 現場で役立つ制御工学の基本（演習編）, 2017
• 現場で役立つ制御工学の基本（中国語翻訳本）, 2016
• 現場で役立つ制御工学の基本, 2012
• 電気電子回路, 2010

Presentations

• Retrofit Controller Design Using a Finite Impulse Response Representation and Reinforcement Learning, Negishi Kohei, Kawaguchi Takahiro, Hashimoto Seiji, SICE2022, Sep. 2022, English, International conference
• A Method of Reducing Impulse Voltage in Grid Connection, Zhenlin Wang, Qiaoliang Huang, Song Xu, Lijuan Wang, Wei jiang, Seiji Hashimoto, ICAEE2021, Dec. 2021, English, International conference
• Hardware in the loop Development System for Process Controls, Jie Bian, Xiang Peng, Wei Jiang, Song Xu, Seiji Hashimoto, Shuren Wang, ICAEE2021, Dec. 2021, English, International conference
• Application of Convolutional Neural Network for Recognition of Face Covered with Facemask, Amat Amir Basari Seiji Hashimoto, Song Xu, Muhammad Aiman Rohaizi, ICAEE2021, Dec. 2021, English, International conference
• Implementation of SLAM in RPLidar Application based on ICP Algorithm and KF Algorithm, Kan Ni, Seiji Hashimoto, Yu Cao, Takahiro Kawaguchi, ICAEE2021, Dec. 2021, English, International conference
• Optimal Predictive Direct Power Control for Active NPC Three-level Rectifier, Ting Yang, Seiji Hashimoto, Wei Jiang and Takahiro Kawaguchi, International Conference on Technology and Social Science 2021 (ICTSS 2021), Dec. 2021, English, Japan, International conference
• Machine Leaning-Based Diagnosis for Multi-Purpose Vending Machines, Yudai Ikenoya, Yu Cao, Takahiro Kawaguchi, Seiji Hashimoto and Takayuki Morino, International Conference on Technology and Social Science 2021 (ICTSS 2021), Dec. 2021, English, Japan, International conference
• A Series Resonant Induction Heating System with Voltage Modulation Topology, Zheng Wang, Xun Chen, Lijuan Wang, Song Xu, Wei Jiang and Seiji Hashimoto, International Conference on Technology and Social Science 2021 (ICTSS 2021), Dec. 2021, English, Japan, International conference
• A Half Bridge Complementary Double Coil Induction Heating System with Phase Shift Control Method, Liming Zhao, Xun Chen, Lijuan Wang, Song Xu, Wei Jiang and Seiji Hashimoto, International Conference on Technology and Social Science 2021 (ICTSS 2021), Dec. 2021, English, International conference
• A switching sequence model predictive direct torque control of IPM motors, Ting Yang, Seiji Hashimoto, Takahiro Kawaguchi and Wei Jiang, ICTSS2020, Dec. 2020, International conference
• A Novel Impulse Voltage Reduction Method for Reliable Grid Connection, Zhenlin Wang, Qiaoliang Huang, Song Xu, Lijuan Wang, Wei Jiang and Seiji Hashimoto, IEEE PEAS2021, Nov. 2021, International conference
• Distributed Realtime Simulator for DC Microgrids, Renjie Qi, Wei Jiang, Song Xu and Seiji Hashimoto, IEEE PEAS2021, Nov. 2021, International conference
• Control Design of a Lightweight Helmet Type Full-face Mask, Yu Cao, Song Xu, Seiji Hashimoto, Takahiro Kawaguchi, Yusaku Fujii, Akihiro Takita and Wei Jiang, ICTSS2020, Dec. 2020, International conference
• A Reference-model-based Neural Network Control Method for Multi-input Multi-output Temperature Control System, Yuan Liu, Song Xu, Seiji Hashimoto and Takahiro Kawaguchi, ICTSS2020, Dec. 2020, International conference
• Load-series Multi-port Power Converter and Centralized Power Allocation Method for a DC Microgrid Cluster, Lin-feng Sun, Wei Jiang, Seiji Hashimoto and Song Xu, Proc. of ICTSS2020, Dec. 2020, International conference
• Simulation Research on Three-Phase Isolation Energy Storage Converter for Electric Vehicle, Jie-yun Wang, Wei Jiang, Barry W. Williams, Seiji Hashimoto, ICTSS2020, Dec. 2020, International conference
• AI-Based Feedback Control Applicable to Process Control Systems, Seiji Hashimoto, Song Xu, Yuqi Jiang and Yuta Nishizawa, ICMEMIS2019, Dec. 2019, International conference
• Nonlinear Observer-Based Sensor Fusion of IMU and GPS for Self-Localization, Yu Cao, Kan Ni, Seiji Hashimoto, ICMEMIS2019, Dec. 2019, International conference
• A Neural Network-Based Framework for Control and Diagnosis in Industries, S. Hashimoto, 2019 International Conference on Industrial Applications of Big Data and Artificial Intelligence (BDAI 2019), Oct. 2019, International conference
• A Novel Reference Model-Based Neural Network Approach to a Temperature Control System, Song Xu, Seiji Hashimoto and Wei Jiang, BDAI2019, Oct. 2019, Domestic conference
• Development of Vibration-based Energy Harvesters and Their Application to Self-powered Systems, S. Hashimoto, International Conference on Technological and Social Innovations 2019(ICTSI2019), Jul. 2019, International conference
• Design of Model Predictive Control with Nonlinear Disturbance Observer for Electric Power Steering System, Yu Fujimura, Seiji Hashimoto, David Banjerdpongchai, SICE ISCS2019, Mar. 2019, International conference
• Pole-Zero Cancelation Method for Multi-input Multi-output Temperature Control system, S. Xu, and S. Hashimoto, ICTSS2018, Nov. 2018, International conference
• An Overview of Self-Powered Energy Harvester based on Vibration, S. Hashimoto, S. Matsumoto, A. Basari, K. Suto, H. Okada, H. Okuno, and Y. Kawashima, ICTSS2018, Apr. 2018, International conference
• Experimental Verification of Slow Mode Based Control Method with Decoupling Compensation for MIMO System, S. Xu, S. Hashimoto, T. Kihara, K. Izaki, and R. Ikeda, ICTSS2018, Apr. 2018, International conference
• A Design Method of Sliding Mode Controller for EPS System Combined With Vehicle Motion, Yu Fujimura, Yuta Matsumoto, and Seiji Hashimoto, ICTSS2018, Apr. 2018, International conference
• A Novel Multi-point Temperature Control Method Based on Slow Response Mode, S. Hashimoto, Y. Liu, K. Yoshida, K. Izaki, T. Kihara, R. Ikeda and W. Jiang, IEEE IECON2017, Nov. 2017, International conference
• Disturbance Rejection Evaluation of Slow-Mode Based Control for MIMO Delay System, Y. Jiang, L. Yuan, S.Xu, K. Yoshida, S. Hashimoto, K. Izaki, T. Kihara, R. Ikeda and W. Jiang, ICMEMIS2017, Nov. 2017, International conference
• A Flapping-Based Piezoelectric Power Generator for Bicycle Applications, T. Ishii, T. Iwase, S. Hashimoto, B. Homma, K. Suto, H. Okada, H. Okuno and S. Kumagai, IEEE ISIE2017, Jul. 2017, International conference
• Multi-point Temperature Control Method Based on Slow Response Mode, S. Hashimoto, Y. Liu, K. Yoshida, K. Izaki, H. Okada and R. Ikeda, IEEE AIM2017, Jul. 2017, International conference
• Sliding Mode Observer-based Precise Vehicle State Estimation for EPS Systems, S. Hashimoto, and Y. Fujimura, ICMEMIS2017, Apr. 2017, International conference
• DC Micro-Grid Contactless Power Supply System with Load Detecting Control Method, S. Xu, S. Hashimoto, and W. Jiang, ICMEMIS2017, Apr. 2017, International conference
• A non-intrusive magnetic energy scavanger for renewable power generation state monitoring, Wei Jiang, Jingying Lu, Seiji Hashimoto, Fulong Li and Zhengyu Lin, IEEE ICRERA2016, Nov. 2016, International conference
• Evaluation of Impact Mode-Based Piezoelectric Power Generator, S. Hashimoto, A. Basari, T. Iwase, B. Homma, H. Okada, H. Okuno, and S. Kumagai, IEEE ICIEA2016, Jun. 2016, International conference
• Evaluation on Mechanical Impact Parameters in Piezoelectric Power Generation, 10th Asian Control Conf. 2015 (ASCC2015), 2015
• Development of a Torque-Sensorless Viscometer for Food Processing Applications, 2015 Int. Conf. on Advanced Mechatronic Systems(ICAMechs2015), 2015
• 衝撃方式による圧電素子を用いた振動発電特性の評価, 電気学会第５回栃木支所・群馬支所合同研究発表会, 2015
• 振動発電用圧電デバイスの形状効果に対する実験解析, 電気学会第５回栃木支所・群馬支所合同研究発表会, 2015
• 電動パワーステアリングシステムの模擬試験装置の開発, 電気学会第５回栃木支所・群馬支所合同研究発表会, 2015
• 最大電力点追従制御法の振動発電への適用可能性, 平成２７年電気学会産業応用部門大会, 2015
• インピーダンス制御によるEPSシミュレータの開発, 平成２７年電気学会産業応用部門大会, 2015
• Evaluation on Mechanical Impact Parameters in Piezoelectric Power Generation, 10th Asian Control Conf. 2015 (ASCC2015), 2015
• Development of a Torque-Sensorless Viscometer for Food Processing Applications, 2015 Int. Conf. on Advanced Mechatronic Systems(ICAMechs2015), 2015
• Comparison and Evaluation of Vibration-Based Piezoelectric Power Generators, Int. Power Electronics Conf. (IPEC2014), 2014
• Analysis and Design of Power Management Scheme for an On-Board Solar Energy Storage System, Int. Power Electronics Conf. (IPEC2014), 2014
• Quantitative Investigation of Energy Conversion in Monolithic Cantilever-Based Piezoelectric Energy Harvester, IEEE Int. Power Electronics and Application Conf. and Exposition (PEAC'2014), 2014
• 振動発電デバイスの共周波数変化に対する効率比較, 電気学会第４回栃木支所・群馬支所合同研究発表会, 2014
• 高効率発電のための構造体に対する応力解析と実験検証, 電気学会第４回栃木支所・群馬支所合同研究発表会, 2014
• 振動発電用圧デバイスの最適形状に関する研究, 電気学会第４回栃木支所・群馬支所合同研究発表会, 2014
• 外乱オブザーバ補償を用いたXYステージによる多自由度加振装置の構築, 電気学会第４回栃木支所・群馬支所合同研究発表会, 2014
• ディジタル技術によるCD-SEMの知能化テンプレートマッチング手法, 電気学会第４回栃木支所・群馬支所合同研究発表会, 2014
• 圧電素子を用いたセルフンシグアクチュエータの基礎研究 圧電素子を用いたセルフンシグアクチュエータの基礎研究, 電気学会第４回栃木支所・群馬支所合同研究発表会, 2014
• 振動発電デバイスに対する荷重条件と高出力化の考察, 電気学会第４回栃木支所・群馬支所合同研究発表会, 2014
• インピーダンス整合を考慮した振動発電デバイスの発電効率改善, 平成２６年電気学会産業応用部門大会, 2014
• 多モード形状による高出力振動発電のための応力解析と実験検証, 平成２６年電気学会産業応用部門大会, 2014
• Experimental Analyses on L-Shape PZT Vibration Power Generator Operates in Bending-Shear Mode, 第57回自動制御連合講演会, 2014
• サーボシステムによる自動車振動の高精度再現手法, 第57回自動制御連合講演会, 2014
• 振動発電に対する車載用省電力機器のための整流回路の特性評価, 電気学会第５回栃木支所・群馬支所合同研究発表会, 2014
• Comparison and Evaluation of Vibration-Based Piezoelectric Power Generators, Int. Power Electronics Conf. (IPEC2014), 2014
• Analysis and Design of Power Management Scheme for an On-Board Solar Energy Storage System, Int. Power Electronics Conf. (IPEC2014), 2014
• Quantitative Investigation of Energy Conversion in Monolithic Cantilever-Based Piezoelectric Energy Harvester, IEEE Int. Power Electronics and Application Conf. and Exposition (PEAC'2014), 2014
• Experimental Analyses on L-Shape PZT Vibration Power Generator Operates in Bending-Shear Mode, 第57回自動制御連合講演会, 2014
• Multi-Mode and Multi-Axis Vibration Power Generation Effective for Vehicles, Proc. of IEEE-ISIE2013, 2013
• 振動発電用圧電デバイスの発電特性とインピーダンス整合, 電気学会第３回栃木支所・群馬支所合同研究発表会資料, 2013
• 振動発電用圧電デバイスの発電特性とエネルギー回生効率, 電気学会第３回栃木支所・群馬支所合同研究発表会資料, 2013
• 非線形システム同定法の精密ステージ制御への応用, 電気学会第３回栃木支所・群馬支所合同研究発表会資料, 2013
• モデル規範型ニューラルネットワークによる精密ステージの制御法, 電気学会制御研究会資料, 2013
• Digitally Controlled Multi-Phase Electronic Current Sink, Proc. of The 10th IEEE International Conference on Power Electronics and Drive Systems, 2013
• XY ステージによる自動車振動の高精度再現手法, 平成２５年電気学会産業応用部門大会, 2013
• 振動発電用圧電デバイスのインピーダンス整合とエネルギー回生効率, 平成２５年電気学会産業応用部門大会, 2013
• Evaluation of High-Efficiency Vibration Energy Regeneration with PZT Devices, 第56回自動制御連合講演会, 2013
• Multi-Mode and Multi-Axis Vibration Power Generation Effective for Vehicles, Proc. of IEEE-ISIE2013, 2013
• Digitally Controlled Multi-Phase Electronic Current Sink, Proc. of The 10th IEEE International Conference on Power Electronics and Drive Systems, 2013
• Evaluation of High-Efficiency Vibration Energy Regeneration with PZT Devices, 第56回自動制御連合講演会, 2013
• 自動車振動向け振動発電システムの開発, 電気学会第２回栃木支所・群馬支所合同研究発表会資料, 2012
• 自動車振動発電を目的としたPZTデバイスの基礎特性評価, 電気学会第２回栃木支所・群馬支所合同研究発表会資料, 2012
• 制御工学のための高度専門教育教材の開発, 電気学会第２回栃木支所・群馬支所合同研究発表会資料, 2012
• 共振負荷の周波数変動に対する適応制御法の構築, 電気学会第２回栃木支所・群馬支所合同研究発表会資料, 2012
• 自動車走行実験と振動解析結果, 電気学会第２回栃木支所・群馬支所合同研究発表会資料, 2012
• 外乱オブザーバに基づく内部モデル制御法の多入出力システムへの応用, 電気学会第２回栃木支所・群馬支所合同研究発表会資料, 2012
• 自動車振動再現のための三軸加振機の制御系構築, 電気学会第２回栃木支所・群馬支所合同研究発表会資料, 2012
• 自動車振動のための多モード振動発電デバイスの開発, 電気学会第２回栃木支所・群馬支所合同研究発表会資料, 2012
• ディジタル制御に基づくDIMC構造の実現とその適応化手法, 電気学会第２回栃木支所・群馬支所合同研究発表会資料, 2012
• 負荷変動にロバストなスイッチング電源のディジタル制御手法, 電気学会第２回栃木支所・群馬支所合同研究発表会資料, 2012
• 自動車振動に対する多モード振動発電デバイスの開発, 平成２４年電気学会全国大会講演論文集, 2012
• 自動車振動に対する多軸振動発電デバイスの開発, 平成２４年電気学会全国大会講演論文集, 2012
• 振動発電のための自動車走行実験とその解析, 平成２４年電気学会産業応用部門大会講演論文集, 2012
• 自動車用多モード振動発電装置の発電特性, 平成２４年電気学会産業応用部門大会講演論文集, 2012
• Development of a Power Generation Device for Multi-Mode Vibration in Automobiles, Prof. of ICAMechS2012, 2012
• Construction of Multi-Axis Vibration Control System for Vibration Reproduction in Vehicles, Prof. of ICAMechS2012, 2012
• Development of Multi-axis Vibration Power Generation Device for Automobiles, Prof. of ICAMechS2012, 2012
• Multi-Mode Vibration-Based Power Generation for Automobiles, Proc. of The 2012 IEEE-IAS Annual Meeting, 2012
• Adaptive Identification and Control for Digital Control-Based Switching Power Supply System, Proc. of Asia-Pacific Power and Energy Engineering Conference (APPEEC2012), 2012
• Identification and Power Electronic Module Design of a Solar Powered Hydrogen Electrolyzer, Proc. of Asia-Pacific Power and Energy Engineering Conference (APPEEC2012), 2012
• Development of a Power Generation Device for Multi-Mode Vibration in Automobiles, Prof. of ICAMechS2012, 2012
• Construction of Multi-Axis Vibration Control System for Vibration Reproduction in Vehicles, Prof. of ICAMechS2012, 2012
• Development of Multi-axis Vibration Power Generation Device for Automobiles, Prof. of ICAMechS2012, 2012
• Multi-Mode Vibration-Based Power Generation for Automobiles, Proc. of The 2012 IEEE-IAS Annual Meeting, 2012
• Adaptive Identification and Control for Digital Control-Based Switching Power Supply System, Proc. of Asia-Pacific Power and Energy Engineering Conference (APPEEC2012), 2012
• Identification and Power Electronic Module Design of a Solar Powered Hydrogen Electrolyzer, Proc. of Asia-Pacific Power and Energy Engineering Conference (APPEEC2012), 2012
• 外乱オブザーバに基づく内部モデル制御によるDPWMコンバータの制御法, 電気学会第１回栃木支所・群馬支所合同研究発表会資料, 2011
• ディジタル・アナログ混在スイッチング電源のリミットサイクル振動低減法, 平成２３年度電気学会産業応用部門大会講演論文集, 2011
• Generation of Optimal Voltage Reference for Digital Control-Based Switching Power Supply, Proc. of Asia-Pacific Power and Energy Engineering Conference (APPEEC2011), 2011
• Control System Design Using Actuators with Constraints on Time and Space Resolutions, Proc. of The 6th IEEE Conf. on Industrial Electronics and Applications (ICIEA2011), 2011
• 周波数追従機構を有するモデルベースド制御系の構築, 電気学会第１回栃木支所・群馬支所合同研究発表会資料, 2011
• 精密ステージに対する目標値追従性を考慮した可変構造制御時の過渡応答補償法, 電気学会第１回栃木支所・群馬支所合同研究発表会資料, 2011
• DPWMコンバータの入力電圧推定と出力電圧振動低減法, 平成２２年度電気学会全国大会講演論文集, 2011
• Generation of Optimal Voltage Reference for Digital Control-Based Switching Power Supply, Proc. of Asia-Pacific Power and Energy Engineering Conference (APPEEC2011), 2011
• Control System Design Using Actuators with Constraints on Time and Space Resolutions, Proc. of The 6th IEEE Conf. on Industrial Electronics and Applications (ICIEA2011), 2011
• 学習理論に基づく適応制御系の構築と状態推定法, 平成２１年度電気学会全国大会, 2010
• ディジタル制御に基づくスイッチング電源の振動低減手法, 平成２２年度電気学会産業応用部門大会, 2010
• Development of Intelligent Switching Power Supply Based on Advanced Digital Control, The 5th IEEE Conf. on Industrial Electronics and Applications (ICIEA2010), 2010
• 参照モデルと学習理論に基づいた一制御法, 平成２２年度電気学会産業応用部門大会, 2010
• 時間・空間分解能制約付きアクチュエータによる位置制御系の開発, 平成２１年度電気学会全国大会, 2010
• 遺伝的アルゴリズムに基づく摩擦力を考慮した非線形システムの同定法, 平成２１年度電気学会全国大会, 2010
• ディジタル制御に基づくスイッチング電源の最適目標電圧生成手法, 電気学会産業計測研究会資料, 2010
• Development of Intelligent Switching Power Supply Based on Advanced Digital Control, The 5th IEEE Conf. on Industrial Electronics and Applications (ICIEA2010), 2010
• Identification Model-Based Control System Design for Semiconductor Manufacturing Equipment, 4th IEEE Conf. on Industrial Electronics and Applications (ICIEA2009), 2009
• 目標軌跡を考慮した可変構造制御時の過渡応答補償法, 平成２０年度電気学会全国大会, 2009
• 一定振幅・離散時間入力に基づく位置制御法, 平成２０年度電気学会全国大会, 2009
• Synthesized Design of Flexible Structures for Semiconductor Manufacturing Equipments, 4th Int. Conf. on Experimental Mechanics (ICEM2009), 2009
• Identification Model-Based Control System Design for Semiconductor Manufacturing Equipment, 4th IEEE Conf. on Industrial Electronics and Applications (ICIEA2009), 2009
• Synthesized Design of Flexible Structures for Semiconductor Manufacturing Equipments, 4th Int. Conf. on Experimental Mechanics (ICEM2009), 2009
• 角度依存摩擦特性を考慮したシステム同定法に関する検討, 平成２０年度電気学会産業応用部門大会, 2008
• Model Predictive Control of Precision Stages with Nonlinear Friction, IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM2008), 2008
• Identification and Control of Precision XY Stages with Active Vibration Suppression System, 13th International Conference on Power Electronics and Motion Control Conference (EPE-PEMC2008), 2008
• Integrated Design and Control of Precision XY Stages with Active Vibration Isolator, 18th International Conference on Electrical Machines (ICEM'08)}, 2008
• Predictive Control of Piezoelectric Actuators with Friction Drive Mechanism, 2008 IEEE International Ultrasonics Symposium (IUS2008), 2008
• ディジタル制御に基づく汎用スイッチング電源の開発, 平成２０年度電気学会産業応用部門大会, 2008
• 一定振幅離散値入力を用いた機械共振系の振動抑制制御法, 日本機械学会関東支部ブロック合同講演会, 2008
• Model Predictive Control of Precision Stages with Nonlinear Friction, IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM2008), 2008
• Identification and Control of Precision XY Stages with Active Vibration Suppression System, 13th International Conference on Power Electronics and Motion Control Conference (EPE-PEMC2008), 2008
• Integrated Design and Control of Precision XY Stages with Active Vibration Isolator, 18th International Conference on Electrical Machines (ICEM'08)}, 2008
• Predictive Control of Piezoelectric Actuators with Friction Drive Mechanism, 2008 IEEE International Ultrasonics Symposium (IUS2008), 2008
• 可変忘却要素を用いた適応同定法による超精密ステージの摩擦補償法, 平成１９年度電気学会産業応用部門大会講演論文集, 2007
• スイッチング電源のロバストディジタル制御法に関する基礎研究, 平成１９年度電気学会産業応用部門大会講演論文集, 2007
• Disturbance Observer-Based Internal Model Control With An Adaptive Mechanism for Linear Actuators, SICE Annual Conference 2007, 2007
• Material Tester Using a Controlled Oscillator and an Inertial Mass, 8th International Symposium on Measurement Technology and Intelligent Instruments(ISMTII2007), 2007
• Analysis of a Small Generator Using Flux Tube Method and MATLAB, International Conference on Electrical Machines and Systems(ICEMS2007), 2007
• Materials Testers Using Micro-Newton Level Forces Based on the Levitation Mass Method (LMM), 2nd IEEE Conf. on Industrial Electronics and Applications(ICIEA2007), 2007
• High-Precision Control of Linear Actuators based on Internal Model Control, 2nd IEEE Conf. on Industrial Electronics and Applications(ICIEA2007), 2007
• Adaptive Friction Compensation Design for Submicrometer Positioning of High Precision Stage, 4th International Conference on Mechatronics(ICM2007), 2007
• High-Precision Control of Linear Actuators based on Internal Model Control, 14th International Conference on Mechatronics and Machine Vision in Practice 2007 (M2VIP2007), 2007
• Evaluation of the Dynamic Properties of a Voice Coil Motor (VCM), 14th International Conference on Mechatronics and Machine Vision in Practice 2007 (M2VIP2007), 2007
• Disturbance Observer-Based Internal Model Control With An Adaptive Mechanism for Linear Actuators, SICE Annual Conference 2007, 2007
• Material Tester Using a Controlled Oscillator and an Inertial Mass, 8th International Symposium on Measurement Technology and Intelligent Instruments(ISMTII2007), 2007
• Analysis of a Small Generator Using Flux Tube Method and MATLAB, International Conference on Electrical Machines and Systems(ICEMS2007), 2007
• Materials Testers Using Micro-Newton Level Forces Based on the Levitation Mass Method (LMM), 2nd IEEE Conf. on Industrial Electronics and Applications(ICIEA2007), 2007
• High-Precision Control of Linear Actuators based on Internal Model Control, 2nd IEEE Conf. on Industrial Electronics and Applications(ICIEA2007), 2007
• Adaptive Friction Compensation Design for Submicrometer Positioning of High Precision Stage, 4th International Conference on Mechatronics(ICM2007), 2007
• High-Precision Control of Linear Actuators based on Internal Model Control, 14th International Conference on Mechatronics and Machine Vision in Practice 2007 (M2VIP2007), 2007
• Evaluation of the Dynamic Properties of a Voice Coil Motor (VCM), 14th International Conference on Mechatronics and Machine Vision in Practice 2007 (M2VIP2007), 2007
• Modeling and Deterioration Diagnosis of Catalyst on Vehicle by Variable Forgetting Factor-Based On-Line Identification Method, Proc. of the 14th IFAC Symposium on System Identification(SYSID-2006), 2006
• An Engine Control Systems Design for Low Emission Vehicles by Generalized Predictive Control based on Identified Model, Proc. of IEEE International Conference on Control Applications(CCA2006), 2006
• 二段階設計法に基づく一般化予測制御によるエンジン制御系の設計, 第６回制御部門大会資料, 2006
• 内部モデル制御に基づく高応答・高精度制御手法, 電気学会産業計測研究会資料, 2006
• Variable Forgetting Factor-Based Friction Compensation Method of Precision Stages, SICE-ICASE International Joint Conference 2006, 2006
• Accurate Friction Compensation for a High Precision Stage using a Synchronous Piezoelectric Device Driver, the Advanced Motion Control 2006 Conference, 2006
• Modeling and Deterioration Diagnosis of Catalyst on Vehicle by Variable Forgetting Factor-Based On-Line Identification Method, Proc. of the 14th IFAC Symposium on System Identification(SYSID-2006), 2006
• An Engine Control Systems Design for Low Emission Vehicles by Generalized Predictive Control based on Identified Model, Proc. of IEEE International Conference on Control Applications(CCA2006), 2006
• Variable Forgetting Factor-Based Friction Compensation Method of Precision Stages, SICE-ICASE International Joint Conference 2006, 2006
• Accurate Friction Compensation for a High Precision Stage using a Synchronous Piezoelectric Device Driver, the Advanced Motion Control 2006 Conference, 2006
• Analysis of a Brushless DC Motor by the Method Coupling MATLAB/Simulink and Finite Element Method, ISHIKAWA TAKEO; HASHIMOTO SEIJI, Proc of International Power Electronics Conference (IPEC2005), Apr. 2005
• Gain-Scheduled Control of a High-Precision Stage for Continuous-Path Tracking, Proc of International Power Electronics Conference (IPEC2005), 2005
• Variable Frequency Control for SPIDER-Driven Ultra-Precision Stages, Proc. of the 16th International Federation of Automatic Control World Congress(IFAC'05), 2005
• SPIDER駆動精密ステージの位置決め制御における実験的摩擦補償法, 電気学会産業計測制御研究会資料, 2005
• 非共振型超音波アクチュエータを用いた精密ステージの連続軌跡追従制御系の構成法, 電気学会産業計測制御研究会資料, 2005
• 遺伝的アルゴリズムを用いた集中巻ブラシレスDCモータのロータ設計, 平成１７年電気学会全国大会講演論文集, 2005
• DSPを用いたランダムPWM法による誘導機の振動特性, 平成１７年電気学会全国大会講演論文集, 2005
• 半導体産業の精密ステージとモーションコントロール, 平成１７年度電気学会産業応用部門大会講演論文集, 2005
• Fast Motion Control of High Precision Stage using SPIDER, 第９回運動と振動の制御シンポジウム(D&D2005)資料, 2005
• 適応オブザーバに基づく次世代露光装置用超精密ステージの静止摩擦補償法, 電気学会産業計測研究会資料, 2005
• Gain-Scheduled Control of a High-Precision Stage for Continuous-Path Tracking, Proc of International Power Electronics Conference (IPEC2005), 2005
• Variable Frequency Control for SPIDER-Driven Ultra-Precision Stages, Proc. of the 16th International Federation of Automatic Control World Congress(IFAC'05), 2005
• Analysis of a PM Motor Drive System by a Coupled Method with MTLAB and FEM, ISHIKAWA TAKEO; HASHIMOTO SEIJI, The 11th biennial IEEE conference on Electromagnetic Field Computation, Jun. 2004
• Ultra-Precision Stage Control Based on Friction Model of Non-Resonant Ultrasonic Motor, Proc. of the 8th IEEE International Workshop on Advanced Motion Control (AMC’04), 2004
• 摩擦モデルに基づく非共振型超音波アクチュエータ駆動精密ステージの一制御法, 電気学会産業計測制御研究会資料, 2004
• 外乱オブザーバを用いたマスター・スレーブ系のモデル化と制御, 平成１６年電気学会全国大会講演論文集, 2004
• 振動制御のための柔軟構造物の高精度モデリング手法, 平成１６年電気学会全国大会講演論文集, 2004
• 非共振型アクチュエータを用いた超精密ステージに対する摩擦特性の検証と位置制御法, 平成１６年電気学会全国大会講演論文集, 2004
• MATLABと有限要素法による永久磁石同期電動機駆動システムの解析, 平成１６年電気学会全国大会講演論文集, 2004
• On-Line Identification Method of Static Friction for Ultra-Precision Positioning, Proc. of the SICE Annual Conference 2004, 2004
• 超精密ステージ駆動用非共振型超音波アクチュエータの周波数可変制御法, 平成１６年電気学会産業応用部門大会講演論文集, 2004
• 非共振型アクチュエータ(SPIDER)を用いた精密ステージの高速位置決め制御法, 平成１６年度電気関係学会東北支部連合大会講演論文集, 2004
• 非共振型アクチュエータを用いた精密ステージの位置制御法, 第４７回自動制御連合講演会資料, 2004
• Ultra-Precision Stage Control Based on Friction Model of Non-Resonant Ultrasonic Motor, Proc. of the 8th IEEE International Workshop on Advanced Motion Control (AMC’04), 2004
• On-Line Identification Method of Static Friction for Ultra-Precision Positioning, Proc. of the SICE Annual Conference 2004, 2004
• Development of an Ultra-Precision Stage Control System Using Nonresonant Ultrasonic Motor, Proc. of the 29th Annual Conference of the IEEE Industrial Electronics Society(IECON'03), 2003
• PM型リニアモータの推力特性の最適設計, 平成１５年電気学会全国大会講演論文集, 2003
• 次世代超精密ステージ機構用アクチュエータの位置制御系の開発, 電気学会産業計測制御研究会資料, 2003
• 数種類の埋込み磁石構造電動機の特性比較, 電気学会研究会資料, 2003
• 静止摩擦を考慮した超精密ステージによる位置制御法, 平成１５年電気学会産業応用部門大会講演論文集, 2003
• Development of an Ultra-Precision Stage Control System Using Nonresonant Ultrasonic Motor, Proc. of the 29th Annual Conference of the IEEE Industrial Electronics Society(IECON'03), 2003
• Derivation of Modal Parameters of a Flexible Structure based on the Multi-Decimation Identification Method, Proc. of the IEEE International Symposium on Industrial Electronics(ISIE 2002), 2002
• Construction of Navigation and Control Systems of A Large-Scale Unmanned Helicopter Based on Identified Model, Proc. of the 15th International Federation of Automatic Control World Congress(IFAC'02), 2002
• 自律飛行を目的とした大型無人ヘリコプタの航法・制御系の構成, 日本機械学会関東支部第８期総会講演会資料, 2002
• センサフュージョンによる飛行状態推定システムの構築, 平成１４年電気学会産業応用部門全国大会講演論文集, 2002
• 制御入力飽和を考慮したロバスト飛行制御系設計法, 平成１４年電気学会産業応用部門全国大会講演論文集, 2002
• Derivation of Modal Parameters of a Flexible Structure based on the Multi-Decimation Identification Method, Proc. of the IEEE International Symposium on Industrial Electronics(ISIE 2002), 2002
• Construction of Navigation and Control Systems of A Large-Scale Unmanned Helicopter Based on Identified Model, Proc. of the 15th International Federation of Automatic Control World Congress(IFAC'02), 2002
• Design of Robust Controllers with Constraints on the Control Signal -Application for Brushless D.C. Drives, HASHIMOTO SEIJI, Proc. of the 27th Annual Conference of the IEEE Industrial Electronics Society(IECON'01), Nov. 2001
• Expert System Based Diagnosis of a Two-Mass System Using Advanced Identification Techniques, HASHIMOTO SEIJI, Proc of 3rd IEEE-SDEMPED Conference, Sep. 2001
• Flexible Structure's Identification and Robust Vibration Suppression Control, HASHIMOTO SEIJI, Proc. of 9-th EPE Conference, Aug. 2001
• Robust Control Design Based on Identified Model for Autonomous Flight System of an Unmanned Helicopter, Proc. of the 27th Annual Conference of the IEEE Industrial Electronics Society(IECON'01), 2001
• Robust Control Design Based on Identified Model for Autonomous Flight System of an Unmanned Helicopter, Proc. of the 27th Annual Conference of the IEEE Industrial Electronics Society(IECON'01), 2001
• Active Vibration Suppression of Flexible Structures with Force Limitation ---Different Control Approaches, Proc. of the 7th International Conference on Optimization of Electrical and Electronic Equipments (OPTIM2000), 2000
• Implementation of a Fuzzy Controller for Vibration Suppression -Application for Flexible Structures, Proc. of the 9th International Conference on Power Electronics and Motion Control (PEMC2000), 2000
• Fuzzy Logic Based Vibration Suppression Control of Flexible Structures, Proc. of the 6th International Workshop on Advanced Motion Control (AMC2000), 2000
• System Identification Experiments on a Large-Scale Unmanned Helicopter for Autonomous Flight, Proc. of IEEE International Conference on Control Applications(CCA2000), 2000
• Active Vibration Suppression Control of Flexible Structures by Scheduled H infinity Control Considering the Control Force Saturation, Proc. 35th IEEE-IAS Annual Meeting, 2000
• Implementation of a Fuzzy Controller for Vibration Suppression -Application for Flexible Structures, Proc. of the 9th International Conference on Power Electronics and Motion Control (PEMC2000), 2000
• Active Vibration Suppression of Flexible Structures with Force Limitation ---Different Control Approaches, Proc. of the 7th International Conference on Optimization of Electrical and Electronic Equipments (OPTIM2000), 2000
• Fuzzy Logic Based Vibration Suppression Control of Flexible Structures, Proc. of the 6th International Workshop on Advanced Motion Control (AMC2000), 2000
• System Identification Experiments on a Large-Scale Unmanned Helicopter for Autonomous Flight, Proc. of IEEE International Conference on Control Applications(CCA2000), 2000
• Active Vibration Suppression Control of Flexible Structures by Scheduled H infinity Control Considering the Control Force Saturation, Proc. 35th IEEE-IAS Annual Meeting, 2000
• Two-input Disturbance Observer Design in Electric Power Steering System, Yu Fujimura, Tomokazu Abe, Seiji Hashimoto, Mitsunobu Kajitani, Jingying Lu and Wei Jiang, ICTSS2017, International conference
• Online Learning Algorithm-Based High-Efficient Control of IPM Motors, Ting Yang, Ryosuke Honda, Takahiro Kawaguchi, Seiji Hashimoto, Song Xu, Masayuki Kigure and Makoto Shibuya, IEEE ICPS2021, International conference
• Design of Reference-model-based Recurrent Neural Network Control for Temperature Control System, Yuan Liu, Song Xu, Shinya Kobori, Seiji Hashimoto and Takahiro Kawaguchi, IEEE ICPS2021, International conference
• エンコーダ・デコーダ型ニューラルネットワークによる廃棄物処理プラントの運転予測, 新井駿介; 川口貴弘; 橋本誠司; 金子啓一, 第13回計測自動制御学会制御部門マルチシンポジウム予稿集, Mar. 2026
• 流体循環型温度制御システムに対するデータ駆動制御の初期検討, 川上和真; 川口貴弘; 橋本誠司; 干川達也; 向山洋, 第13回計測自動制御学会制御部門マルチシンポジウム, Mar. 2026
• 符号化・予測モデルによる時系列の潜在表現抽出法の検討, 齋藤伶弥; 川口貴弘; 横越祐哉; 橋本誠司, 第13回計測自動制御学会制御部門マルチシンポジウム, Mar. 2026
• 人工知能を用いた廃棄物処理プラントの運転終了確率予測, 大塚寛太; 新井駿介; 川口貴弘; 橋本誠司; 金子啓一, 電気学会第16回群馬・栃木支所合同研究発表会, Mar. 2026
• 騒音空間での多点アクティブノイズコントロールシステムの構築, 宮下茉実; カンヴァンハン; 高橋洋平; 川口貴弘; 橋本誠司; 北爪三智男; 岩瀬勉, 電気学会第16回群馬・栃木支所合同研究発表会, Mar. 2026
• サンプルリターンカプセル安定性評価のための磁気浮上モータ開発とその知能化制御法, 飯塚春弥; 王震林; 高橋洋平; 橋本誠司; 川口貴弘; 小澤宇志; 栗田伸幸, 電気学会第16回群馬・栃木支所合同研究発表会, Mar. 2026
• 物理的解釈に基づく鉄鋼プラントにおける仕上圧延プロセスのモデリング, 新井匠人; 橋本誠司; 高木山河; 伊藤奨; 川口貴弘, 電気学会第16回群馬・栃木支所合同研究発表会, Mar. 2026
• つくばチャレンジ2025における群馬大学 橋本・川口研×両毛システムズの取り組み, 黒岩大雅; 高柳和輝; 金井美緒; 續木伸吾; 橋本誠司; 川口貴弘; 坂巻雄輔, 第19 回つくばチャレンジシンポジウム, Feb. 2026
• AI-Augmented PI Control for Robust Operation of Power Electronic Converters, 聶 鵬強; 橋本 誠司; 川口 貴弘, 第68回自動制御連合講演会, Nov. 2025
• Integrated Control and Diagnostic Approach for a Series-Parallel PV-Storage System Using Recycled Batteries and FSBB Power Architecture, 周 峰; 橋本 誠司; 川口 貴弘, 第68回自動制御連合講演会, Nov. 2025
• 小型水素燃料電池の空気コンプレッサーに利用する超高速モータの制御に関する研究, 張 浩浩; 弓仲 康史; 橋本 誠司, 第42回センシングフォーラム 計測部門大会, Sep. 2025
• 大規模言語モデルによる自律移動ロボットのインテリジェントな障害物回避判断手法の検討, 高柳 和輝; 黒岩 大雅; 金井 美緒; 續木 伸吾; 橋本 誠司; 川口 貴弘; 石井 孝典, 第42回センシングフォーラム 計測部門大会, Sep. 2025
• 電磁ブレーキのないモータによる自律走行ロボットの速度制御手法, 黒岩 大雅; 高柳 和輝; 金井 美緒; 續木 伸吾; 橋本 誠司; 川口 貴弘; 石井 孝典, 第42回センシングフォーラム 計測部門大会, Sep. 2025
• Transformerによる廃棄物処理プラントの運転予測と異種型データのモデル適用に関する検討, 新井駿介; 川口貴弘; 橋本誠司; 金子啓一; 永島拓海, 2025年電気学会産業応用部門大会, Aug. 2025
• スライド速度に基づくプレス生産設備および金型の故障予知手法の検討, 久木田聡一朗; 川口貴弘; 橋本誠司; 大堂琳太郎; 米澤侑生; イギレザ, 2025年電気学会産業応用部門大会, Aug. 2025
• 粒子群最適化を用いた流体の循環を伴う温度制御システムのモデリングと制御器設計, 川上和真; 川口貴弘; 橋本誠司; 干川達也; 向山 洋, 2025年電気学会産業応用部門大会, Aug. 2025
• 操舵支援時におけるドライバモデル構築のためのドライバトルクの推定, 山岸洸太; 川口貴弘; 橋本誠司; 小山哲司; 香西俊彦; 岩瀬 勉; 上林俊樹; 椿 貴弘; 杉山大貴; 塚崎裕一郎, 2025年電気学会産業応用部門大会, Aug. 2025
• はやぶさカプセルのロール減衰測定用磁気浮上装置の小型化, 高橋洋平; 栗田伸幸; 王 震林; 橋本誠司; 小澤宇志, 電気学会第15回栃木・群馬支所合同研究発表会, Mar. 2025
• カーネルに基づく正則化を用いたμ-マルコフモデルの逐次同定法, 鈴木湧也; 矢嶋優樹; 川口貴弘; 橋本誠司, 電気学会第15回栃木・群馬支所合同研究発表会, Mar. 2025
• 正則化を用いたシステム同定法による鉄鋼圧延プロセスのモデリング, 魏 馨明; 川口貴弘; 奥澤竜也; 橋本誠司; 高木山河; 伊藤 奨, 電気学会第15回栃木・群馬支所合同研究発表会, Mar. 2025
• 流体の循環を伴う温度制御システムのモデリング, 川上和真; 川口貴弘; 橋本誠司; 干川達也; 向山 洋, 電気学会第15回栃木・群馬支所合同研究発表会, Mar. 2025
• 人工知能を用いたシステム同定法による廃棄物処理プラントの運転予測, 新井駿介; 三間健太郎; 川口貴弘; 橋本誠司; 金子啓一; 永島拓海, 電気学会第15回栃木・群馬支所合同研究発表会, Mar. 2025
• 拡張カルマンフィルタを用いた3センサのフュージョンによる自己位置推定法の検討, 高柳和輝; 黒岩大雅; 吉田貴翔; 川口貴弘; 橋本誠司; 石井孝典, 電気学会第15回栃木・群馬支所合同研究発表会, Mar. 2025
• 非侵襲型脳波計を用いた脳波分類における人工知能の活用, 齋藤伶弥; 大平周生; 横越祐哉; 川口貴弘; 橋本誠司; 木下新一, 電気学会第15回栃木・群馬支所合同研究発表会, Mar. 2025
• ニューラルネットワークに基づく非侵襲デバイスによる脳波の分類, 横越祐哉; 大平周生; 齋藤伶弥; 川口貴弘; 橋本誠司; 木下新一, 第67回自動制御連合講演会, Nov. 2024
• Transformer を用いた廃棄物処理場の運転予測, 三間健太郎; 川口貴弘; 金子啓一; 永島拓海; 橋本誠司, 第67回自動制御連合講演会, Nov. 2024
• データ駆動制御に基づく複数の制御器を持つシステムの一設計法, 川上和真; 川口貴弘; 橋本誠司; 干川達也; 向山洋, 2024年電気学会産業応用部門大会, Aug. 2024
• カメラを用いた流入量の解析によるプレス生産設備および金型の故障予知に関する一考察, 久木田聡一朗; ハニフ・アリ・ハサナイン; 川口貴弘; 橋本誠司; 大堂琳太郎; 岩瀬健二, 2024年電気学会産業応用部門大会, Aug. 2024
• 電磁ブレーキ非搭載のブラシレスモータを用いた自律走行ロボットHashBotの開発, 黒岩大雅; 吉田貴翔; 高柳和輝; 橋本誠司; 川口貴弘; 石井孝典, 第18回つくばチャレンジシンポジウム, Feb. 2024

Industrial Property Rights

• Patent right, 国際出願PCT/JP2021/028558
• Patent right, 特願2020-177304
• Patent right, 特願2020-113097, 特許第7616624
• Patent right, 特願2020-113097, 特許第7557314号
• Patent right, -
• Patent right, -
• Patent right, -
• Patent right, -
• Patent right, -
• Patent right, -
• Patent right, -
• Patent right, 特願PCT/JP2019/17878, 26 Apr. 2019, -
• Patent right, -
• Patent right, -
• Patent right, -
• Patent right, 特願国際出願PCT/JP2021/028558, 03 Aug. 2021
• Patent right, 特願2020-177304, 22 Oct. 2020
• Patent right, 特願2020-113097, 30 Jun. 2020
• Patent right, 特願2023-221022
• Patent right, 特願2023-109060
• Patent right, 特願2022-193803

Awards

• Mar. 2026
• Mar. 2026
• Mar. 2026
• Best student paper award, Yang, Song Xu, Wei Jiang and Seiji Hashimoto, A Novel Coupled Inductance Based High-gain DC/DC Converter Applicable for HEV DC Systems, ICTSS2024, Dec. 2024
• Electrical Science and Technology Encouragement Award, Nov. 2025, International academic award
• Best paper award, Haohao Zhang, Yasushi Yuminaka and Seiji Hashimoto, Analysis of Motion Control Strategy for an Ultra High-Speed Single-Phase BLDC Motor, ICTSS2024, Dec. 2024, International academic award
• Minister of Education, Culture, Sports, Science and Technology Award, Nov. 2025, International academic award
• 31st Int. Invention, Innovation and Technology Exhibition 2020 (ITEX2020) Gold medal, Low Sampling Rate Cutting Machine's Vibration Inspection via CNN, Nov. 2020
• UTeMEX2019 Gold medal, Fault Diagnosis with Convolutional Neural Network, Oct. 2019, International society, Malaysia
• Apr. 2019, Others
• Best paper award, Taiga Kuroiwa;Ni Kan;Takahiro Kawaguchi;Seiji Hashimoto;Takao Isogai;Hiroshi Soga;Haohao Zhang, Object Tracking Algorithm for Person-Following Autonomous Robots, 国際会議ICTSS2023, Dec. 2023
• Best paper award, Linfeng Sun;Wei Jiang;Seiji Hashimoto;Takahiro Kawaguchi;Ming Huang, Load-series Partial-power Converter for DC Power Management, 国際会議ISEEC2022&ICTSS2022, Dec. 2022
• Best paper award, Amat Amir Basari;Seiji Hashimoto;Song Xu;Muhammad Aiman Rohaizi, Application of Convolutional Neural Network for Recognition of Face Covered with Facemask, 国際会議ICAEE2021, Dec. 2021
• Best paper award, T. Yang;S. Hashimoto;W. Jiang;T. Kawaguchi, Optimal Predictive Direct Power Control for Active NPC Three-level Rectifier, 国際会議ICTSS2021, Dec. 2021
• Gold medal, A. Basari;S. Hashimoto, Low Sampling Rate Cutting Machine's Vibration Inspection via CNN, 31st Int. Invention, Innovation and Technology Exhibition 2020 (ITEX2020), Nov. 2020
• Gold medal, A. Basari;S. Hashimoto, Fault Diagnosis with Convolutional Neural Network, UTeMEX2019, Oct. 2019
• Apr. 2019
• Nov. 2025
• Nov. 2025
• Best paper award, Haohao Zhang, Yasushi Yuminaka and Seiji Hashimoto, Analysis of Motion Control Strategy for an Ultra High-Speed Single-Phase BLDC Motor, 国際会議ICTSS2024, Dec. 2024
• Best student paper award, Yuqing Yang;Song Xu;Wei Jiang;Seiji Hashimoto, A Novel Coupled Inductance Based High-gain DC/DC Converter Applicable for HEV DC Systems, 国際会議ICTSS2024, Dec. 2024

Research Projects

• 2025
• 2025
• 2025
• 2025
• 2025
• 2025
• 2021
• 2021
• 2021
• 2021
• 2020
• 2020
• 2020
• 2019
• 2019, 2021
• 2019
• 2018
• 2018
• 2018
• 2018, 2019
• 2017
• 2016, 2018
• 2016, 2017
• 2016, 2017
• 2015
• 2015
• 2015
• 2015
• 2014
• 2014
• 2014
• 2014, 2015
• 2012
• 2012, 2013
• 2011
• 2011
• 2011, 2012
• 2009
• 2010
• 2018
• 2019
• Comprehensive Control Method Considering Mechanism of Disturbance Generation, Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research, Grant-in-Aid for Scientific Research (C), Okayama University, 01 Apr. 2023, 31 Mar. 2026, 23K03729

  対象リソースIRI
• Development of AI technology that integrates control, estimation, and diagnosis in advanced industrial fields, Hashimoto Seiji, Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research, Grant-in-Aid for Scientific Research (C), Gunma University, Apr. 2022, Mar. 2025, In this study, we established a methodology for integrating evidence-based AI technologies into control, estimation, and diagnostic systems, and demonstrated its effectiveness in collaboration with the industrial sector. We developed techniques for assigning physical meaning to neural network structures, pruning methods, and anomaly detection and prediction using convolutional neural networks and Transformers. These were validated across a wide range of real-world control targets, including motor control systems, temperature regulation systems, factory production equipment, and waste treatment facilities. Over the three-year period, we achieved 15 peer-reviewed publications, 1 patent application, and numerous conference presentations, thereby proposing performance enhancement strategies and implementation guidelines for AI-based control systems in industrial applications., 22K04150

  対象リソースIRI
• 2023, 2024
• 2022, 2024
• 2021, 2024, Coinvestigator
• 2024
• 2024
• 2021, 2023
• 2021, 2023
• 2021, 2022
• 2021, 2022
• 2022
• 2022
• 2022
• 2021
• 2021
• Oct. 2020
• Development of vibration power generation-based self-contained power supply system considering energy management, Hashimoto Seiji, Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research, Grant-in-Aid for Scientific Research (C), Gunma University, 01 Apr. 2017, 31 Mar. 2020, The purpose of this research is the development of the self-contained power supply system by the vibration power generation considering the energy management. For this purpose, various power generation structures for higher output have been proposed, and the power management system considering the driving load for the generated power has been constructed. Moreover, the durability evaluation of the developed power generator has been conducted. As an application, we have developed a vibration power generator that utilizes mechanical vibrations in the factory, and built a system that drives a wireless sensor node and diagnoses equipment failures in a self-contained manner. In addition, the power generation shoe that can be used at disaster medical field has been proposed, and the power supply system of the generated power to mobile phones has been developed., 17K00660

  対象リソースIRI
• 2020
• 2019
• 2019
• 2019
• 2019
• 2019
• 2018
• 2018
• 2018
• 2018
• 2018
• Development of high efficiency vibration energy regeneration technology and its application to self-powered systems, Hashimoto Seiji, Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (C), Grant-in-Aid for Scientific Research (C), Gunma University, 01 Apr. 2014, 31 Mar. 2017, The purpose of this research is to develop an efficient vibration power generator for self-powered applications based on the proposed multi-axis multi-mode structure. To achieve this purpose, considering uniform stress distribution, a structure that maximizes regenerative energy with high durability has been proposed. Moreover, we have proposed an indirect impact-based power generator which can apply to a broadband vibration frequency. The effectiveness of the proposed power generator has been experimentally verified by the vehicle vibration. For the practical application, a power management circuit has been developed, and then the combined system with the power generator has been applied to wireless transmission equipment, bicycle pedal, saddle etc., 26340098

  対象リソースIRI
• 2017
• 2017
• 2017
• 2015
• 2015
• 2015
• 2015
• 2014
• 2014
• 2014
• 2014
• Intelligent Control Technologies for Digital-Analog Hybrid Switching Power Supply System, HASHIMOTO Seiji, Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research Grant-in-Aid for Young Scientists (B), Grant-in-Aid for Young Scientists (B), Gunma University, 2011, 2013, The purpose of this research is to develop a new intelligent general-purpose switching power supply system by introducing a digital control scheme to the system. To achieve this purpose, a control method with single design parameter which able to control multi-channel and multi-level voltage output system is proposed. Here, by introducing an adaptive function, it is experimentally verified that control performance degradation caused by the nonlinearity behavior in the system such as from input voltage perturbation, load variation, AD/DA resolution error and switching regulation could adaptively be compensated. Moreover, realization method of low cost, robust and appropriately considered AD/DA resolution controller for limit-cycle variation of output voltage that is caused by digitization is proposed., 23760383

  対象リソースIRI
• 2013
• 2012
• 2011
• 2009
• Development of high precision material testing method using the Levitation Mass Method, FUJII Yusaku; YAMAGUCHI Takao; HASHIMOTO Seiji; YOKOTA Masayuki, Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B), Grant-in-Aid for Scientific Research (B), Gunma University, 2007, 2008, 19360185

  対象リソースIRI
• Practical application research of large-scale ultra-precision stages driven by non-resonant type actuator for next-generation semiconductor manufacturing, HASHIMOTO Seiji, Japan Society for the Promotion of Science, Grants-in-Aid for Scientific Research Grant-in-Aid for Young Scientists (B), Grant-in-Aid for Young Scientists (B), Gunma University, 2006, 2008, 18760315

  対象リソースIRI
• 2003, 2005, 15760310

  対象リソースIRI
• 2001, 2002, 13750433

  対象リソースIRI
• 1998, 1998, 96J01842

  対象リソースIRI
• Apr. 2026, Mar. 2029, Principal investigator, 26K07436

  対象リソースIRI